openrcforums

ahh haha
will do later thanks mate

Hey I'm still having difficulty theres some debugging I need to do, I have an ail and throttle switch error. I have r90 813 installed to my knowledge. Whats next and excuse me if I do not respond I'm working today.

Sweet except now I have new problem, I am very close to having revision 90 except it keeps showing up on windows 8 as a 65kb file and it should be a 10.5kb file.??? Its also not displaying telemetry still. Mike do you have paypal cuz your really helpful and I feel like I owe you tbh.

Ahh, I'm currently using eepe is there a better one or a method I can use? I always get the error that it autodetected the wrong board.

Can the stock telemetrez receive telemetry data from the xjt or does it need to be updated first.
Also what is the best way to program the telemetrez board, eepe is giving me trouble.

Trying to diagnose why XJT and X8R will communicate but not display telemetry data

I returned it, just a bad egg from ebay thanks

I also have the frsky version thanks mike

is there any protocol like ppm8 or ppm 16 that could make a difference?

I have found mulitple places telling me to bind different ways for this setup and was wondering if anyone else could help me. I have tried switching the switches on the back using a bind plug, not using one and i Cannot get it to bind.
Thanks.

@MikeB Yes, that will work, although if you want the backlight to be controlled be the firmware you will still need to do some extra wiring. You might consider the total cost of the 9X +SP board + TEZ board + Backlight, and compare it to the cost of the Turnigy 9XR-PRO. This has all the functions of...

Mike- could you link me to the wiring required for the backlight? bob195558-I am not a fan of that button system for er9x it looks difficult haha, With my setup the only thing Ill be lacking is some memory for models and i dont have that many anyway. If its going to have the chrome look it better be...

Sorry if I made the post a little vague however I already have a Turnigy 9x and over the past week I have ordered XJT Module, Backlight kit, and all that other stuff up top, I am familiar with flashing the 9x and the TEZ board. I guess I chose the 9x because I wanted cheap fun that I could use out o...

Hey this might be off topic but with regards to flashing the TelemetrEZ board I was getting the error libusb0.dll Missing and many errors after that, I was able to fix it by installing WINAVR from http://www.ladyada.net/learn/avr/avrdude.html i was really happy with it.

So is the XJT install the exact same as the DJT install? just throw it in there with a smartieparts board and latest er9x and go?

*I have looked through the forums for a similar post and did not find one if there is, redirect me please. Thanks* Turnigy 9x Smartieparts Board er9x Telemetrez Board FrSky XJT+that fancy smart receiver it comes with. Hobbyking Backlight Kit Any suggested order/Suggested products to go with the comb...