Search found 16747 matches

by jhsa
Tue Jul 17, 2018 4:01 pm
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 3
Views: 65

Re: Turnigy 9XR pro shows blank blue bootloader screen

After reassembling. Didn't need to desolder anything. Just took the switch apart.

João
by jhsa
Tue Jul 17, 2018 12:23 pm
Forum: Turnigy 9XR PRO radio
Topic: Turnigy 9XR pro shows blank blue bootloader screen
Replies: 3
Views: 65

Re: Turnigy 9XR pro shows blank blue bootloader screen

The power switch is broken..
I also had that problem. Couldn't find replacements. I had to take the switch apart and clean the contacts with alcohol and a tooth brush.. Then had to assemble it again..

João
by jhsa
Mon Jul 16, 2018 5:45 am
Forum: ersky9x
Topic: Scripts for ersky9x
Replies: 33
Views: 2882

Re: Scripts for ersky9x

Thank you..

João
by jhsa
Sun Jul 15, 2018 7:34 am
Forum: FrSky Taranis radio
Topic: Qx7 unused connectors
Replies: 17
Views: 1628

Re: Qx7 unused connectors

This QX7 radio starts looking very appealing, thanks to Mike and Ersky9x.. :) Still can't beat my Ar9x and 9xtreme radios though. ;) Mike, just a little idea. You could probably make it even more flexible, if you would allow the Pot's analogs to be used as 3 position switches. Imagine someone like m...
by jhsa
Sat Jul 14, 2018 9:31 am
Forum: ersky9x
Topic: Scripts for ersky9x
Replies: 33
Views: 2882

Re: Scripts for ersky9x

:) ;) :D
by jhsa
Sat Jul 14, 2018 8:56 am
Forum: ersky9x
Topic: Scripts for ersky9x
Replies: 33
Views: 2882

Re: Scripts for ersky9x

Can you please..... :)

João
by jhsa
Sat Jul 14, 2018 8:44 am
Forum: ersky9xr
Topic: last firmware for Turnigy 9XR PRO
Replies: 3
Views: 197

Re: last firmware for Turnigy 9XR PRO

For the 9XR-PRO you want the "ersky9xr_rom.bin" file

João
by jhsa
Thu Jul 12, 2018 12:23 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

On my models I have programmed a "Motor active" warning if i turn the throttle switch ON but do not move it from the bottom for 20 seconds. Sometimes I turn the motor ON, start taxi to the runway, and then on the way just start chatting to a friend and forget the throttle is still ON, so if i touch ...
by jhsa
Thu Jul 12, 2018 12:16 pm
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3943
Views: 253669

Re: ERSKY9X Coding

Thank you Mike..

João
by jhsa
Wed Jul 11, 2018 10:18 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Alt/Vspd and Cells won't co-exist
Replies: 16
Views: 347

Re: Alt/Vspd and Cells won't co-exist

You did NOT waste anyone's time. We all always learn something :)

João
by jhsa
Wed Jul 11, 2018 10:06 am
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

Great.. :) Well done :) And I do apologize if I sounded a bit rude above. Not intended, but I was getting a bit desperate as I didn't know this particular "functionality" in Companion :( and though you just didn't know how it worked. Hence I was desperately trying to explain it with pictures and all...
by jhsa
Wed Jul 11, 2018 8:35 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Alt/Vspd and Cells won't co-exist
Replies: 16
Views: 347

Re: Alt/Vspd and Cells won't co-exist

Mstrens asked you if the problematic Arduino has an Atmega168 chip instead of an Atmega328.
You might have not seen the question? Please read his post again :)

João
by jhsa
Tue Jul 10, 2018 4:59 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

different way of thinking I guess.. I think like a "Mortal", the same as about 80 0r 90% of the users.. :D Yes, that is the way I think. Sometimes I am programming a line, think of what the next switch will do, and immediately select it on the line I am working.. then just do what I thought before, ...
by jhsa
Tue Jul 10, 2018 2:37 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Alt/Vspd and Cells won't co-exist
Replies: 16
Views: 347

Re: Alt/Vspd and Cells won't co-exist

Please zip and post your config files. :)
Also what radio and firmware are you using?

João
by jhsa
Tue Jul 10, 2018 2:35 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

Just tried it in Companion now.. it is like that.. So, if I am just trying to create some programming where I am experimenting, it makes it nearly impossible to work with. The fix is to create a bunch of logical switches with random functions, and then delete the ones you didn't need. that is what i...
by jhsa
Tue Jul 10, 2018 2:28 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

The problem is that you can not use another logical switch on the one you are currently programming without creating it before.. and that can be a pain.. :( I hope that Ersky9x doesn't change to something like this, at least not the same way.. :o

João
by jhsa
Tue Jul 10, 2018 2:23 pm
Forum: Hardware
Topic: Grounding to Rx (FrSky D8R-XP) of on board glow device
Replies: 9
Views: 226

Re: Grounding to Rx (FrSky D8R-XP) of on board glow device

Good luck :) As long as we have fun safely, that is what matters!! ;) :D

João
by jhsa
Tue Jul 10, 2018 11:35 am
Forum: OpenLRSng hardware
Topic: telemetry wiring
Replies: 6
Views: 220

Re: telemetry wiring

I wish you more luck than i had then :)

João
by jhsa
Tue Jul 10, 2018 11:34 am
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

Thanks Mike. I use Ersky9x, so I wouldn't know that :)

João
by jhsa
Tue Jul 10, 2018 10:20 am
Forum: OpenLRSng hardware
Topic: telemetry wiring
Replies: 6
Views: 220

Re: telemetry wiring

I am not sure, but I think that with Ersky9x you don't need the Arduino converter anymore.. Just saying, I don't use this system. Also, is the 1W tx powered by the radio's battery? I wouldn't do that as the 9XR-PRO's power switch might not cope with such current draw. It is bad, really bad. I don't ...
by jhsa
Tue Jul 10, 2018 10:11 am
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

Sorry, I am not very familiar with OpenTX, so I take the risk asking a stupid question. What does "RC" mean in this context?? :)
I think I have installed the latest companion.. RC4. Is this what RC mean? If so, it does not seem to be fixed.

João
by jhsa
Tue Jul 10, 2018 9:59 am
Forum: Hardware
Topic: Grounding to Rx (FrSky D8R-XP) of on board glow device
Replies: 9
Views: 226

Re: Grounding to Rx (FrSky D8R-XP) of on board glow device

Yes but having the Rx dead for one second and then back to life again is still way better than having the engine shutting off... and NOT back to life again. :o I wouldn't count on it.. even if the brownout would last only one second (which it doesn't believe me, been there :) ) it is time enough to...
by jhsa
Tue Jul 10, 2018 8:43 am
Forum: Hardware
Topic: Grounding to Rx (FrSky D8R-XP) of on board glow device
Replies: 9
Views: 226

Re: Grounding to Rx (FrSky D8R-XP) of on board glow device

The voltage drops under load could shut off your receiver, and that would be your real problem. ;) And that is the reason why I prefer the 2 batteries setup :) About the grounds. On the 2 battery setup the batteries grounds are not connected together. As you can see, the glow battery connects only t...
by jhsa
Tue Jul 10, 2018 8:12 am
Forum: Hardware
Topic: Grounding to Rx (FrSky D8R-XP) of on board glow device
Replies: 9
Views: 226

Re: Grounding to Rx (FrSky D8R-XP) of on board glow device

You can connect exactly as shpwn in Pic2. The receiver receives the ground from the BEC. The Glow Driver receives the ground directly from the battery. So, only the signal wire needed from the Glow Driver to the Battery, exactly as in the picture. This way, ground loops are avoided. If you need to c...
by jhsa
Mon Jul 09, 2018 10:18 pm
Forum: Hardware
Topic: Aiuto turnigy 9x
Replies: 5
Views: 123

Re: Aiuto turnigy 9x

Good that you brought it back to life.. I also suspected the fuses. better to use Companion to program the radio from now on.
well done. :)

João
by jhsa
Mon Jul 09, 2018 10:14 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

If it is going to do that, then in my opinion, it should do it dynamically so that when you create an entry for another logical switch, it then appears in the drop down lists for other logical switches. But even like this Mike, we can't create a logical switch using the next one on its fields.. And...
by jhsa
Mon Jul 09, 2018 10:06 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

That is absolutely NOT intuitive at all :(
When I am programming Logical switches trying to achieve something, how the heck should I know how many I will need? :)
No wonder that even I have problems with it, and I have been around for quite a while :)
Thanks for the explanation Mike..

João
by jhsa
Mon Jul 09, 2018 9:07 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

Ok, downloaded and installed the latest 2.2.2 RC4 and the same problem is still there..
Please try programming on the radio.

João
by jhsa
Mon Jul 09, 2018 9:02 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

I see what you mean after installing 2.2.1. it seems i am only able to select one single logical switch, and that is L01..
It looks like this version of companion might have a bug. can you please try the programming on the radio itself??

João
by jhsa
Mon Jul 09, 2018 8:27 pm
Forum: openTx
Topic: "Smart" Throttle Cut?
Replies: 34
Views: 902

Re: "Smart" Throttle Cut?

This is my last attempt. after this i don't know what else to do.. This works. it is easy enough to find that L1 is the same as L01, L2 is the same as L02, and L3 is the same as L03. Please look at the pictures..

Go to advanced search