openrcforums

I have downloaded that and all good back to being able to arm motors.

Something wonderful has to be said about this open source system, you wouldn't get this sort of attention anywhere else, hats of to the developers and more money coming their way.

David

Yes but how? are you sending me a file or will it be in companion?

David

Sorry Taranis 'B' version

David

In order to arm the motors on my MC I must move both radio sticks to either bottom outside or bottom centre, from there I can apply thrust for take off, the FC is a SuperX and has worked without issue right up to version 2.0.08. Yesterday thinking all the issues with 2.0.10 were resolved so I upgrad...

Thanks Scott you really are a Taranis treasure

david

I am hoping somebody with good knowledge could have ago at changing this image to suit Taranis, I have tried but don't see it as being as good as others.

David

Model and splash screen for Xaircraft X650

David

NO! you load that file into the S.Port.exe then hit download when the device is found

David

Actually before I nod off companion actually writes a large file to the registry and it doesn't clean up after itself when using the provided un-install

Okay removed registry data for STM32 and FrSKY Taranis Mass Storage device 2 entries for each oem270.inf was for STM32 and there were half a dozen or so .inf files, And a few for the mass storage device, so the system should be clean if I want to re-install companion on the desktop, at present the l...

I have tried 5 different USB ports, on my laptop when the radio is off and attached the STM32 driver is in device manager, when the radio is on and attached the drives appear in computer and no drive is visible in device manager USB. On the desktop however when the radio is on and attached we have t...

Sure here, I have two options 1: I can recover the full disk as a backup was done yesterday 2: I also have companion installed on a Lenovo laptop it is version 1.51 and works So I can use that and not use the desktop, still happy to find out the issue in the event it happens with somebody else. Davi...

Yes on both counts

I get the USB connection sound but no disks in 'computer'

David

I'm not sure it is that Here I have the radio on and plugged into the PC I have pressed the button Read EEPROM from TX and get this message Capturegreen.JPG Device manager shows this Capture4.JPG I would not have run Zadig again except I was trying to write a configuration bin file to the SD card on...

I have up dated to the latest companion but find I have a problem, I read elsewhere that I needed to run Zadig again to get connectivity to the radio, I did that but the problem exists! With the radio off but plugged into my Windows 7 desktop I run zadig list all options find the STM32 Bootloader bu...

Daniel this is really for programming, you are best to take those basic questions to here http://www.rcgroups.com/forums/showthread.php?t=1914834

Read the manual and watch the videos then come back here

David

I said 100% ch7, ch7 is the source. It acts as a hold as when the 2nd line is off ch7 is then ordered to be itself. But yes a GVAR is the way to do it if you want it to be stored on power off, so you're all good! Envoyé de mon GT-I9505 en utilisant Tapatalk In reflection I have applied your solutio...

I said 100% ch7, ch7 is the source. It acts as a hold as when the 2nd line is off ch7 is then ordered to be itself. But yes a GVAR is the way to do it if you want it to be stored on power off, so you're all good! Envoyé de mon GT-I9505 en utilisant Tapatalk Thank you that is a solution and by makin...

If you saw the image you would see I have it on 1 line, putting it on 2 lines, I can't just place a 100% on CH07 I have to place a source, on line 2 I can place S1 and the switch SB- but in the simulator S! is still active in the off position and SB- I might have to wait until you can see what I am ...

Yes as per ch07

Sorry for being simplistic but learning the system: :? I need some assistance I am using S1 to increase/decrease gains but I don't want to accidentally alter this when flying, so implemented that S1 is only active when SB- What I find is that after adjusting gains and then turning SB- off the settin...

I have had a similar issue, when using SBUS to connect to my XAircraft SuperX FC I loose the no pulse feature, connecting back using all the servos leads I have it, I did not know up until now if it was radio or FC or both. My work around was in Taranis to set a custom fail safe that activated a RTH...

Got it! thanks for the insight

David

Sbus on the X8R always outputs all 16 channels at all times, there's no "sbus mode". Servo plugs either output channels 1-8 or 9-16, depending on the jumper configuration used when binding the receiver (it's all described in the X8R's manual). Well yes I can and did read, but it goes no w...

Many thanks for that

David

Happy New Year! I want to use the SBUS feature of X8R my FC is a XAircraft Super X and it supports SBUS on FUTABA and I read X8R is FUTABA compatible. So before I connect it I am looking for some expert advice as to what I have missed, firstly my Frsky Taranis is all set up with the 7 cables from FC...