Search found 529 matches

by OctavioS
Fri Jul 14, 2017 12:02 pm
Forum: Other Radios
Topic: Is X10 a new Frsky radio?
Replies: 12
Views: 2550

Re: Is X10 a new Frsky radio?

It looks like optimus prime with an antenna
by OctavioS
Fri Jul 14, 2017 10:39 am
Forum: Other Radios
Topic: Is X10 a new Frsky radio?
Replies: 12
Views: 2550

Re: Is X10 a new Frsky radio?

@Helle
Just like the spektrum dx series, they are alike, a mixture or bifurcation of themselves, far more expensive and less features. Why not buy frsky?
by OctavioS
Wed Jun 28, 2017 1:13 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR pro module choices
Replies: 14
Views: 804

Re: 9XR pro module choices

Kilrah wrote:
Tue Jun 27, 2017 6:45 am
OctavioS wrote:
Tue Jun 27, 2017 1:04 am
Version 2 of that module will be released soon, so they say in the module description.
That's BS - They copy/pasted the description of the AVR module, that note was valid about a year ago...
Really, so this supposed version 2 was for the AVR module?
by OctavioS
Tue Jun 27, 2017 1:04 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR pro module choices
Replies: 14
Views: 804

Re: 9XR pro module choices

Right I ordered one of those modules. I was looking at banggood and saw something like this module. https://www.banggood.com/2_4G-CC2500-A7105-Flysky-Frsky-Devo-DSM2-Multiprotocol-TX-Module-With-Antenna-p-1048377.html In the text there is a paragraph about range: Tested Ground Control Distance: CC2...
by OctavioS
Tue Jun 27, 2017 1:02 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR pro module choices
Replies: 14
Views: 804

Re: 9XR pro module choices

I would buy the frsky version.. I am waiting for mine to arrive. They didn't have the frsky version when I bought it, so I got the JR version. I will have to flash it to the Frsky channel order. I think that might be the only difference, but not sure. I believe the USB connector is for flashing it....
by OctavioS
Mon Jun 19, 2017 12:41 pm
Forum: openTx
Topic: Throttle warning on different switch
Replies: 3
Views: 499

Re: Throttle warning on different switch

You will have to make copy and rename the throttle warning audio file to the a proper folder, which i think its \sounds\en and configure the warning to that switch.
by OctavioS
Sun Jun 18, 2017 11:33 pm
Forum: Software
Topic: Conecting radio for Phoenix 5.5.
Replies: 9
Views: 795

Re: Conecting radio for Phoenix 5.5.

that sim works fine without any cracks or patches, even if its captain hook's copy.
by OctavioS
Sun Jun 18, 2017 11:31 pm
Forum: Software
Topic: Conecting radio for Phoenix 5.5.
Replies: 9
Views: 795

Re: Conecting radio for Phoenix 5.5.

Pirate, hey...arrrrrrg..:) :) :P
by OctavioS
Fri Jun 16, 2017 11:13 pm
Forum: Turnigy 9XR radio
Topic: swashmix????
Replies: 8
Views: 713

Re: swashmix????

Hi, check this out.
It might give you a hand.
As an advice, first level mechanically you heli (i think you know that) and then adjust on the radio.
Please note that this is for flybar heli.
Check if channels correspond.
by OctavioS
Fri Jun 16, 2017 2:43 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 429
Views: 35129

Re: Orange Module running MULTI protocol

[SOLVED]Lucky as i am, the arduino ide now shows an error during the compilation: Arduino: 1.6.12 (Windows 10), Placa:"Multi 4-in-1, ATmega328 (3.3V, 16 MHz)" C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Use...
by OctavioS
Fri Jun 16, 2017 1:42 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 429
Views: 35129

Re: Orange Module running MULTI protocol

[SOLVED]Hi, i know that this is not the proper thread, entirely, but i have the banggood multiprotocol module and i followed the flash instructions as shown in here, but arduino ide doesnt show the new added board "multi 4 in 1". I have ide 1.8.3 running on windows 10 x64.
thx.
by OctavioS
Sat Jun 10, 2017 8:54 pm
Forum: FrSky Taranis radio
Topic: Aloft Taranis Support is Awful!
Replies: 13
Views: 1211

Re: Aloft Taranis Support is Awful!

I had a problem with a 6 position switch that i purchased from them. They promptly sent me another upon contact. Absolutely nothing to complain.
by OctavioS
Wed May 24, 2017 8:06 pm
Forum: The Pickled Gnu (The Pub)
Topic: Turnigy 9x Battery Cover.
Replies: 8
Views: 739

Re: Turnigy 9x Battery Cover.

De nada. (you are welcome in Portuguese) :D :D
by OctavioS
Wed May 24, 2017 7:08 pm
Forum: The Pickled Gnu (The Pub)
Topic: Turnigy 9x Battery Cover.
Replies: 8
Views: 739

Re: Turnigy 9x Battery Cover.

Well, mine fits perfectly, i just placed it in on the 9X.
by OctavioS
Sun May 21, 2017 11:58 am
Forum: Hardware
Topic: having issues with USBASP driver
Replies: 55
Views: 2530

Re: having issues with USBASP driver

Don't know what to hell is all the fuss about. I have several Win10 systems (pro, 64) here and no problems with usbasp. Drivers installed via Zadig. Only downside I found is this: Arduino IDE (1.6.10) (with avrdude 6.3) only works with WinUSB drivers provided e.g. by Zadig (2.2). But avrdude 5.1 pr...
by OctavioS
Wed May 17, 2017 10:15 pm
Forum: Hardware
Topic: 9X (and possibly 9XR/PRO) Switch Board Design
Replies: 70
Views: 4637

Re: 9X (and possibly 9XR/PRO) Switch Board Design

I use such a switch with the AR9x board for quite some time already, and it works great! http://www.rccube.ru/image/cache/catalog/products/new_switch_1.4_02-500x500.jpg I didn't try it with a 9Xtreme though. Let me check if I still have my Eagle files for this project (it may take me a couple of da...
by OctavioS
Mon Mar 13, 2017 7:51 pm
Forum: Reviews
Topic: Review: FRSKY S8R Receiver
Replies: 5
Views: 1733

Re: Review: FRSKY S8R Receiver

hmm, ok. thx.
by OctavioS
Fri Mar 10, 2017 4:14 pm
Forum: Reviews
Topic: Review: FRSKY S8R Receiver
Replies: 5
Views: 1733

Re: Review: FRSKY S8R Receiver

I wonder if this receiver is suitable for helicopter, since it has 3 axis gyro stabilization?
by OctavioS
Wed Jan 11, 2017 9:32 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme and Multiprotocol Module With STM chip
Replies: 9
Views: 1033

Re: 9Xtreme and Multiprotocol Module With STM chip

Mike, I am looking at building a Multiprotocol with a STM32 chip. The module uses a "SN74LVC2G00DCTR DUAL INPUT POSITIVE-NAND GATE". I have been told that this chip is needed because of the Taranis radio. I am planning to install this module as internal in my 9XT radio, and use COM2 for the telemet...
by OctavioS
Sun Jan 08, 2017 2:17 am
Forum: FrSky Taranis radio
Topic: Taranis Q X7
Replies: 0
Views: 896

Taranis Q X7

Sem Título.png
Taranis Q X7 in a weird promotion at Banggood, or so to say, Bang God.
by OctavioS
Wed Jan 04, 2017 9:24 pm
Forum: FrSky Taranis radio
Topic: Magnetic gimbals for x9d & x9dp
Replies: 12
Views: 1525

Re: Magnetic gimbals for x9d & x9dp

Yes they are, but we are talking about the Taranis Gimbals, not the 9XR-PRO, That's another story. The beta testers of the 9XR-PRO (I was one of them) suggested Hobbyking at the time to use better gimbals on the radio. Well, as we all know they didn't follow the suggestion unfortunately. That radio...
by OctavioS
Wed Jan 04, 2017 9:13 pm
Forum: FrSky Taranis radio
Topic: Magnetic gimbals for x9d & x9dp
Replies: 12
Views: 1525

Re: Magnetic gimbals for x9d & x9dp

Probably, altough makes no sense. Haters will always be haters for sure.
Frsky has this good answer! And i 100% agree.
Image
by OctavioS
Wed Jan 04, 2017 12:18 pm
Forum: FrSky Taranis radio
Topic: Magnetic gimbals for x9d & x9dp
Replies: 12
Views: 1525

Re: Magnetic gimbals for x9d & x9dp

jhsa wrote:The actual Taranis Gimbals are not crappy at all :o...João
I see a lot of people compaining about them, myself i have nothing to say.
by OctavioS
Wed Jan 04, 2017 11:22 am
Forum: FrSky Taranis radio
Topic: Magnetic gimbals for x9d & x9dp
Replies: 12
Views: 1525

Re: Magnetic gimbals for x9d & x9dp

Thats why its getting better. Now at least the taranis will get an excellent upgrade and everybody will stop complaining about how crappy are the actual gimbals. Let see about the price.
by OctavioS
Wed Jan 04, 2017 10:22 am
Forum: FrSky Taranis radio
Topic: Magnetic gimbals for x9d & x9dp
Replies: 12
Views: 1525

Magnetic gimbals for x9d & x9dp

i have got confirmation from Frsky that taranis and taranis plus will get a magnetic gimball upgrade soon. it just keeps getting better.
by OctavioS
Fri Dec 30, 2016 12:05 am
Forum: FrSky Taranis radio
Topic: XJT New update. - update or not?
Replies: 2
Views: 610

Re: XJT New update. - update or not?

Humm, i didnt thought about the hardware. :D
by OctavioS
Thu Dec 29, 2016 2:14 am
Forum: FrSky Taranis radio
Topic: XJT New update. - update or not?
Replies: 2
Views: 610

XJT New update. - update or not?

Hi all, on Christmas day Frsky released an update for the XJT module and they said: "FrSky has improved the performance of the BK-RF board of Taranis X9D Plus since Nov. 15th, 2016. For those with production dates between Nov. 15th, 2016 to Dec. 23rd, 2016, if you’d like to use with LR12 mode (L9R r...
by OctavioS
Fri Dec 09, 2016 7:23 pm
Forum: er9x
Topic: Stock/er9x Rotary Encoder
Replies: 160
Views: 19799

Re: Stock/er9x Rotary Encoder

I have got this board from Andrewju, a Russian member from this forum.
I will have to speak to João to help me out with this switch thing.
by OctavioS
Fri Dec 09, 2016 5:16 pm
Forum: er9x
Topic: Stock/er9x Rotary Encoder
Replies: 160
Views: 19799

Re: Stock/er9x Rotary Encoder

The board i have is different from the one above.
IMG_20161209_093238.jpg
So you say that in this disposition, i remove the rotary wires and resolder gnd and switch to the layout you said and do the measuring.
right?

Go to advanced search