Search found 175 matches

by lancaster
Sun Dec 03, 2017 9:37 pm
Forum: ersky9x model setup
Topic: RSSI - send value to FC OSD via SBUS
Replies: 3
Views: 123

Re: RSSI - send value to FC OSD via SBUS

Hi Mike
Amazingly rapid response - whats more its positive - ErSky9x provides the answer again
Great work Mike
I'll follow your instructions
Many many thanks
Hans
by lancaster
Sun Dec 03, 2017 8:16 pm
Forum: ersky9x model setup
Topic: RSSI - send value to FC OSD via SBUS
Replies: 3
Views: 123

RSSI - send value to FC OSD via SBUS

Hi Guys I have been following the youtube video (https://www.youtube.com/watch?v=nZxMvTCN_pI) showing how this can be done with Open TX ie send the RSSI value back to TX via telemetry return it to the RX via 2.4Ghz then through to the FC and OSD via SBUS Open TX provides an inputs page to source RSS...
by lancaster
Tue Oct 24, 2017 9:19 am
Forum: eepSKYe
Topic: eePeSKY safety switch question
Replies: 2
Views: 193

Re: eePeSKY safety switch question

Thanks for the explanation Mike - that makes sense now

Anyhow its all working well for me on the 9Xtreme

Thanks for all your hard work
regards
Hans
by lancaster
Mon Oct 23, 2017 11:52 am
Forum: eepSKYe
Topic: eePeSKY safety switch question
Replies: 2
Views: 193

eePeSKY safety switch question

Hi Mike/Joao Hope you are well Another couple of quick questions:- I'm using eePeSKY R421 Nov 21 2016, and when looking at the safety switch inputs I have noticed a new pop up box in the right hand column When I select sticky X in the second box there is a pop up giving Thr or P1,2,3 options - how d...
by lancaster
Thu Sep 28, 2017 3:21 pm
Forum: ersky9x model setup
Topic: What is OP7?
Replies: 3
Views: 240

Re: What is OP7?

HI Joao Thanks for the super quick response and great explanation - I should have read the manual a little more carefully! It makes sense now and I will give it some thought and practise I'm still having a great time with the 9Xtreme and I'm glad to see you are still always present on the forum Than...
by lancaster
Thu Sep 28, 2017 2:37 pm
Forum: ersky9x model setup
Topic: What is OP7?
Replies: 3
Views: 240

What is OP7?

Hi Mike/Joa Hope you are well - I have a quick question I'm using the Extreme Board on the Turnigy 9X with ersky9x-r218, v 3531-Mike I am using an old model mix for elevator /throttle trim - relevant lines shown as follows:- CH2 source Ele wt 100 source CH7 wt 50 switch ID- CH3 source Thr wt 100 CH7...
by lancaster
Thu Sep 28, 2017 1:08 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: How can I mix a percentage of down elevator when throttle is is increased?
Replies: 1
Views: 2424

Re: How can I mix a percentage of down elevator when throttle is is increased?

This is my setup

CH2 source Ele wt 100
source OP7 wt 50 switch ID-
CH3 source Thr wt 100
CH7 source Thr wt 100 offset 100
source P3 wt -100 multiply

ID switches on elevator trim and throttle linkage
P3 varies the amount of down trim that is applied by throttle
by lancaster
Tue Mar 07, 2017 10:57 am
Forum: General Information & Rules
Topic: Issue login
Replies: 13
Views: 2210

Re: Issue login

Had an issue with login into the forum. Message was "Catchable fatal error: Argument 1 passed to phpbb\notification\type\base::__construct() must implement interface phpbb\db\driver\driver_interface, instance of phpbb\user_loader given, called in /var/www/html/openrcforums.com/forum/cache/productio...
by lancaster
Wed Jan 18, 2017 3:48 pm
Forum: 9Xtreme upgrade board
Topic: New Frsky Hall Effect Gimbals
Replies: 15
Views: 3174

Re: New Frsky Hall Effect Gimbals

bob195558 wrote:Hi lancaster,

Can you link to where these New FrSky Hall Effect Gimbals are (can be found) ?

Bob B.
Hi Bob

The gimbals are also shown on the Banggood site

https://goo.gl/hCkeFg
Hans
by lancaster
Wed Jan 18, 2017 12:03 pm
Forum: 9Xtreme upgrade board
Topic: New Frsky Hall Effect Gimbals
Replies: 15
Views: 3174

New Frsky Hall Effect Gimbals

Hi Guys

Can these gimbals be fitted to the T9X Extreme?

regards
Hans
by lancaster
Wed Nov 02, 2016 11:13 pm
Forum: FrSky Taranis radio
Topic: Taranis - plus will not bind (EU LBT)
Replies: 9
Views: 2043

Re: Taranis - plus will not bind (EU LBT)

Have you tried flashing the both the TX and RX with International firmware
by lancaster
Tue Nov 01, 2016 9:35 pm
Forum: 9Xtreme upgrade board
Topic: PPM protection resistor
Replies: 30
Views: 6190

Re: PPM protection resistor

Hi Joao

I installed the resistor as shown on Mike photo

I thought it was pin 5 but now I see its pin 1

I will test for servo control as you say

thanks
Hans
by lancaster
Tue Nov 01, 2016 8:17 pm
Forum: 9Xtreme upgrade board
Topic: PPM protection resistor
Replies: 30
Views: 6190

Re: PPM protection resistor

Hi Guys

I have installed the 100 ohm resistor on both my 9Xtreme TXs and everything appears to be working ok.

Am I correct in thinking that because the resistor is in line to module pin no 5, good values for the RSS1 and SWR value indicate that all is working as it should ?

regards
Hans
by lancaster
Fri Oct 28, 2016 6:20 pm
Forum: 9Xtreme upgrade board
Topic: PPM protection resistor
Replies: 30
Views: 6190

Re: PPM protection resistor

Hi Joao
Hope you are well

Thanks for the super quick reply

I will do the PPM mod to be safe on both my T9XExtremes ( I recently bought a second Extreme board as the numbers are going down below 100!)

regards
Hans
by lancaster
Fri Oct 28, 2016 5:58 pm
Forum: 9Xtreme upgrade board
Topic: PPM protection resistor
Replies: 30
Views: 6190

Re: PPM protection resistor

Hi Guys Some weeks ago I updated my firmware to EU LBT versions on the XJT module and my XR receivers with no problems (SP Extreme board installed in T9X) The RX update requires leads to be connected between the SPort on the RX and the module pins numbers 3,4 and 5 in the TX. But thinking back on th...
by lancaster
Sun Oct 09, 2016 9:14 am
Forum: ersky9xr
Topic: HOW TO SET THROTTLE CUT WITH VOICE SAYING YOUR AIRCRAFT IS SAFE)
Replies: 22
Views: 1354

Re: HOW TO SET THROTTLE CUT WITH VOICE SAYING YOUR AIRCRAFT IS SAFE)

Smiithy89 wrote:what would happen if the safety switch was knocked when the model is flying would the motors shut off and model drop to earth ? , Dan
If a Pot is used to arm the throttle then it can't be knocked on or off - much safer than a switch
by lancaster
Wed Oct 05, 2016 10:57 am
Forum: 9Xtreme upgrade board
Topic: 9Xtreme V2? Or Discontinued?
Replies: 51
Views: 7963

Re: 9Xtreme V2? Or Discontinued?

Hi Guys
Its encouraging to hear from Steven that another run might be possible

HobbyKing are selling the 9X in Europe and in the UK and I noticed that Banggood are marketing the Flysky 9X

There is still a future for the 9X

regards Hans
by lancaster
Sun Aug 14, 2016 11:40 am
Forum: 9Xtreme upgrade board
Topic: Big Problem with my 9xtreme radio.
Replies: 70
Views: 5139

Re: Big Problem with my 9xtreme radio.

MikeB wrote:The resetting code will be included in releases, and there is a count of how many resets have occured. This count is displayed on a "Debug" menu.

Mike.
Thanks Mike - thats good to know

Remind me how we get into the 'Debug' menu

regards
Hans
by lancaster
Thu Aug 11, 2016 11:09 am
Forum: 9Xtreme upgrade board
Topic: Big Problem with my 9xtreme radio.
Replies: 70
Views: 5139

Re: Big Problem with my 9xtreme radio.

Thanks Octavios for the link. That gives me a good place to start. Also I see there are processor upgrade options but I'm not sure they're relevant with the 9Xtreme addon board installed. I have reading to do. I'm not giving up on this radio just yet. So far it has worked flawlessly for me. I just ...
by lancaster
Mon Jul 25, 2016 5:00 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme V2? Or Discontinued?
Replies: 51
Views: 7963

Re: 9Xtreme V2? Or Discontinued?

Certainly not... the 9XR-Pro is however on sale and even cheaper at £53.19!! But the 9X comes with a module and receiver that can be easily modified by replacing the TX antenna with the antenna on whatever module is selected This gives a much more adaptable final product when using ERsky and the 9X...
by lancaster
Wed Jul 20, 2016 4:17 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme V2? Or Discontinued?
Replies: 51
Views: 7963

Re: 9Xtreme V2? Or Discontinued?

octavios
sorry to get you exited but I thought £55.83 was a great price!
regards
hans
by lancaster
Tue Jul 19, 2016 7:09 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme V2? Or Discontinued?
Replies: 51
Views: 7963

Re: 9Xtreme V2? Or Discontinued?

Hi Guys Now Hobbyking are finally selling the 9X including RX and module in the UK for a great price , lets hope people realise what a bargin it is - especially when fitted out with the 9Xtreme and Ersky firmware and also lets hope sales of the 9xtreme then pick up I for one will be getting a second...
by lancaster
Wed Jun 15, 2016 11:04 pm
Forum: 9Xtreme upgrade board
Topic: Occasional Misbehavior - can I trust my radio?
Replies: 3
Views: 500

Re: Occasional Misbehavior - can I trust my radio?

Joao and Mike Thanks for the quick replies and suggestions I suspected the pogo connections might be the culprit The fault might be linked to periods when the TX has not been used or perhaps subjected to recent temperature changes It makes sense now you have explained how the gimbals have a direct p...
by lancaster
Wed Jun 15, 2016 8:55 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme V2? Or Discontinued?
Replies: 51
Views: 7963

Re: 9Xtreme V2? Or Discontinued?

Hi Steven
I am planning to order a second board in the next few weeks
regards
Hans
by lancaster
Wed Jun 15, 2016 8:33 pm
Forum: 9Xtreme upgrade board
Topic: Occasional Misbehavior - can I trust my radio?
Replies: 3
Views: 500

Occasional Misbehavior - can I trust my radio?

Hi Guys I have encountered a slightly worrying random fault with 9Xtreme as follows :- Very occasionally all the navigation keys stop working apart from the exit button, which surprisingly triggers my elevator high/low voice warning. When in this state, all flight controls work normally apart from t...
by lancaster
Mon Jun 06, 2016 9:23 am
Forum: 9Xtreme upgrade board
Topic: Can't trust my radio :-(
Replies: 33
Views: 2548

Re: Can't trust my radio :-(

Hi Joao
Glad to hear you fixed the problem
happy flying
regards
Hans
by lancaster
Mon Jun 06, 2016 8:46 am
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 188
Views: 24333

Re: My 9Xtreme Installation

Hi Birdman

I attach some information about the 9 pin connectors I used

Thanks to Joao for this

regards
Hans
by lancaster
Sun Jun 05, 2016 11:04 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme V2? Or Discontinued?
Replies: 51
Views: 7963

Re: 9Xtreme V2? Or Discontinued?

Hi Steven I dont think the Turnigy 9X is in widespread use in the UK but there might be more customers to come if people were made aware of the great combination of the 9X, the Extreme board and Ersky9X. I notice that HobbyKing are now selling the T9X package (Tx,module & Rx) in both the European an...
by lancaster
Mon May 02, 2016 9:31 am
Forum: Software
Topic: X4R r/x firmware help please
Replies: 6
Views: 801

Re: X4R r/x firmware help please

Hi Dave

Have you tried the videos from Drone Shop? https://www.youtube.com/watch?v=AnDTJ0bwG2E

Various files are available somewhere on these links

regards
Hans
by lancaster
Fri Apr 15, 2016 11:32 pm
Forum: Hardware
Topic: X6R lost bind and will not rebind
Replies: 3
Views: 954

Re: X6R lost bind and will not rebind

I have also had to rebind my new X6R

I thought it was because I had removed the XjT module, used another module and then replaced the XJT module

Go to advanced search