Search found 583 matches

by Crucial
Mon Jan 21, 2013 7:29 pm
Forum: Hardware
Topic: Help with multiwii quadcopter
Replies: 89
Views: 15770

Re: Help with multiwii quadcopter

I had to increase the yaw rate too. Mine was very slow responding before that.
by Crucial
Tue Jan 15, 2013 6:36 pm
Forum: RF MODULES
Topic: Help Me
Replies: 2
Views: 670

Re: Help Me

Do you have pics of the damage? English is obviously not your first language so the description is not coming across very well.
by Crucial
Sun Jan 13, 2013 3:47 pm
Forum: PROGRAMMERS
Topic: Getting rid of the Hobby King usbasp SCK error
Replies: 72
Views: 33282

Re: Getting rid of the Hobby King usbasp SCK error

Flaps, what OS do you use on your computer? The ad for your programmer says it doesn't work with win7. I wonder if that is actually true?
by Crucial
Fri Jan 11, 2013 2:40 am
Forum: er9x
Topic: er9x and mode2
Replies: 13
Views: 1465

Re: er9x and mode2

Also, the default setting you are changing in eepe is only for creating new models in eepe. It will set the channels in that order by default. That doesn't mean you have to keep them in that order. This is the beauty of er9x. You can change the order of the channels in the mixer to whatever you want...
by Crucial
Fri Jan 11, 2013 2:38 am
Forum: er9x
Topic: er9x and mode2
Replies: 13
Views: 1465

Re: er9x and mode2

If you are flying bnf helis then you have to set the channel order in the mixer to match their output which should be TAER. spektrum stuff uses TAER channel order. If something has a receiver with sockets you can move the servo connections to the AETR order if you like but as a general rule all the ...
by Crucial
Thu Jan 10, 2013 9:54 pm
Forum: er9x
Topic: er9x and mode2
Replies: 13
Views: 1465

Re: er9x and mode2

Look in the mixer menu of your model setings(hold right button to get to model settings). You can set the channels there to whatever input you want. CH1 as THR, CH2 as AIL, CH3 as ELE and CH4 as RUD. Also, in the radio settings(press left button long) page 1 you can look all the way at the bottom an...
by Crucial
Thu Jan 10, 2013 9:50 pm
Forum: er9x
Topic: er9x and mode2
Replies: 13
Views: 1465

Re: er9x and mode2

You can backup the stock firmware and eeprom with eepe or companion9x before changing to one of the other firmwares. There are copies of it floating around as well.
by Crucial
Thu Jan 10, 2013 5:17 pm
Forum: Turnigy 9XR radio
Topic: 9XR Programming
Replies: 5
Views: 1350

Re: 9XR Programming

the forum wasn't parsing the mobile youtube link properly so I changed it to the desktop site url. should be working now.
by Crucial
Mon Jan 07, 2013 11:09 pm
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

ok, ill stop posting there
by Crucial
Mon Jan 07, 2013 5:36 pm
Forum: er9x
Topic: Headtracker not working
Replies: 24
Views: 3770

Re: Headtracker not working

I also answered this in the 9xrforums thread. I think the problem in my testing is that I was using a cable that has a futaba plug on one end and a JR on the other. This is why input and output works in my testing. If I were to use a futaba <-> futaba cable it would be the same as you describe. I wo...
by Crucial
Mon Jan 07, 2013 8:55 am
Forum: Turnigy 9XR radio
Topic: 9XR for sale
Replies: 5
Views: 1444

9XR for sale

Edit: sold!

Anyone want to buy a new 9XR? Slightly sticky exit button is the only flaw.
by Crucial
Mon Jan 07, 2013 8:41 am
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

Oh my, I think I may have found another problem. I posted this on the 9xr forum in response to Elmardus' problem. Can anyone else with a 9xr test the PPMSIM setting and verify that their radio does NOT output a PPM signal over either trainer port with the radio turned on by the main power switch and...
by Crucial
Mon Jan 07, 2013 12:25 am
Forum: er9x
Topic: Headtracker not working
Replies: 24
Views: 3770

Re: Headtracker not working

Interesting. On my 9xr both trainer ports output a signal just fine to my 9x.
by Crucial
Sun Jan 06, 2013 8:10 pm
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

Another thing I don't like is the feel of the throttle stick. It isn't smooth feeling at all. I tried adjusting the metal pressure strip and added some silicone grease but it is still rather terrible feeling. Part of the problem is that the stick is looser feeling toward the bottom part of the trave...
by Crucial
Sun Jan 06, 2013 4:35 am
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

I will say that the radio does look much harder to mod. The case is very limited in space.

I also do not like the new buttons at all. I think overall the 9x is still a much better radio.
by Crucial
Sun Jan 06, 2013 1:16 am
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

I completely forgot to snap pics of the pot I had out and now it is back together. Sorry guys.
by Crucial
Sun Jan 06, 2013 1:15 am
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

I cut off my 6 pin avr plug when I soldered in my programmer wires. I don't think I have another one anywhere. :(
by Crucial
Sat Jan 05, 2013 11:49 pm
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

They wont fit the 9x because they attach differently. The screws are attached from the inside of the radio through the holes in the gimbal and thread into the front case.
by Crucial
Sat Jan 05, 2013 10:27 pm
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

Some pics of the gimbal assembly. The change over from mode 1 to mode 2 is not as simple as it used to be. The pin holding the cam lever is pressed in and the lever can't be easily removed. I think it would be easier to swap the gimbals from side to side but you would have to swap the wires from one...
by Crucial
Sat Jan 05, 2013 3:43 pm
Forum: Hardware
Topic: Help with multiwii quadcopter
Replies: 89
Views: 15770

Re: Help with multiwii quadcopter

I noticed you mentioned earlier about not understanding the check boxes and how to set them. Did you ever figure out how they work? Did you mean how to arm each aux channel and make it high medium low?
by Crucial
Sat Jan 05, 2013 6:11 am
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

Damn, the postman decided he didn't want to wait for someone to answer the door. There were 2 people in the house when he knocked and ran. I'll have to pick it up tomorrow I guess.
by Crucial
Fri Jan 04, 2013 7:28 pm
Forum: Turnigy 9XR radio
Topic: Turnigy 9XR General
Replies: 471
Views: 57527

Re: Turnigy 9XR General

My slow boat shipping 9xr just arrived in my home town. Should hopefully have it by tomorrow.
by Crucial
Fri Jan 04, 2013 6:19 am
Forum: Hardware
Topic: iPhone Turnigy 9x
Replies: 7
Views: 955

Re: iPhone Turnigy 9x

I tried getting the iPhly to work as a slave to a 9x master but couldn't get it to work. I assumed like you said Kilrah that it had something to do with the levels being wrong for the 9x
by Crucial
Thu Jan 03, 2013 3:59 pm
Forum: Hardware Mods
Topic: Wooden sticks for winter flying
Replies: 7
Views: 845

Re: Wooden sticks for winter flying

Just thinking, Maybe silicone fuel tubing? I guess you would have to use a long screw into the stick and then tubing over that? Maybe the larger tubing would actually stretch enough to fit the stock stick? Unscrew the stick and push the tubing on from the small shaft end towards the larger end with...
by Crucial
Thu Jan 03, 2013 2:55 pm
Forum: ersky9x
Topic: ERSKY9x Questions
Replies: 1760
Views: 138945

Re: ERSKY9x Questions

I think part of the frustration that lead to the initial statement about stopping er9x development in favor of ersky is that those who have the sky board are anxious to see what can be done with the more powerful board. There is so much more potential with that board but it is being held back by han...
by Crucial
Thu Jan 03, 2013 12:58 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: Need to fix Blank Screen on Turnigy 9X Transmitter
Replies: 21
Views: 7479

Re: Need to fix Blank Screen on Turnigy 9X Transmitter

Showmaster I'm sorry you got burned by selfish losers. It really is true when they say no good deed goes unpunished.
by Crucial
Tue Jan 01, 2013 10:03 pm
Forum: ersky9x
Topic: ERSKY9x Questions
Replies: 1760
Views: 138945

Re: ERSKY9x Questions

Edit: Nevermind. I pulled the card and formatted it with windows, then inserted it back in the radio and tried again. This time mass storage worked and I was able to copy my voice files back to the card while in the radio. I had some time to update my ersky board today and I am having trouble gettin...
by Crucial
Sat Dec 29, 2012 5:33 am
Forum: er9x
Topic: EEPROM ERROR after trying to flash
Replies: 16
Views: 1288

Re: EEPROM ERROR after trying to flash

Did you turn the radio on when flashing?
by Crucial
Thu Dec 27, 2012 10:23 pm
Forum: RF MODULES
Topic: Module and antenna question with new Turnigy 9XR
Replies: 73
Views: 13060

Re: Module and antenna question with new Turnigy 9XR

What other radio system uses a different antenna than this? You don't have to cut it off if you don't use it. It's internal to the radio and doesn't get in the way of anything if you use a turnigy, frsky or any other module. The planned use for this antenna is to be used with the coming hobby king d...

Go to advanced search