openrcforums

All fixed now I ended up reflashing and starting agai, I found one problem a cracked radius arm so new one arriving monday so just need to sort and tidy the wiring then set the pitch and tracking
So thanks for your help
Bill

Hi checked it out I have movement on the servos at id1 and 2 but nothing on id0 is this correct and if so it was working I hadn't checked them
Bill


Sent from my iPad using Tapatalk

Hi gohsthb just about finished building the 450 clone and trying to sort out the the controls, cyclic all working fine rudder and throttle ok but how do I get the collective pitch must be something in the er9x that I haven't done For safety whilst doing all this I am running with a receiver battery ...

Yes I have a spare just in case
Now a question I have been setting up the throttle cut safety switch whilst I wait for my hk-450 kit to arrive, I have it set but can you tell me what the difference is with thr and !thr please.
Cheers


Sent from my iPad using Tapatalk

Just out of interest I managed to get 9hrs out of the life04 before the alarm went off so one happy chappy.

Hi I had the same today when starting eepe tried a feu times so then went to the google site and right click save target as then ran it direct from my comp and worked fine
Bill


Sent from my iPad using Tapatalk

Hi Gohst thanks for the advise Have ordered the 450 kit as some of it has to come from hk, uk and eu it will be a while before it is built I got a sim Phoenix 5 but not sure how to program the 9x and er9x to get it to work properly Also a very important item I need to work out is how to set the long...

Hi Danny thanks for that will have a look
Cheers

Hi I am thinking of getting into heli flying
A hk-450 tt but not sure wether to get flybar less or flybar as I am a beginner it is a clone of the trex 450
Also the gyro a cheep one or a good one a fly mentor
Anybody got any advise please
Many thanks
Bill


Sent from my iPad using Tapatalk

Cheap and cheerful but at least I don't have to try and stick test meeter probes into small plugs and risk shorting and yes cheep means not very accurate but it will do for in the field
Bill

The one in the picture above

As above

The one shown above

It put about 700 Back in then tested on the meter =95% When it cut off but after four hrs rest it is reading 90% c1 3.399 c2 3.395 c3 3.396
Bill
This is the life04 battery I am using
9.9v 1300 mAh

Hi Mike managed to test it by moving the batt alarm level up and it works fine Got my new toy delivered today (battery tester) and it has now convinced me about power in batteries My 9.9 life was still reading 10v after two hrs use so decided to try the meter and was amazed that there was only 35% l...

Thanks for that Mike
Set it up but I think it will be a while before it triggers as I started yesterday at 10.1 ran for two hrs and today is still at 10.1 so we will see how it goes
Cheers
Bill

Hi Mike yes done the telemetry mod and is running fine with er9x telemetry nhtemplates
Bill


Sent from my iPad using Tapatalk

jhsa wrote:The correct panic voice for 9.1V with a LiFe battery would be "you're crashing in 10, 9, 8, 7..........3, 2, 1, whoop whoop terrain, terrain.."

Joao

Sent from my GT-I9195 using Tapatalk

In my case Sinking lol

Sounds like a good idea when I can work out how to do it

Ok so a life 9.9v cant go below 9.5 so will set the alarm for 9.6 as yet I have not used this one only the lipo This is what I mean by getting confused reading one thing from the manual then getting advise from people that actually use it and knowing what they are talking about. I have set the alarm...

Next stop PayPal to do the honers

Hi all first of all thank you all for the advise Yes I do have a turnigy accucell 6 charger and fire bag and have ballance charged it but will keep a close eye on it tomorrow, I have bought a life 04 9.9v to use as it is a bit smaller in size so not as tight a fit And yes I did a lot of google and f...

Hi All lipo,s are a new thing to me so a bit confused The situation was this T9x running er9x withe turnigy 2650 mamp battery Ive been running for about two hours and sudenly the tx switches off, the voltage was 10.6 when I started and I had the low volage set at 8v but as I was busy watching the ya...

ShowMaster wrote:AA battery connector mod for life04 battery use.

ImageUploadedByTapatalk1396708935.651704.jpg

Sent from my iPod touch using Tapatalk, small keys and a big finger.

I have ordered the parts to mod the connector

Well I decided to try the stock module and it worked ok so all I have to do is get the programer working I have checked all the contacts and no sign of burning or damage and no backlight so looks like it is goosed unless any one out there has any ideas Thanks again for all your advise Bill Good news...

Hi all Looks like the programer board has gone Got working without the programer but the telemetry is fine but I don't know whether it was plugging in the stock module or the battery cable that caused the problem so I will give the stock module a miss for the sake of three receivers So will get anot...

So far so good Couldn't find any burning so decided to remove the sp boards and try that just to see if they were the problem (they were working fine for a week so I am not blaming them) Connected everything back up as per original switch on hey presto got it, for a few seconds then a puff of smoke ...

Hi I have checked all the boards and there is no sign of any burning so will have to try and trace the power line tomorrow unless anyone comes up with another idea
Cheers 01:30 I'm off to bed
Bill

Hi Bill it is totally dead without the module even with the djt module
Had a close look at all the boards and cannot see any thing and I have checked the battery
Every thing was fine until I plugged the stock module back in.
Bill

Hi disaster having fitted the smd and antenna to the stock module plugged it in switch on get the splash screen then blank Got nothing at all now Is there any fuse in the system or anything else I should look at I have had a look inside for any obvious things such as burning but cannot see anything ...