Search found 13328 matches

by MikeB
Sun Aug 20, 2017 5:29 pm
Forum: Software
Topic: Flashed Er9x - extremely disapointed
Replies: 14
Views: 209

Re: Flashed Er9x - extremely disapointed

Do you have eepe installed on your PC? This program lets you edit models and simulate them on the PC. The AVR processor includes some "option fuses". One of these, if set, prevents the EEPROM from being erased when you flash new firmware. If not set, then every time you flash new firmware you will g...
by MikeB
Sun Aug 20, 2017 3:39 pm
Forum: ersky9x
Topic: Script Language
Replies: 27
Views: 1379

Re: Script Language

I've posted "e3". This supports multiple scripts running. The script.pdf file on the first post is updated.
Also supported is an elseif option like:

if <expression>
<statement>
. . .
elseif <expression>
. . .
elseif <expression>
. . .
else
<statement>
. . .
end

Mike.
by MikeB
Sun Aug 20, 2017 10:02 am
Forum: ersky9x
Topic: ERSKY9x Questions
Replies: 1777
Views: 152637

Re: ERSKY9x Questions

I'll get the 0.5 sec option added to eepskye. Originally I only had 1 and 2, the 0.5 was a later addition. To avoid changing the EEPROM values, an so avoid existing settings needing to be changed, I tagged it on the end. I'll need to add some code to get these to display in order, but still keep the...
by MikeB
Sat Aug 19, 2017 8:13 pm
Forum: Software
Topic: Flashed Er9x - extremely disapointed
Replies: 14
Views: 209

Re: Flashed Er9x - extremely disapointed

I was going to refer him to the WIKI, but noticed the problem before I did so. I contacted Rob, as I thought he needed to know something had happened, and he sorted the WIKI.

Mike.
by MikeB
Sat Aug 19, 2017 5:53 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 429
Views: 35176

Re: Orange Module running MULTI protocol

External module is the module bay. Internal module is the in-built XJT for FrSky radios, or the internal connections for SKY/AR9X/9XR-PRO/9Xtreme. The PDI sketch should flash the LED after it has run, slowly (once per second) if the PDI flashing worked OK, fast (5 times per second) if the PDI flashi...
by MikeB
Sat Aug 19, 2017 3:08 pm
Forum: Software
Topic: Flashed Er9x - extremely disapointed
Replies: 14
Views: 209

Re: Flashed Er9x - extremely disapointed

Did you look at the WIKI on this forum? 1) There have been many tutorials in many places. I needed to put the release versions of the firmware somewhere, which is where www.er9x.com comes in. I'll look to add a link to the source code on Github, ( https://github.com/MikeBland/mbtx ) where there are ...
by MikeB
Fri Aug 18, 2017 10:27 pm
Forum: ersky9xr
Topic: Manual calibration for 6POS switch?
Replies: 14
Views: 212

Re: Manual calibration for 6POS switch?

I've put a note on the first post of that thread to look 9 posts down!

Mike.
by MikeB
Fri Aug 18, 2017 9:23 pm
Forum: ersky9xr
Topic: Manual calibration for 6POS switch?
Replies: 14
Views: 212

Re: Manual calibration for 6POS switch?

Yes, if you move the connection from the 4th position to the 3rd position, and leave the 4th position unconnected, then run the calibration it should all work.

Mike.
by MikeB
Fri Aug 18, 2017 5:27 pm
Forum: ersky9xr
Topic: Manual calibration for 6POS switch?
Replies: 14
Views: 212

Re: Manual calibration for 6POS switch?

The voltages from the 6-pos switch should be in an increasing or decreasing order. You show "0.00-1.07-1.66-1.48-1.77-3.3".
The 1.48 value is out of sequence. Can you change the connections so this swaps with the 1.66 value?

Mike.
by MikeB
Fri Aug 18, 2017 9:55 am
Forum: ersky9xr
Topic: Firmware upgrade problem 9XR-PRO
Replies: 2
Views: 84

Re: Firmware upgrade problem 9XR-PRO

You want the one for the 9XR-PRO. The file should be ersky9xr_rom.bin. On the version screen, the "MOD" should show "REVB-X". What revision are you upgrading from? If it is quite old, you may need to also put new voice files on the SD card. At some point I changed from numbered files to named files....
by MikeB
Fri Aug 18, 2017 9:50 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 575
Views: 48263

Re: Adding MAVLINK support

TELEMETRY - LOGGING, the 4th item is "DATA TIMEOUT(S)", which starts at 2.5(seconds).

Mike.
by MikeB
Thu Aug 17, 2017 4:03 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 429
Views: 35176

Re: Orange Module running MULTI protocol

I don't recognise that "GRN" connection, nor do I recognise the order of the connections shown on the Pro Mini connecting to the UNO. My Pro Minis have the same connections as the one in your picture. Connect the RESET from the UNO to DTR. For info, the bootloader in the Pro Mini runs for a short ti...
by MikeB
Thu Aug 17, 2017 3:49 pm
Forum: General help (FrSky Taranis radio)
Topic: How to program
Replies: 17
Views: 304

Re: How to program

This thread details one way to get 5 on-off outputs from a single channel:
viewtopic.php?f=5&t=4611.

Mike.
by MikeB
Thu Aug 17, 2017 10:19 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 575
Views: 48263

Re: Adding MAVLINK support

The data blinking indicates telemetry data hasn't arrived for a while.
What revision of ersky9x are you running?
On recent test versions I've added individual timeouts on telemetry data, together with an option to extend the timeout.

Mike.
by MikeB
Thu Aug 17, 2017 10:14 am
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 429
Views: 35176

Re: Orange Module running MULTI protocol

I did use the "RAW" input for the 3.3V from the module. This feeds the 'Mini's 5V regulator (allowing 9-10V as the supply), so you get a small voltage drop through that. Using VCC should work OK, you just avoid that voltage drop. I used the "RAW" input so if I made a mistake and connected a higher v...
by MikeB
Tue Aug 15, 2017 5:55 pm
Forum: ersky9x
Topic: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?
Replies: 40
Views: 618

Re: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?

The 9Xtreme does have a full SPort in hardware, so it is just a case of connecting to the module bay pins (carefully, power and ground need to swap over). Maintenance mode supports SPort firmware updating. I does seem odd it shuts down after 5 seconds, is that the XSR or the FC? Everything seems to ...
by MikeB
Tue Aug 15, 2017 1:46 pm
Forum: ersky9x
Topic: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?
Replies: 40
Views: 618

Re: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?

Also useful to put files into a .zip file for posting! (Right click on the file and select "send to" in windows). I've had a look at that log file and about a third of the way through, SPort sensor data stops appearing, just the "normal" RxV and RSSI are present. So it does seem the Rx stops seeing ...
by MikeB
Tue Aug 15, 2017 1:43 pm
Forum: Turnigy 9XR PRO radio
Topic: binding problem
Replies: 55
Views: 1498

Re: binding problem

"Exp" indicates you have the trim adjustment set to Exp(onential). This means as you hold a trim switch active, the trim movement moves faster the longer you hold the trim switch, You may wish to change this setting to Fne (Fine). "Ttm" (Throttle Trim) indicates you have throttle trim enabled. This ...
by MikeB
Tue Aug 15, 2017 8:51 am
Forum: ersky9x
Topic: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?
Replies: 40
Views: 618

Re: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?

In that case, please repeat the "raw logging" test, while watching the logging display and don't stop the logging until at least 10 seconds after the tick marks disappear.

Mike.
by MikeB
Tue Aug 15, 2017 8:47 am
Forum: General help (FrSky Taranis radio)
Topic: I can't bind my xsr to taranis plus
Replies: 3
Views: 89

Re: I can't bind my xsr to taranis plus

How many different receiver numbers have you tried? If not already tried, test with 1 through to 10.

Mike.
by MikeB
Tue Aug 15, 2017 8:03 am
Forum: Turnigy 9XR PRO radio
Topic: binding problem
Replies: 55
Views: 1498

Re: binding problem

Just a confirmation check, if you are not seeing the "PPM Drive" option, make sure you are setting the protocol for the EXTERNAL module.

Also, you say you updated to r221. This must be one of the "test" versions. Please confirm you flashed ersky9xr_rom.bin (note the 'r' after the 9x).

Mike.
by MikeB
Mon Aug 14, 2017 10:58 pm
Forum: ersky9x
Topic: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?
Replies: 40
Views: 618

Re: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?

No, stay with ersky9x9XT_rom.bin, I forgot you have the 9Xtreme.

It does seem to be something to do with the F4 then.
Do the ticks ever come back?

Mike.
by MikeB
Mon Aug 14, 2017 9:55 pm
Forum: Turnigy 9XR PRO radio
Topic: binding problem
Replies: 55
Views: 1498

Re: binding problem

When you select PPM in the protocol menu, another option that appears is "PPM Drive". Make sure this is set to "FullDrive".

Mike.
by MikeB
Mon Aug 14, 2017 9:53 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 21
Views: 235

Re: Another two modules thread. 2.0

The STM version of the Multi module outputs a logic level (3.3V) signal for the telemetry. This is perfectly OK to be connected directly to the COM2 input on the 9Xtreme. Note that this input on the 9Xtreme is non-inverting, so the module needs to be configured with firmware that outputs non-inverte...
by MikeB
Mon Aug 14, 2017 9:48 pm
Forum: Hardware
Topic: S.Port output on a Q X7 radio?
Replies: 31
Views: 1798

Re: S.Port output on a Q X7 radio?

I only have an early QX7, so I can't test the smart port in the base. As a result, I haven't implemented using it in ersky9x, it only uses the module bay pins.

Mike.
by MikeB
Mon Aug 14, 2017 9:46 pm
Forum: ersky9x
Topic: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?
Replies: 40
Views: 618

Re: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?

The raw data log shows FasV data being received with a value of either 12.0v or 12.1v. Please try the following: 1. Use eepskye and back up both the flash and EEPROM of your radio. If necessary, you can revert to these. 2. Go to http://openrcforums.com/forum/viewtopic.php?f=7&t=4676 , and download "...
by MikeB
Mon Aug 14, 2017 6:07 pm
Forum: Hardware
Topic: S.Port output on a Q X7 radio?
Replies: 31
Views: 1798

Re: S.Port output on a Q X7 radio?

My understanding of openTx 2.2 is: If the pins are in the smart port on the bottom, then use that, and the module bay pins do NOT work. If the pins are missing from the smart port on the bottom, then you must use the module bay pins. The firmware can detect the build standard of the board (reads one...
by MikeB
Mon Aug 14, 2017 6:01 pm
Forum: ersky9x
Topic: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?
Replies: 40
Views: 618

Re: 9xtreme telemetry XSR + Omnibus F4 PRO v3 Bad Data?

I've had a quick look and the raw telemetry data looks OK, it should get decoded correctly.
The telemetry item "BATT" is the transmitter battery, is this the value that shows 12.4v?

What revision of ersky9x do you have on the radio?

Mike.
by MikeB
Mon Aug 14, 2017 5:38 pm
Forum: Hardware Mods
Topic: Push buttons / Encoder
Replies: 13
Views: 219

Re: Push buttons / Encoder

You could also try:
CH05: +46% 6POS Offset(-54%)
+108% HALF Switch(THR)

This gives you 12 reasonable spaced positions for channel 5.

Mike.
by MikeB
Mon Aug 14, 2017 2:59 pm
Forum: Turnigy 9XR radio
Topic: 9XR stopped talking to my AVRISPmkII after uploading firmware
Replies: 5
Views: 91

Re: 9XR stopped talking to my AVRISPmkII after uploading firmware

You need to look at the versions of companion and openTx you are using. I think this is indication you copy of companion is more recent than your copy of openTx. I don't use them (I use er9x/eepe), so I'm not certain.

Mike.

Go to advanced search