Search found 16845 matches

by jhsa
Mon Aug 13, 2018 10:37 am
Forum: ersky9xr
Topic: Assign ID to exponential travel profiles
Replies: 9
Views: 248

Re: Assign ID to exponential travel profiles

Try:
DrSw1 set as !IDv (!ID2)
DrSw2 set as !ID^ (!ID1)

In my opinion it will work better. I have just tried in Eepskye :)
By the way, triple rates are explained on the Er9x manual, page 42 and 43.

João
by jhsa
Sun Aug 12, 2018 7:44 pm
Forum: Hardware
Topic: Taranis X9E charging issues
Replies: 2
Views: 103

Re: Taranis X9E charging issues

18V might be too much?? :o

João
by jhsa
Sun Aug 12, 2018 12:30 pm
Forum: ersky9xr
Topic: Assign ID to exponential travel profiles
Replies: 9
Views: 248

Re: Assign ID to exponential travel profiles

This is why I asked if he wanted the triple rate. I didn't understand his question :)
by jhsa
Sun Aug 12, 2018 12:51 am
Forum: ersky9xr
Topic: Assign ID to exponential travel profiles
Replies: 9
Views: 248

Re: Assign ID to exponential travel profiles

You mean something like a triple rate but with Expo only?

João?
by jhsa
Sun Aug 12, 2018 12:22 am
Forum: General Information & Rules
Topic: Problem with forum. Repeatedly "signed off"
Replies: 26
Views: 1160

Re: Problem with forum. Repeatedly "signed off"

Tapatalk seem to be ok though..
About an hour ago, I forgot to copy a post before hitting the "Submit" button.. lost it :(
Will need to write it all again.. :(

João
by jhsa
Sat Aug 11, 2018 6:49 pm
Forum: General Information & Rules
Topic: Problem with forum. Repeatedly "signed off"
Replies: 26
Views: 1160

Re: Problem with forum. Repeatedly "signed off"

Here it is not as bad, but I was already logged off twice today.. I would say it is getting worse every day.. I hope Rob can find some time to have to look at it.. :(

João
by jhsa
Sat Aug 11, 2018 6:47 pm
Forum: General RC Electronic Projects and Discussion
Topic: FrskyRX_USB dongle
Replies: 22
Views: 5653

Re: FrskyRX_USB dongle

Strange, it should be recognized in "Human Interface Devices, as HID-compliant game controller" I remember that when I first built mine it wasn't also recognized.. I had to uninstall some driver.. It was a while ago. Then it worked.. One thing you can try.. Do you have some old USB2.0 ports? try it ...
by jhsa
Sat Aug 11, 2018 10:50 am
Forum: General Information & Rules
Topic: Problem with forum. Repeatedly "signed off"
Replies: 26
Views: 1160

Re: Problem with forum. Repeatedly "signed off"

No, I also have windows 7 64 bit :)

João
by jhsa
Sat Aug 11, 2018 3:07 am
Forum: General Information & Rules
Topic: Problem with forum. Repeatedly "signed off"
Replies: 26
Views: 1160

Re: Problem with forum. Repeatedly "signed off"

Tapatalk seems tonbe working for me as well. Only on the PC I have been logged out a few times..

João
by jhsa
Fri Aug 10, 2018 11:48 am
Forum: openTx
Topic: Invalid board version 2.2.2 Turnigh9x
Replies: 7
Views: 205

Re: Invalid board version 2.2.2 Turnigh9x

Er9x for the 9x radio is still being developed. OpenTX devs seem to have forgotten about this radio :)

João
by jhsa
Fri Aug 10, 2018 8:31 am
Forum: Turnigy 9XR PRO radio
Topic: CPU temperature at 59º
Replies: 5
Views: 236

Re: CPU temperature at 59º

Thanks Mike, didn't know that.. :) It seems that it doesn't work that well though, if it has such a big tolerance as far as I understood your post.. :)

João
by jhsa
Thu Aug 09, 2018 9:16 pm
Forum: Turnigy 9XR PRO radio
Topic: CPU temperature at 59º
Replies: 5
Views: 236

Re: CPU temperature at 59º

Another analog input that would be much more useful if used for something else :) ;)

João
by jhsa
Thu Aug 09, 2018 8:26 pm
Forum: Software
Topic: telemetry retains the value
Replies: 4
Views: 485

Re: telemetry retains the value

Ersky9x also runs on the Taranis radio, and it works the way you want. I remember a while ago that Mike improved the telemetry values displayed when telemetry is lost.. I believe the only ones that keep the last value are the GPS coordinates for obvious reasons :)

João
by jhsa
Thu Aug 09, 2018 12:38 pm
Forum: The Pickled Gnu (The Pub)
Topic: Flash lights on release of servo - Bait Boat Help
Replies: 46
Views: 792

Re: Flash lights on release of servo - Bait Boat Help

I have no idea on this one as I never used that flight controller. But why do you need a flight controller on a boat?? :o :mrgreen:

João
by jhsa
Thu Aug 09, 2018 11:15 am
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 6
Views: 545

Re: FRSKY R9M compatibility?

Mike, did you do anything regarding that problem of the radio not staying in the bootloader on the m2561 if the FTDI adapter is built permanently inside the radio? Currently, if i update my radio to a version with bootloader, I lose the ability to share models and voice files between PC and radio's ...
by jhsa
Wed Aug 08, 2018 10:17 am
Forum: ersky9x
Topic: Is it feasable to use BT as Head tracker connection to Tx?
Replies: 1
Views: 121

Re: Is it feasable to use BT as Head tracker connection to Tx?

Ersky9x supports trainer over bluetooth. I believe Mike also added support for an HC-05 to the QX7. So, I think that is very possible :)

João
by jhsa
Tue Aug 07, 2018 7:18 pm
Forum: General help (FrSky Taranis radio)
Topic: taranis wont turn on
Replies: 98
Views: 24597

Re: taranis wont turn on

It sounds like some hardware problem. You could try opening the radio and make sure all connectors are fully seated. Remove the battery first..

João
by jhsa
Tue Aug 07, 2018 10:00 am
Forum: Hardware
Topic: D8R-XP red led OFF during normal operation
Replies: 6
Views: 205

Re: D8R-XP red led OFF during normal operation

Does the LED flash when it goes into failsafe? Does it light at all when binding?
If not, then it might be a faulty LED or some bad soldering somewhere..

João
by jhsa
Mon Aug 06, 2018 7:50 am
Forum: General Information & Rules
Topic: Problem with forum. Repeatedly "signed off"
Replies: 26
Views: 1160

Re: Problem with forum. Repeatedly "signed off"

It just happened to me again.. Had to re-post on another topic, as I was signed off..

João
by jhsa
Mon Aug 06, 2018 7:48 am
Forum: FrSky Taranis radio
Topic: HELP!! Need capacitor/diode values of RF module.
Replies: 14
Views: 433

Re: HELP!! Need capacitor/diode values of RF module.

Too late I know :(

I wish we could guess the problems before they happen :)

João
by jhsa
Mon Aug 06, 2018 6:50 am
Forum: FrSky Taranis radio
Topic: HELP!! Need capacitor/diode values of RF module.
Replies: 14
Views: 433

Re: HELP!! Need capacitor/diode values of RF module.

A little tip for removing hot glue.
Apply some alcohol over it, wait a few seconds, and it will come off..

João
by jhsa
Sun Aug 05, 2018 9:03 pm
Forum: General Information & Rules
Topic: Problem with forum. Repeatedly "signed off"
Replies: 26
Views: 1160

Re: Problem with forum. Repeatedly "signed off"

This seems to be also happening to me, but I use "Lastpass" and it logs me in again automatically. But yes, I have been kicked out a few times now..

João
by jhsa
Sun Aug 05, 2018 2:28 pm
Forum: The Pickled Gnu (The Pub)
Topic: Flash lights on release of servo - Bait Boat Help
Replies: 46
Views: 792

Re: Flash lights on release of servo - Bait Boat Help

wouldn't the left stick be more suitable for controlling the camera?

João
by jhsa
Sun Aug 05, 2018 1:39 pm
Forum: The Pickled Gnu (The Pub)
Topic: Flash lights on release of servo - Bait Boat Help
Replies: 46
Views: 792

Re: Flash lights on release of servo - Bait Boat Help

The door voices should be easier to program.

There is something I don't understand, you want the radio to start speaking the doors or lights states when you power the radio ON or change model?


João
by jhsa
Sat Aug 04, 2018 2:32 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 51134

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

No, you don't see the voice files.. You can send voice files to the card though.. But please note that if they have the same file names as another files on the SD Card, they will replace them.

João
by jhsa
Fri Aug 03, 2018 8:45 pm
Forum: Turnigy 9XR PRO radio
Topic: Wierd issue with right gimbal
Replies: 80
Views: 7213

Re: Wierd issue with right gimbal

Ok, check if the case of the pot is moving on the gimbal.. It has happened and the fix is to somehow glue the pot case to the gimbal. then calibrate the sticks again. It might not be the issue, but its worth check. you could use hot glue for example, if that is the case.. João Please check this.. J...
by jhsa
Fri Aug 03, 2018 5:13 pm
Forum: The Pickled Gnu (The Pub)
Topic: Flash lights on release of servo - Bait Boat Help
Replies: 46
Views: 792

Re: Flash lights on release of servo - Bait Boat Help

I have programmed the bait doors on ID0 and ID2. the lights blinked with them.. You might have changed something then..

João
by jhsa
Fri Aug 03, 2018 7:36 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 51134

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

The latest is always the best because Mike might have improved it and implemented new features. Same goes to the firmware..

João
by jhsa
Fri Aug 03, 2018 1:25 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 51134

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Of course, How do you think you communicate with the voice module? ;) There is a video link on the first post that shows how it is done..

João
by jhsa
Fri Aug 03, 2018 1:20 am
Forum: The Pickled Gnu (The Pub)
Topic: Flash lights on release of servo - Bait Boat Help
Replies: 46
Views: 792

Re: Flash lights on release of servo - Bait Boat Help

Ok, I think I've programmed all the stuff. See the attached file CH3 - Static LightsTurn them on with !GEA CH4 - Lights that blink when both left and right bait doors open. They need to be turned ON with !AIL before.. CH5 - Left Bait door. Switch ID0 CH6 - Right Bait door. Switch ID2 Switch needs to...

Go to advanced search