openrcforums

Hi Dears!
I only need to program one temperature sensor for my plane.
Does anybody already have the code to be added in the arduino?

Dears, Does anybody had already programed arduino to monitor temperature using D8RII telemetry port? Arduino is really necessary or would be possible to connect the sensor directly to the D8R analogue port? I have many D8R receivers and now I need to monitor the engines temperature. What is the easi...

Dears,

Does anybody have already used the Radiomaster Multiprotocol rx in Taranis X9D Plus?

I thinking about buying it, but first I would like to know if it has the same range of the original Frsky.

Dears,

Please, does anybody could tell me where the new voice file gets stored after generating it in opentx speaker?
I,ve looking for in my computer but I dont find it!
Windows 10

Dears,

Does anybody know if its possible to set sound file to anounce the model name everytime I turn the X9D Plus on?

Obs: I use this function in my 9XR Pro, but in tbe X9D Plus I didnt find this option.

Ops!!

Solved,
I'd downloaded the wrong Sdcard firmware.

The Sdcard firmware that starts with 128x64... doesnt have the folder "IMAGE"
The correct firmware is 212x64....

Please, does anybody could help me with this issue?

Thanks Kilrah

Dears,

What is the SDcar correct folder to add the model icons?

I've tried to add it in the screenshots and models folder, but in the model setup, when I select the model image, it informs "No bitmaps on SD"

The icons were downloaded from opentx with the extention bmp.

I've noticed in my radio it doesnt matter how is set the USB mode, it just communicate with companion with the radio in the bootloader mode.

So, how must be set the USB Mode to update radio firmware using companion?

Solved! I'd put the radio in the bootloader mode and so it communicated with companion and I updated the Kiradio firmware. However, I found in the radio setup an option "USB Mode" that I set as "Storage" and know the radio communicates without being in the bootloader mode. It was...

I did it, but it shows the message "Its not a valid file"

I'd copied the firmware "open TX 2.3.11" in the sdcard firmware directory.

The file is: opentx-x9d+-en.bin

Is there anything wrong?

The firmware installed is the 2.3.9

One more doubt.
I've tried to update the firmware by companion, however, when I select the write it, the message below is showed. Does anybody knows what could be?

"Could not check firmware from radio"

"Opening DFU Capable USB device... Can not open device"

Dears,

If I update the sdcard with the last version, is it possible to update the radio firmware throught the bootload function?

Which driver is necessary to Windows 10?
I'v tried to install the zadig-2.5 but it doesnt have the STM device to be selected

How do I know which one is the English version?

Dears,

I bought an used Taranis X9D Plus SE.

It looks to be working properly, however, I'd noticed the screens are mixing english with portuguese language.

Does anybody know how could I solve this problem?

Althought I'm Braziliam, I prefer english language.

The firmware version is: 2.3.9-otx

Dears,

Where do I find the manual explaining the functions of the firmware 2.3.1 for Taranis?

The seller told me he updated the radio firmware making download of it in the Sdcard, so after that, the voices stopped working

Thanks Kilrah

After downloading the Sd file is just to copy it in the Sdcard? Or its necessary any other procedure?

Follow the firmeware installed.

Follow the firmeware installed

First, how do I add a picture in this text?

It has to have a SD card with the proper contents. Each release of firmware has different version numbers of the contents of the SD, There are some SD cards that are fake that have been reported in some units. These are generally 1 mb cards. So ask seller if the unit has an SD, the size of the card...

Just one more question.
If it doesnt have the Sd installed, or its 1mb fake, is it possible to download the files and install a new one?

Ok. I will check. Thanks

Dears,

I wanna buy an used radio, however, in the video the seller sent me, when he turns the radio on, the radio doesnt speak as it uses.

Please, does anybody could tell me if it has any set up to make the initial voice return?

How do I center it mechanically? ?? Just put the stick in the middle of the travel... https://i.imgur.com/TqrCE7i.jpg but the channels monitor in the screen shows the proper movement. Then everything is good on the radio and it's the ESC. Maybe you need to reduce throws to 80% on the radio and reca...

How do I center it mechanically?