Search found 29 matches
- Tue Apr 17, 2018 7:11 am
- Forum: SMARTIEPARTS PROGRAMMER
- Topic: FS-9XTH - smartie parts - OpenTX
- Replies: 0
- Views: 5927
FS-9XTH - smartie parts - OpenTX
Guys I've been using a Taranis 9D+ for the past 3 years and only starting to get into OpenTX in the past week. Ive dug out my old radio, which is a Fly Sky 9XTH. It has the Smartieparts programming board which I installed myself and it work perfectly before. Since it's been a long time, I cannot rem...
- Tue Feb 23, 2016 4:00 pm
- Forum: FrSky Taranis radio
- Topic: Taranis Plus with OrangeRx Module and R410X problems
- Replies: 7
- Views: 5663
Re: Taranis Plus with OrangeRx Module and R410X problems
Daedalus66 It's the new one I have from the HobbyKing link you gave above. I also have an older version for my Fly Sky FS-TH9X which works perfectly with all my other models and orangerx receivers. I forgot to look at my transmitter today but just checked the Open Tx site and seems that the latest f...
- Mon Feb 22, 2016 10:23 pm
- Forum: FrSky Taranis radio
- Topic: Taranis Plus with OrangeRx Module and R410X problems
- Replies: 7
- Views: 5663
Re: Taranis Plus with OrangeRx Module and R410X problems
Daedalus6 Expert started off by saying I should be purchasing the USB programmer for flashing the module firmware until I clarified that transmitter channel order is set to AETR and the module should be set to AETR as default. He told me then to check and update as required to version of Open Tx on ...
- Mon Feb 22, 2016 1:46 pm
- Forum: FrSky Taranis radio
- Topic: Taranis Plus with OrangeRx Module and R410X problems
- Replies: 7
- Views: 5663
Re: Taranis Plus with OrangeRx Module and R410X problems
Daedalus66 Thanks for helping out again. the control monitor is showing correct function and correlates correctly with stick inputs. Compared with previous transmitter and it's ok too. My channel order is AETR. Currently away from home so no access to equipment. Still not tried to recalibrate the ES...
- Mon Feb 22, 2016 4:35 am
- Forum: FrSky Taranis radio
- Topic: Taranis Plus with OrangeRx Module and R410X problems
- Replies: 7
- Views: 5663
Taranis Plus with OrangeRx Module and R410X problems
Guys Bought a Taranis Plus to replace my Fly Sky FS-TH9X. Also bought the OrangeRx module and an R410X receiver as I am flying 50mm EDF's. I was able to successfully bind the Tx to the Rx but when I plug in the an ESC with motor, I get a constant beeping. I have turned off the internal RF and turned...
- Wed Mar 18, 2015 8:25 pm
- Forum: er9x model setup
- Topic: HK Bushmaster with OrangeRX RX3S
- Replies: 23
- Views: 21149
Re: HK Bushmaster with OrangeRX RX3S
Joao
Thanks for your help. I used the second mix you suggested and the Stabilizer on/off function now works great. Sorry for being a noob! Can't wait to fly the plane again but awaiting a servo for the elevator, which died on me during the last flight.
Cheers
Etops
Thanks for your help. I used the second mix you suggested and the Stabilizer on/off function now works great. Sorry for being a noob! Can't wait to fly the plane again but awaiting a servo for the elevator, which died on me during the last flight.
Cheers
Etops
- Wed Mar 18, 2015 12:56 pm
- Forum: er9x model setup
- Topic: HK Bushmaster with OrangeRX RX3S
- Replies: 23
- Views: 21149
Re: HK Bushmaster with OrangeRX RX3S
Mike Got another problem regarding the mixing of the Channel 6 or Aux channel to turn the gyro function on/off. I have tried every permutation I can think of, but so far been unsuccessful. I want to use the Gear switch to operate the on/off function of the stabilizer. What do I choose and source and...
- Sun Mar 08, 2015 5:53 pm
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
MikeB
Noted. thanks again.
Etops
Noted. thanks again.
Etops
- Sun Mar 08, 2015 3:34 pm
- Forum: Software
- Topic: eepe cannot read eprom
- Replies: 4
- Views: 3417
Re: eepe cannot read eprom
MikeB
All is good now!
Cheers
Etops
All is good now!
Cheers
Etops
- Sun Mar 08, 2015 3:34 pm
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
MikeB
Models 13 and 14 are currently not in my hangar but on my wishlist. Don't really understand why they are taking up so much memory at 160 and 129 respectively. neither of them has any mixing on them as far as I am aware!
Etops
Models 13 and 14 are currently not in my hangar but on my wishlist. Don't really understand why they are taking up so much memory at 160 and 129 respectively. neither of them has any mixing on them as far as I am aware!
Etops
- Sun Mar 08, 2015 8:52 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
MikeB
Just been able to download the latest version of eePe.
It's all working now I think. Happy Days! Thanks for all the pointers.
Judging by my hex file, do I have much memory left over for mixing?
Cheers
Etops
Just been able to download the latest version of eePe.
It's all working now I think. Happy Days! Thanks for all the pointers.
Judging by my hex file, do I have much memory left over for mixing?
Cheers
Etops
- Sun Mar 08, 2015 8:38 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
MikeB
Refer the eepe snippy screen cut for the version.
Seems old, 2012? Is this the latest version of eepe
Regards
Etops
Refer the eepe snippy screen cut for the version.
Seems old, 2012? Is this the latest version of eepe
Regards
Etops
- Sat Mar 07, 2015 4:09 pm
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
MikeB I am using SVN:er9x-r809, VERS:v1. 104-MIKE, Date:22.01.2014, Time:19:09:24. Currently not at home so do not know the eepe version but I did download it last week from one of the ER9X website so I am assuming it is latest version. I watched a youtube video which taught how to load only the mod...
- Sat Mar 07, 2015 3:55 pm
- Forum: Software
- Topic: eepe cannot read eprom
- Replies: 4
- Views: 3417
Re: eepe cannot read eprom
jhsa
I think you might be onto something there! Let me check and get back to you.
Thank you!
Cheers
Etops
I think you might be onto something there! Let me check and get back to you.
Thank you!
Cheers
Etops
- Sat Mar 07, 2015 4:49 am
- Forum: Software
- Topic: eepe cannot read eprom
- Replies: 4
- Views: 3417
eepe cannot read eprom
Guys I am using a Fly Sky FS-TH9S Tx with OrangeRx 2.4 GHz module. I flashed my Tx last year with ER9X using windows XP. have not used the eepe since until now. Pc is now using win 7. having problems with eeprom mem alert and unbinding of receivers recently. want to reload ER9X or update to newest v...
- Sat Mar 07, 2015 4:41 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
rperkins
thank you very much for your time and advice. learning all the time. this year is definitely one for really getting into ER9X.
cheers
etops
thank you very much for your time and advice. learning all the time. this year is definitely one for really getting into ER9X.
cheers
etops
- Sat Mar 07, 2015 4:29 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
rperkins
in eepe config page, i have selected m64 and getting the another message. refer photos.
Cheers
Etops
in eepe config page, i have selected m64 and getting the another message. refer photos.
Cheers
Etops
- Sat Mar 07, 2015 4:12 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
rperkins After some google searching I been able to find out sufficient info to install the driver for usbasp! Thank you for prodding me in the right way! ;-) how do i save my model settings now using the eepe? I have tried and get the AVRDUDE message as per attachment. Can anybody enlighten me furt...
- Sat Mar 07, 2015 3:44 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
rperkins
thanks for the reply. I was using windows XP last year when i flashed the firmware of my FS-TH9X. what is zadig?
cheers
etops
thanks for the reply. I was using windows XP last year when i flashed the firmware of my FS-TH9X. what is zadig?
cheers
etops
- Sat Mar 07, 2015 2:38 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
Re: eepe and loading ER9X error
Guys Thanks for all the valuable advice. Downloaded the drivers again but still get the same thing! Wonder what's wrong. I am using Windows 7...... As for the eprom memory alert, I have 11 planes programmed but they are mostly basic without mixing as all my planes are bank and yank and no flaps. Jus...
- Wed Mar 04, 2015 1:51 am
- Forum: Software
- Topic: eepe and loading ER9X error
- Replies: 22
- Views: 11837
eepe and loading ER9X error
Guys About a year ago, installed a smartie parts board into my Fly Sky FS-TH9x and flashed the firmware without any problems. I've done a pc format since then and lost all my data and most recollection of how I did it. After searching youtube and reading er9x wiki it's starting to get a bit more fam...
- Tue Mar 03, 2015 12:06 pm
- Forum: er9x model setup
- Topic: HK Bushmaster with OrangeRX RX3S
- Replies: 23
- Views: 21149
Re: HK Bushmaster with OrangeRX RX3S
Kilrah What is the difference between FULL and HALF? I have found that setting FULL makes my horns travel aft towards the flaps. The control horns for flaps included in the kit are too short if the servo arm in centered. Is there any adverse effect using FULL in lieu of HALF. This seems to work for ...
- Tue Mar 03, 2015 2:22 am
- Forum: er9x model setup
- Topic: HK Bushmaster with OrangeRX RX3S
- Replies: 23
- Views: 21149
Re: HK Bushmaster with OrangeRX RX3S
While my aileron problem has been solved, now remains the flaps problem. I have centered the flap servos using a servo tester. The servo horns are not the same and differ in angle after i attach the horn. Having plugged in the flap servos into the the Rx and turned on the Tx, the servos move aft tow...
- Mon Mar 02, 2015 12:19 pm
- Forum: er9x model setup
- Topic: HK Bushmaster with OrangeRX RX3S
- Replies: 23
- Views: 21149
Re: HK Bushmaster with OrangeRX RX3S
MikeB Thanks for your reply. I managed to sort out my aileron problem by using the easy way out and utilised the included Y Harness. The flaps problem I want to use on the Gear channel as the Aux channel is used for switching on/off the gyro. I want to use the Gear switch for flaps; using Y harness,...
- Mon Mar 02, 2015 2:28 am
- Forum: er9x model setup
- Topic: HK Bushmaster with OrangeRX RX3S
- Replies: 23
- Views: 21149
HK Bushmaster with OrangeRX RX3S
Guys Trying to set up a HK Bushmaster with the OrangeRX RX3S Stabilization receiver on my Fly Sky FS-TH9x with ER9X firmware. The Rx has channels for Throttle, Rudder, Elevator, Aileron Left, Aileron Right, Gear and Aux. At the moment I am trying to setup each servo including ailerons and flaps on i...
- Sun Mar 02, 2014 3:43 am
- Forum: er9x
- Topic: 3 Channel Elevator & Rudder Programming
- Replies: 4
- Views: 5187
Re: 3 Channel Elevator & Rudder Programming
Thanks Guys I tried something different. On the Mixer Page, moved Channel 1 Aileron to Channel 4 and reduced the weight of the Rudder to Zero. It has the affect I want when static but looking at Daedalus66's comments above, he's made some valid points but not sure if they will affect my flying. Need...
- Sat Mar 01, 2014 7:51 am
- Forum: er9x
- Topic: 3 Channel Elevator & Rudder Programming
- Replies: 4
- Views: 5187
3 Channel Elevator & Rudder Programming
Guys I have converted a Nine Eagles Sky Eagle with a brushless motor. This plane is three channel but instead of the usual bank and yank; ailerons and elevator, it has rudder and elevator! I would like to ask should I programme the ER9x Aileron Channel to receive Rudder signals or just connect the r...
- Mon Feb 03, 2014 1:15 am
- Forum: er9x
- Topic: ER9X Radio Setup Sound Options on R809
- Replies: 2
- Views: 2296
Re: ER9X Radio Setup Sound Options on R809
Mike
Thanks for the reply, very interesting. I will look for that other threads.
Cheers
Etops
Thanks for the reply, very interesting. I will look for that other threads.
Cheers
Etops
- Sun Feb 02, 2014 12:11 am
- Forum: er9x
- Topic: ER9X Radio Setup Sound Options on R809
- Replies: 2
- Views: 2296
ER9X Radio Setup Sound Options on R809
Hi Guys All new to this ER9X. I have a Fly Sky TH9X and recently added the the Smartieparts programmer board and LCD backlight. After reprogramming with ER9X to R809; have found that in the sound settings in Radio Setup, there is no difference to Beeping Length, Volume, Haptic Strength and no audibl...