Search found 61 matches

by Malcurin
Wed Mar 04, 2015 3:18 am
Forum: openTx model setup
Topic: Throttle curve for Multirotor
Replies: 1
Views: 5212

Throttle curve for Multirotor

Can anyone help me, I am trying to setup a throttle curve for a Mini quad, atm after setting the endpoints calibrating the esc's and in a Naze32 my hover is at 10% i am running cleanflight and also running the latest firmware in my Taranis i want to make that throttle hover somewhere more like 50% a...
by Malcurin
Mon Feb 24, 2014 10:13 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: KK 2.1 setup on er9x
Replies: 1
Views: 3854

Re: KK 2.1 setup on er9x

For the self level on a KK 2.1
Set Source = FULL, weight = -125, Switch = GEA then Exit - sets self level on
Set Source = FULL, weight = 0, Switch = !GEA then Exit - sets self level off

and i also got the rates thing too , found then after a few hours of looking lol
by Malcurin
Mon Feb 24, 2014 6:46 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: KK 2.1 setup on er9x
Replies: 1
Views: 3854

KK 2.1 setup on er9x

Greetings, I am trying to setup a KK2.1 board and i have all the channels setup and working how i want, I am just trying to setup a self level switch ( on by default and off when i flick it ) if this is possible I'm new to multirotor flying any help would be fantastic Im also looking to use the 3 po...
by Malcurin
Wed Aug 22, 2012 9:35 am
Forum: er9x
Topic: Er9x and RC Simulators
Replies: 27
Views: 18066

Re: Er9x and RC Simulators

I have done 6 and 8 and in Phoenix they work for me with the Phoenix Hobbyking adapter
by Malcurin
Tue Aug 21, 2012 10:33 am
Forum: er9x
Topic: Er9x and RC Simulators
Replies: 27
Views: 18066

Re: Er9x and RC Simulators

What version of Er9X are you using and since you have the resistor mod in you don't need to enable trainer mode
also what simulator are you trying to use?
by Malcurin
Wed Aug 08, 2012 10:56 am
Forum: The Pickled Gnu (The Pub)
Topic: Buddy codes for Hobbyking
Replies: 24
Views: 17840

Re: Buddy codes for Hobbyking

Nope i work in the yards at a meat works herding Calf's to there deaths so Russia can have Veil
by Malcurin
Wed Aug 08, 2012 6:11 am
Forum: The Pickled Gnu (The Pub)
Topic: Buddy codes for Hobbyking
Replies: 24
Views: 17840

Re: Buddy codes for Hobbyking

and more Frsky ones to come, I get $200nz a week to spend on the hobby ATM Muwahahaha i love my new Job
by Malcurin
Tue Aug 07, 2012 3:18 pm
Forum: The Pickled Gnu (The Pub)
Topic: Buddy codes for Hobbyking
Replies: 24
Views: 17840

Re: Buddy codes for Hobbyking

FrSky FVAS-01 Telemetry Variometer Sensor http://rcsearch.info/hobbyking/thumbnails/19975.jpg $9.14 $7.83* (buddy<br>price 14%, -$1.31) FrSky Lipo Voltage Sensor FLVS-01 http://rcsearch.info/hobbyking/thumbnails/22693(1).jpg $10.92 $9.51* (buddy<br>price 13%, -$1.41) FrSky D8R-XP 2.4Ghz Receiver (w...
by Malcurin
Tue Jul 24, 2012 9:24 am
Forum: Electronic Mods
Topic: New Wiki page for full hardware mod
Replies: 15
Views: 11222

Re: New Wiki page for full hardware mod

You dont even need the trainer Mod for that anymore, I just took my stock module out and placed a frsky one in, but i just used the firmware for it , it does work 100% with the stock module inside have been using the stock module with the firmware and no mod done on a simulator for a few months , wo...
by Malcurin
Thu Jul 19, 2012 9:39 am
Forum: PROGRAMMERS
Topic: Ethernet Cable for Data Link
Replies: 6
Views: 6471

Re: Ethernet Cable for Data Link

Or even a hard drive 40 pin cable, IDE the old style they are good
by Malcurin
Thu Jul 19, 2012 8:43 am
Forum: PROGRAMMERS
Topic: Ethernet Cable for Data Link
Replies: 6
Views: 6471

Re: Ethernet Cable for Data Link

i have that inside mine Westy did the mod, The cable is very stiff and tends to come away from the solder very easily, my advise is don't use it, get some softer cable from an electronics store and save yourself some re soldering time
by Malcurin
Mon Jul 16, 2012 5:14 pm
Forum: Hardware Mods
Topic: Ultrafire in the transmitter
Replies: 30
Views: 20842

Re: Ultrafire in the transmitter

I ordered my 9x from HobbyKing and 10 days ago and I'm anxiously waiting for its arrival. I noticed several youtube videos of people using 3s lipos in their 9x radios. From what I could tell that 8 alkaline cells would reach 12vdc respectively. From my experiences in electronics most things can tol...
by Malcurin
Mon Jul 16, 2012 3:13 am
Forum: Hardware
Topic: 9x Cant Get Elevator Working
Replies: 17
Views: 9878

Re: 9x Cant Get Elevator Working

http://crashtesthobby.com/instructions/ ... lying-wing
use this link if its for stock, helped me with my wing before i discovered ER9X
by Malcurin
Thu Jul 12, 2012 5:07 am
Forum: RF MODULES
Topic: Module or MOD for turnigy 9x
Replies: 10
Views: 13213

Re: Module or MOD for turnigy 9x

I just did the same thing your asking, I brought the telemetry DIY module that you have to solder into the transmitter with the external screen and a receiver I choose this way so my transmitter will still look the same after changing to Frsky and not have a second antenna poking from it out the bac...
by Malcurin
Sat Jul 07, 2012 8:28 pm
Forum: Hardware
Topic: Loading Templates ?
Replies: 5
Views: 4204

Re: Loading Templates ?

yes you can there is a 2 little buttons up the top in EEPE that look like computer chips that say when you hover your mouse over them " Read Memory from TX" and " Write Memory from TX" they will let you save what you have on there and write a new one too there Yeah its the easy w...
by Malcurin
Sat Jul 07, 2012 11:42 am
Forum: The Pickled Gnu (The Pub)
Topic: trainer question
Replies: 4
Views: 4319

Re: trainer question

Also as i am going over on Thursday to do this, is there anything i have to set up on the trainer switch to have it work? or will it automatically work on my transmitter as the master ?
by Malcurin
Thu Jul 05, 2012 11:37 am
Forum: The Pickled Gnu (The Pub)
Topic: Vacation in France
Replies: 13
Views: 8560

Re: Vacation in France

If you with to learn more about wine making in France, watch the Simpsons episode where Bart goes there as an exchange student and lands in a house that makes wine, that's how i learned :)
Wine Making in France :)
by Malcurin
Wed Jul 04, 2012 8:39 am
Forum: The Pickled Gnu (The Pub)
Topic: Vacation in France
Replies: 13
Views: 8560

Re: Vacation in France

Yes you must fly while eating frogs legs and snails and drinking lots of red wine, and say we we a lot also invest in a fake mustache ( if you don't already have one) that's OK In New Zealand atm you have to fly with giant hairy Hobbit like feet ....... Not fun
by Malcurin
Mon Jul 02, 2012 9:50 pm
Forum: The Pickled Gnu (The Pub)
Topic: Buddy codes for Hobbyking
Replies: 24
Views: 17840

Re: Buddy codes for Hobbyking

valid until 17th July Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack http://rcsearch.info/hobbyking/thumbnails/N2200-3S-25(1).jpg Normally $17.99 (buddy price Saving 43%, -$7.72) $10.27 FrSKY D6FR ACCST 6 Channel RX http://rcsearch.info/hobbyking/thumbnails/D6FR.jpg Normally $19.99 (buddy price Savin...
by Malcurin
Thu Jun 21, 2012 8:58 am
Forum: The Pickled Gnu (The Pub)
Topic: trainer question
Replies: 4
Views: 4319

Re: trainer question

sorry yes its er9x latest version, :) and sweet thanks for that information good to know
by Malcurin
Thu Jun 21, 2012 7:47 am
Forum: The Pickled Gnu (The Pub)
Topic: trainer question
Replies: 4
Views: 4319

trainer question

Can someone with a 9x mode 2 be a slave tx with a 9x mode 1 tx? I have a friend who fly's mode 2 heli's and want to give him a go on a plane but I'm Mode 1 and he is Mode 2
by Malcurin
Tue Jun 19, 2012 12:17 am
Forum: er9x
Topic: er9x and simulator
Replies: 76
Views: 48951

Re: er9x and simulator

Using Westy's awesome template i managed to get a 7th channel working ( only tested it in his plane sim atm will test in heli soon ) in the 7th channel just add 100% Half Rud :) looking for more, need that 8th channel , I suspect its going to be a pot though :) now the useable switches should be rud...
by Malcurin
Fri Jun 15, 2012 12:05 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: expo?
Replies: 1
Views: 2885

Re: expo?

i just had this issue myself, yes this is what it should look like
by Malcurin
Fri Jun 08, 2012 12:54 am
Forum: er9x
Topic: FMS error message - D3DRM.dll is not loaded
Replies: 1
Views: 10570

Re: FMS error message - D3DRM.dll is not loaded

this is just an Old Direct X file, FMS likes this to be able to open nothing serious, just go here http://www.dlldump.com/download-dll-fil ... nload.html download that and place it into your FMS install folder, and then it should work
by Malcurin
Wed Jun 06, 2012 7:57 pm
Forum: er9x
Topic: Student trainer mode
Replies: 67
Views: 39332

Re: Student trainer mode

by Malcurin
Wed Jun 06, 2012 3:33 am
Forum: eePe
Topic: Feature id Like to see
Replies: 4
Views: 4983

Feature id Like to see

I would like to see an eepe file that has unlimited Model spaces on it for computer use only that i can store my Modules / template files on so I can collect all these wonderful templates that people are posting and keep them in one file and not have to search through to find the one i had open days...
by Malcurin
Tue Jun 05, 2012 11:21 am
Forum: Where to buy / Spares / Modules? Selling up?
Topic: TGY9X soon to be available without RF module/RX
Replies: 35
Views: 21556

Re: TGY9X soon to be available without RF module/RX

Id still buy the full priced one, plus if anyone wants to send me there turnigy receivers, Ill gladly take them :)
by Malcurin
Mon Jun 04, 2012 11:57 am
Forum: er9x
Topic: Audio (voice) - Stock 9X PCB
Replies: 4092
Views: 1622474

Re: Audio (voice)

and all must be said by a very hot sounding female voice to make everyone at the clubs jealous of the transmitter :)
by Malcurin
Sun Jun 03, 2012 12:26 pm
Forum: Hardware
Topic: How do i set-up expo correctly?
Replies: 4
Views: 4615

Re: How do i set-up expo correctly?

awesome thanks, ill take a look at the graph on the spectrum ( if they have one) tomorrow and try and match it on my ( in my opinion better and more awesome) transmitter the guys I'm flying with at the club have never seen a 9x before me and seam impressed with it, especially how configurable it is ...
by Malcurin
Sun Jun 03, 2012 9:40 am
Forum: Hardware
Topic: How do i set-up expo correctly?
Replies: 4
Views: 4615

Re: How do i set-up expo correctly?

Thanks, Now or an answer on the Expo. lol Hope im doing it right :P

Go to advanced search