Search found 16660 matches

by jhsa
Sun Jun 24, 2018 7:56 pm
Forum: er9x
Topic: Coollvse OLED issue
Replies: 19
Views: 458

Re: Coollvse OLED issue

given the other inconsistencies in the firmware I still suspect firmware... Very unlikely. There are probably thousands of radios running Er9x without problems, so if yours is not working as it should, it is probably a problem with your radio's hardware, not a problem with the firmware. As I said, ...
by jhsa
Sun Jun 24, 2018 9:31 am
Forum: Software
Topic: Who's got time for a noob? 9XR & 9XR Pro
Replies: 4
Views: 337

Re: Who's got time for a noob? 9XR & 9XR Pro

And that is because OpenTX and Er9x/Ersky9x are not compatible. You will have to re-program them all, or if you saved the radios eeproms to your computer, flash Er9x / Ersky9x to the radios and use them again.. If you didn't save the eeproms, you have lost them forever :(

João
by jhsa
Sun Jun 24, 2018 9:24 am
Forum: er9x
Topic: Coollvse OLED issue
Replies: 19
Views: 458

Re: Coollvse OLED issue

Mike, the model 1 / splash screen problem looks like it is rebooting? This could perhaps indicate an hardware problem somewhere? The Er9x firmware is more than fine installed in radios it was design for, the 9x radio. If someone build a radio from scratch, and wants to use Er9x or OpenTX, has to mak...
by jhsa
Fri Jun 22, 2018 10:02 pm
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3933
Views: 249083

Re: ERSKY9X Coding

Timer reset can be set to be done with a switch.. What about expanding that to the telemetry reset?
Perhaps you could even define what parameters to reset.

João
by jhsa
Thu Jun 21, 2018 10:23 am
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3933
Views: 249083

Re: ERSKY9X Coding

I don't have the radio, but Thank You for all you do for this hobby..

João
by jhsa
Tue Jun 19, 2018 10:36 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Well, at least you have your X-Lite with you.. ;) :mrgreen:

João
by jhsa
Tue Jun 19, 2018 9:49 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Kilrah wrote:
Tue Jun 19, 2018 9:32 am
I'm on a work trip until the end of the week
Having fun eh?? :mrgreen: :mrgreen:

Enjoy ;) :D

João
by jhsa
Tue Jun 19, 2018 9:31 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

You? I don't have any original X stuff :)

João
by jhsa
Tue Jun 19, 2018 7:46 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Robert, the only way you might have had model match on D8 receivers was if you used the MultiModule. Frsky as far as we all know, never had that. I use Frsky for 8+ years, I think I would have known if there was a cool feature like this one. I remember that one of the reasons that I though it wasn't...
by jhsa
Tue Jun 19, 2018 7:38 am
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3933
Views: 249083

Re: ERSKY9X Coding

Yeah, reading Mike's post again I realize that I misunderstood it the first time. Probably too tired :)

João
by jhsa
Mon Jun 18, 2018 10:51 pm
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3933
Views: 249083

Re: ERSKY9X Coding

Are the apps also for the other tx, or are they related to the X-Lite only? ;)
Thanks for all Mike..
João
by jhsa
Sun Jun 17, 2018 2:31 pm
Forum: Turnigy 9XR PRO radio
Topic: RTC not working
Replies: 6
Views: 340

Re: RTC not working

Please be careful not to short anything while measuring :)

João
by jhsa
Sun Jun 17, 2018 12:49 am
Forum: ersky9x
Topic: 9XR dropping off USB-computer connection???
Replies: 3
Views: 134

Re: 9XR dropping off USB-computer connection???

the bootloader is in the firmware file. put the firmware file inside the "firmware" folder on the SD card, start the radio in maintenance mode by turning the radio ON while holding both horizontal trims away from the center (away from each other). then select "Upload Bootloader". Then select the sam...
by jhsa
Sat Jun 16, 2018 11:10 pm
Forum: ersky9x
Topic: 9XR dropping off USB-computer connection???
Replies: 3
Views: 134

Re: 9XR dropping off USB-computer connection???

you have very old versions of the firmware and bootloader.. Please update to the latest and then see if the problem is still there.. you can find the latest ersky9x firmware at www.er9x.com

João
by jhsa
Sat Jun 16, 2018 3:14 pm
Forum: er9x
Topic: Coollvse OLED issue
Replies: 19
Views: 458

Re: Coollvse OLED issue

That's the think, that board does not run Ersky9x as it has an atmega128 processor. It runs Er9x. Not sure if er9x supports that display.. You need Mike to confirm that..
we thought you were talking about another board..

João
by jhsa
Sat Jun 16, 2018 3:11 pm
Forum: ersky9xr
Topic: Trim problem
Replies: 20
Views: 634

Re: Trim problem

Please see picture..

João
by jhsa
Sat Jun 16, 2018 10:32 am
Forum: ersky9xr
Topic: Trim problem
Replies: 20
Views: 634

Re: Trim problem

Good that is working :) For the RTC I guess you need Mike's opinion on this, as he knows much more about the radio than I do. If you say that the RTC battery Is correctly installed and the voltage is 3.3V, then it should be working :o I would check again the battery polarity and that the connection ...
by jhsa
Sat Jun 16, 2018 10:24 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Well, it would be wonderful if they implemented that. One more towards safety :) But then, I think you guys should test it yourselves before removing the option from the menu, isn't that the logical thing to do? :) ;) I know that my logic is 99% of the times the opposite of the Developer's logic, bu...
by jhsa
Fri Jun 15, 2018 11:09 pm
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Bob, as stated above several times, it is impossible you had model match on D8 receivers using an original frsky RF module.. that simply never existed. Only the multi module can do that. I use frsky D8 gear for over 8 years now and i would have known if their original gear would do model match. it j...
by jhsa
Fri Jun 15, 2018 11:02 pm
Forum: eepSKYe
Topic: eepSKYe
Replies: 635
Views: 76097

Re: eepSKYe

I think that at least the VA's could be simulated.. probably we could create some simulated telemetry events so we could also program alarms.. Just an idea of course..

João
by jhsa
Fri Jun 15, 2018 3:14 pm
Forum: eepSKYe
Topic: eepSKYe
Replies: 635
Views: 76097

Re: eepSKYe

Mike, what about if we could also program the voice in eepskye and actually hear on the PC what we are programming? That would need a "Voice" folder somewhere, probably in the eepe directory? This could of course be extended to eepe..
Thanks
João
by jhsa
Fri Jun 15, 2018 2:34 pm
Forum: ersky9xr
Topic: Trim problem
Replies: 20
Views: 634

Re: Trim problem

Yep, it looks like you might have found the problem :) Monday radio, after the weekend some workers do not know where is right and left :D

João
by jhsa
Fri Jun 15, 2018 10:43 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Ok, I think there was a bit of confusion here :)

João
by jhsa
Fri Jun 15, 2018 8:34 am
Forum: ersky9xr
Topic: Trim problem
Replies: 20
Views: 634

Re: Trim problem

You can try the following, go to the "Radio Setup/Hardware" menu, scroll down to the stick reversing option and select it. Keep pressing the right key until the stick(s) that is giving problems is/are reversed. See if all sticks now move in the same direction of their trims. But before you do that, ...
by jhsa
Fri Jun 15, 2018 8:26 am
Forum: ersky9xr
Topic: Trim problem
Replies: 20
Views: 634

Re: Trim problem

Well writing them on the wrong order doesn't help, because that is what tells us if the sticks are badly wired or not.
So all that test you did was useless :(

João
by jhsa
Fri Jun 15, 2018 8:22 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

Well, I also thought you were talking about the multi module.. Let's clear something here. With the original Frsky modules, and as Kilrah said, model match never worked with D8 receivers. With the multi module it akways did because of what Mike explained above. So, if you were using the internal mod...
by jhsa
Fri Jun 15, 2018 12:35 am
Forum: ersky9xr
Topic: Trim problem
Replies: 20
Views: 634

Re: Trim problem

It looks like your Right Vertical stick is reversed in hardware.. the others seem to be OK.. the rudder is left horizontal, right? so O68B is stick to the right, and 0163 is stick to the left? if so, this sem to be the expected values. You might need to calibrate your sticks though.. The Right verti...
by jhsa
Fri Jun 15, 2018 12:22 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

I use the multi module to fly all my frsky stuff. I use mainly D8 receivers and i like them more than the X stuff.. They seem to be somehow more reliable..

João
by jhsa
Thu Jun 14, 2018 10:10 am
Forum: openTx for FrSky radios
Topic: Lost my model match when installing 2.2.1
Replies: 32
Views: 816

Re: Lost my model match when installing 2.2.1

As far as we know D8 receivers don't support it, and I also can't see anything in the multiprorocol doc stating it has implemented a trick to make it work anyway... Aka we go by what whe've been able to find. I am surprised that you guys as DEVs didn't really try to see if it works, because if you ...

Go to advanced search