Search found 35 matches

by tolisn
Fri Aug 14, 2020 8:43 pm
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: Is there anyway to show flight modes on the main screen ?

Hi Mike, Sorry for the late reply.
I do have telemetry via a 3dr telemetry setup. Its a usb over the air setup that does not go through the radio. It is only show in the mission planner software. That shows also the flight mode but I was hoping to not require the laptop for normal fun flying.
by tolisn
Sun Jul 19, 2020 1:19 pm
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: Is there anyway to show flight modes on the main screen ?

Thanks Mike, its working great. If only we could have all six flight mode it would be perfect !! Oh well, can't have it all.
by tolisn
Sun Jul 19, 2020 10:47 am
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: Is there anyway to show flight modes on the main screen ?

We can only have 4, named modes. Try: L1 v>val CH5 1230 L2 v<val CH5 1360 AND L1 then use L2 to enable flight mode 1 and set the name to "Loiter" Repeat with more pairs of logical switches for the other 3 modes you may name. Mike I tried setting the logic switch values but they only go to...
by tolisn
Sat Jul 18, 2020 4:22 pm
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: RE: Re: Is there anyway to show flight modes on the main screen ?

You will need to create some logical switches that are based on the channel 5 output, so one is on for each flight mode. Then set up the flight modes so each is enabled by the appropriate logical switch. What is your channel 5 output for each of your flight modes? Mike Channel5 output is as follows...
by tolisn
Sat Jul 18, 2020 11:32 am
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: Is there anyway to show flight modes on the main screen ?

one more question. In my setup using ardupilot I have set channel 5 of the receiver to control the flight mode of the ardupilot. Channel 5 is controlled using a 6 position rotary switch on the radio. How can I make this 6 position rotary switch also change the flight mode txt on the main screen on m...
by tolisn
Thu Jul 16, 2020 8:50 pm
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: Is there anyway to show flight modes on the main screen ?

Wow, thanks. Keeping finger crossed.
Is there hope to get full 6 flight modes displayed ? I have a rotary switch the has 6 positions to set flight mode on my arducopter based drone.
by tolisn
Thu Jul 16, 2020 6:20 pm
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Re: Is there anyway to show flight modes on the main screen ?

Thanks for the reply Mike. Unfortunately I have the mega64 unit.
by tolisn
Mon Jul 13, 2020 2:55 pm
Forum: er9x
Topic: Is there anyway to show flight modes on the main screen ?
Replies: 16
Views: 7842

Is there anyway to show flight modes on the main screen ?

Hi
I have setup my Turnigy 9X to have a six position flight mode switch. Is there any way to show the current flight mode (ex. loiter, guided.e.t.c.) selected on the main screen of a ER9x flashed unit ?
by tolisn
Thu Oct 11, 2018 3:59 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Thanks a million Mike.
So I just burn the bootloader and then the firmware as per the instructions in beginning of the thread and I'm all set ?
After burning the firmware will the unit start talking by itself or do I have to invoke it somehow ?
by tolisn
Wed Oct 10, 2018 4:59 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

How can I load it into the arduino IDE since the IDE only loads files with .ino or .pde extensions?

I tried renaming amod328.c to amod328.ino. It loads into the IDE but I get a lot of compile errors.
by tolisn
Wed Oct 10, 2018 4:45 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi Mike, thanks for chiming in. I'm aware of how to flash an arduino using the arduino IDE. If it is that simple then my problem is solved. Thanks a million.
by tolisn
Wed Oct 10, 2018 3:39 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Yes, that is the post that I'm referring too. Can someone compile it for me as a test version ?
by tolisn
Wed Oct 10, 2018 9:19 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Well, my PCB is not finished yet but I assume that I will be following the Instructions mentioned in the beginning of the thread. Mike has posted ( page 3 of this thread) a source code of arduvoice that you can use to test arduvoice but you need to enable the test feature and then compile it the get...
by tolisn
Wed Oct 10, 2018 4:09 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I found elsewhere in this thread a version with a test option that mike posted so you can test arduvoice without needing to connect to the radio. The version needs compiling with the test option enabled. Can anyone help out on this and compile it for me? I have no idea how to do it. here is the link...
by tolisn
Tue Oct 09, 2018 7:22 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

As I mentioned in my previous post, I will be making a pcb that has all the parts included. The SD card will be connected to the arduino via a logic level converter. When I want to program the arduino I can disable the sd card circuit. Why will I not be able to connect to Eepe for model upload/downl...
by tolisn
Sat Oct 06, 2018 3:46 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Is the SD card removed from arduvoice board in order to write new models and voice files or is it written using the arduvoice board?
by tolisn
Thu Oct 04, 2018 5:48 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Thanks for the info. I do have a 2GB microSD at hand so I should be good. I'm going for an all included PCB. I hope it turns out OK.
by tolisn
Mon Oct 01, 2018 2:55 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Yes,I do intend to add MOSFET based level shifters. Thanks for the reply.
by tolisn
Mon Oct 01, 2018 6:23 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

while designing a pcb I decided to include the SD card holder on it and not use a separate sd card module.

Will this work with micro SD cards and what size card is required ?
by tolisn
Fri Sep 28, 2018 4:27 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi
Is Arduvoice based on an arduino with a mega164 or a mega328 chip ?
I'm trying to make a pcb and I'm sourcing the required parts.

And one more question. Is the bootloader a common arduino optiboot bootloader or something specially designed for arduvoice ?
by tolisn
Wed Sep 12, 2018 8:20 pm
Forum: Electronic Mods
Topic: Turnigy 9X 9Ch / 16 channels?
Replies: 15
Views: 17464

Re: Turnigy 9X 9Ch / 16 channels?

Thanks Mike.
by tolisn
Mon Sep 10, 2018 9:14 am
Forum: Electronic Mods
Topic: Turnigy 9X 9Ch / 16 channels?
Replies: 15
Views: 17464

Re: Turnigy 9X 9Ch / 16 channels?

So considering the fact that my radio uses er9x firmare it is doable with 2 RF units. How would I go about connecting them? Is there a how to somewhere?
by tolisn
Sun Sep 09, 2018 11:09 am
Forum: Electronic Mods
Topic: Turnigy 9X 9Ch / 16 channels?
Replies: 15
Views: 17464

Re: Turnigy 9X 9Ch / 16 channels?

Hi guys. I have replaced the original RF unit with a djt module and a new compatible receiver on my 9X radio. This gives me 8 channels. Is there anyway the I can use the original RF module and the stock receiver so I can add a few more channels to my 9x radio?
by tolisn
Sat Sep 08, 2018 10:29 am
Forum: General Information & Rules
Topic: Wiki Changes
Replies: 5
Views: 14047

Re: Wiki Changes

Hi
What happened to the wiki, I can't see it.
I get an error message when trying to enter.
by tolisn
Thu Jul 26, 2018 6:08 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

In order to test arduvoice without connecting it to the radio I was thinking of hooking it up to an arduino and sending it commands so it can speak. Is there somewhere that I can find the commands required to be sent over the serial bus that will make the unit talk?
by tolisn
Wed Jul 25, 2018 5:39 am
Forum: er9x
Topic: Feature list for m64 version
Replies: 3
Views: 4080

Re: Feature list for m64 version

Yes, but are they not less feature for the m64 version compared to the m128 version?
by tolisn
Wed Jul 25, 2018 4:50 am
Forum: er9x
Topic: Feature list for m64 version
Replies: 3
Views: 4080

Feature list for m64 version

Hi
Is there a feature list that I can find for the m64 version of er9x?
by tolisn
Mon Jul 23, 2018 8:02 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Thanks for all the help. I will be making a pcb to support the boards. I'm hoping to fit it in the space between the gimbals.
by tolisn
Mon Jul 23, 2018 7:35 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

One more maybe silly question. I was reading on how to burn the firmware into the module and it says that the two horizontal trims should be held towards the centre. Are these the small buttons under the gimbals that are used to trim the gimbals during flight ?
by tolisn
Mon Jul 23, 2018 7:09 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 598
Views: 319726

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

What about testing the unit before installing it, can it be done ?

Go to advanced search