Search found 44 matches

by petaca
Sun May 14, 2017 12:28 pm
Forum: FrSky Taranis radio
Topic: TARANIS + FVAS-02H + FAS-40 + D8R XP + GPS V2 (S.PORT)
Replies: 5
Views: 5399

Re: TARANIS + FVAS-02H + FAS-40 + D8R XP + GPS V2 (S.PORT)

Someone might have developed an arduino bridge but I'm not sure anymore, haven't used D stuff for years. Me! See: https://github.com/MikeBland/SportToHub for the source code. Specific thread: http://openrcforums.com/forum/viewtopic.php?f=84&t=6803&hilit=sporttohub . Mike. Thanks, Mike! I ha...
by petaca
Sat May 13, 2017 12:13 pm
Forum: FrSky Taranis radio
Topic: TARANIS + FVAS-02H + FAS-40 + D8R XP + GPS V2 (S.PORT)
Replies: 5
Views: 5399

TARANIS + FVAS-02H + FAS-40 + D8R XP + GPS V2 (S.PORT)

For the experienced: I have a FVAS-02H Variometer connected to an FAS-40 (via the Data In port). And these sensors connected to a D8R-XP receiver. Everything works perfectly on my Taranis Plus display .... However, when I connect a GPS sensor (V2) to the Smart Port of the FVAS-02H .... TARANIS DOES ...
by petaca
Tue Mar 07, 2017 3:15 pm
Forum: openTx
Topic: OpenTX 2.1 telemetry system preview
Replies: 283
Views: 317547

Correct amp and voltage measurement errors

Thanks bob
Suggest that there is no solution for my problem in Opentx 2.1.9?
If possible, I would like to fix it with the new firmware ....
by petaca
Tue Mar 07, 2017 2:31 pm
Forum: openTx
Topic: OpenTX 2.1 telemetry system preview
Replies: 283
Views: 317547

Correct amp and voltage measurement errors

friends How can I correct ampere and voltage measurement errors in Opentx 2.1.9 with Tarantis Plus? When the actual consumption is 1.7 Amp (measured with instrument) my Tarantis indicates a consumption of 1.3 Amp .... I can not find the menu with the scales that had my old 9xr pro .. (they have anot...
by petaca
Fri Feb 17, 2017 8:31 pm
Forum: FrSky Taranis radio
Topic: Telemetry using variometer and FAS-100
Replies: 14
Views: 9159

FRsky FAS-40 Sensors and calibration

friends
It is possible to correct errors of reading of tension and consumption with my 9xr pro (firmware v.220)?
thank you very much
by petaca
Fri Feb 17, 2017 5:58 pm
Forum: FrSky Taranis radio
Topic: Telemetry using variometer and FAS-100
Replies: 14
Views: 9159

Re: Telemetry using variometer and FAS-100

I apologize for your time.
The problem was an error in the connection of the fas40 ..... (battery and speed were in the reverse).
Everything works fine now!
Thank you very much for your time
by petaca
Fri Feb 17, 2017 4:51 pm
Forum: FrSky Taranis radio
Topic: Telemetry using variometer and FAS-100
Replies: 14
Views: 9159

Re: Telemetry using variometer and FAS-100

Thank you! I see FasV: 11.2v But does not indicate any value in Amperes and Accumulated Consumption ... The display reads: Amps 0.0 A Mah 0 #Note: My connection Fas40 and variometer (Data In) is as follows: fas40 tx out with Rx (yellow Data In cable of the variometer) # Note 2: Data In variometer ha...
by petaca
Fri Feb 17, 2017 12:08 pm
Forum: FrSky Taranis radio
Topic: Telemetry using variometer and FAS-100
Replies: 14
Views: 9159

Re: Telemetry using variometer and FAS-100

friends I wanted to know if I can get amperage telemetry on the screen (instantaneous and accumulated consumption) and Variometer. Both measurements ... My team is: * 9xr pro transmitter (firmwre version 220) * D8R XP Plus FRSKY Receiver * High-Pressure Variometer FRSKY * FAS-40 Ammeter FRSKY * NOTE...
by petaca
Wed Feb 15, 2017 9:26 pm
Forum: FrSky Taranis radio
Topic: Telemetry using variometer and FAS-100
Replies: 14
Views: 9159

Re: Telemetry using variometer and FAS-100

For the experienced: I have a 9xr pro transmitter, a high precision frsky variometer and a Fs-40 Frsky ,,,, I have the variometer connected and working correctly to my RX D8R-XP .... but I can not see the ammeter on the screen ... I have two questions: 1) How exactly is the FAS.40 (via the variomete...
by petaca
Thu Feb 25, 2016 10:28 pm
Forum: Turnigy 9XR PRO radio
Topic: Voice files for 9XR-PRO with ersky9x
Replies: 84
Views: 126646

Re: Voice files for 9XR-PRO with ersky9x

ReSt wrote:You can name flight modes 1-6 (with 6 characters max) and these names are displayed in normal size between the Tx battery voltage and timer1 when the corresponding flight mode is active

Reinhard
Thank you...

Could you tell me in which messages menu on the screen are written?

thanks again
by petaca
Wed Feb 24, 2016 12:34 pm
Forum: Turnigy 9XR PRO radio
Topic: Voice files for 9XR-PRO with ersky9x
Replies: 84
Views: 126646

Re: Voice files for 9XR-PRO with ersky9x

Thank you!! Not even managed to enter the ATV point in the correct range for switching the 6 positions of flight (I keep trying with values and curves) ** FLIGHT MODE DISPLAY: After setting flight modes as you suggested in the previous message may appear on the screen in large letters the six modes ...
by petaca
Tue Feb 23, 2016 10:27 pm
Forum: Turnigy 9XR PRO radio
Topic: Voice files for 9XR-PRO with ersky9x
Replies: 84
Views: 126646

Re: Voice files for 9XR-PRO with ersky9x

Thanks for the help. The display 6/14 LIMITS ... CHANEL 5 ATV: 1118 POSITION = "STABLE" 1323 POSITION = "loiter" 1741 POSITION = "RTL" 1404 POSITION = "ALTITUDE HOLD" 1608 POSITION = "ALTITUDE HOLD" (repeated) 2012 POSITION= "AUTO" I want t...
by petaca
Tue Feb 23, 2016 9:15 pm
Forum: Turnigy 9XR PRO radio
Topic: Voice files for 9XR-PRO with ersky9x
Replies: 84
Views: 126646

Re: Voice files for 9XR-PRO with ersky9x

OK thanks! I try to explain better. My team is 9XR pro-R212 with esky9x version V.4 make I would like to set up my tx to announce voice and display each of the modes Flight my DRONE (Loiter, hold altitude, etc). These modes are activated flights in six different parts of the ATV channel 5 on my radi...
by petaca
Tue Feb 23, 2016 2:35 pm
Forum: ersky9xr
Topic: 9XR pro- positions Link ATM channel voice messages and screen ....
Replies: 2
Views: 2585

9XR pro- positions Link ATM channel voice messages and screen ....

For experts the forum: 1) I need to link the atm positions of the radio channel 5 to voice messages and screen. For example, when Channel 5 is in ATM position 956: once heard the voice "loiter" And to read on the screen in large letters, "loiter" Or, when Channel 5 is in the ATM ...
by petaca
Tue Feb 23, 2016 2:14 pm
Forum: Turnigy 9XR PRO radio
Topic: Voice files for 9XR-PRO with ersky9x
Replies: 84
Views: 126646

Re: Voice files for 9XR-PRO with ersky9x

For experts the forum: 1) I need to link the atm 6 positions of the radio channel 5 to 6 messages you. For example, when Channel 5 is in position 956: once heard the voice "loiter" Or, when Channel 5 is in the 1123 position, which is the voice mense "ALT HOLD". You can program th...
by petaca
Fri Apr 24, 2015 12:20 pm
Forum: er9x
Topic: Er9x test versions
Replies: 16
Views: 76086

Re: Er9x test versions

Dear Mike I have installed on my TX:   er9x-R811 Version: V1.532-Mike date 03.21.2014 mod: FRSKY - 128 I use EEPE program (version prior to 411). My question is: You may not copy EEPE in some pc setup menus of my radio? For example, after copying all my models on the pc, I find the saved copy menu s...
by petaca
Sat Mar 22, 2014 1:37 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

edited
a correction:
"Works with ANY current sensor connected to A1 (not necessary FAS100/40)!"
by petaca
Sat Mar 22, 2014 1:33 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

FANTASTIC! er9x can read accumulated consumption of the battery (mah) and instantaneous consumption (Amps). And best of all, it works with Quacky sensor curr ent connected to A1 (not necessary FAS100/40)! You should only be able to locate the negative cable and signal leaving the current sensor (del...
by petaca
Sat Mar 22, 2014 12:01 am
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Thank you very much Mike! Then, installing it ER9X-128 again. Then I'll enter the suggested values ​​.... Just to be sure. In my setup, "current source" must be related to A1 or SC1?   (remember that I have edited my SC1 and current sensor is connected to A1 channel) Prove it all tonight a...
by petaca
Fri Mar 21, 2014 11:21 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Mike: Sorry, forgot to google translate the above message! The question is: To set up: "I suggest setting A1 to type '-', this is the raw analog to digital value, the 195 and 248 values ​​above". I place "A1 Channel 195 -" (10/13) is that correct? thank you very much again
by petaca
Fri Mar 21, 2014 11:18 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Mike:

Para configurar:

"I suggest setting A1 to type '-', this is the raw analog to digital value, the 195 and 248 values above".

Debo colocar "A1 Channel 195-" (en 10/13)

es correcto?

muchas gracias, nuevamente
by petaca
Fri Mar 21, 2014 11:02 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Genial!
Knowing the actual instantaneous consumption (Amp), I can see on display the accumulated consumption of the battery (mah consumed)?
I must do something special for it?
Thank you very much MIke
by petaca
Fri Mar 21, 2014 9:08 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Thanks Mike ! I have done all the suggested procedure ( er9x was installed successfully EEPE - 128 . ) . I guess the scales are on page 13/13 ... As explained in the previous post , I have connected a current sensor in A1. My sensor indicates current consumption 2.52 v to zero ( 0 Amps ) and maximum...
by petaca
Fri Mar 21, 2014 1:36 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Mike thank you very much for answering!

The scale of amperage would be a very good addition to the er9x-FRSKY!
When you make changes to er9x where the public? (would be aware of this possibility)

I wanted to clarify that my radio is 9XR, working at 128.
regards

  translated by google
by petaca
Fri Mar 21, 2014 12:39 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

Thank you very much Mike ! ( as always). I was unable to calibrate the ammeter function well (which is what interests me ) , , , Maybe you are doing something wrong .... I have done the following: 1) I have placed in A1 the " A". and I have connected a current sensor in A1 ( only the negat...
by petaca
Wed Mar 19, 2014 11:41 pm
Forum: FRSky Telemetry Mods
Topic: FrSky FAS-100 Telemetry Amperage Sensor
Replies: 94
Views: 56548

Re: FrSky FAS-100 Telemetry Amperage Sensor

For experienced Site. I hope my question is understood. Many sensors amperage "inform" the amps consumed by a voltage (1-3 volts) and a software interprets a value as consumer ... For example: 1.33 volts = 12 amps current). The software also follows easily that information accumulated tota...
by petaca
Sat Mar 15, 2014 12:16 pm
Forum: FrSky Taranis radio
Topic: Using HK variometer as altimeter with Taranis
Replies: 22
Views: 12707

Re: Using HK variometer as altimeter with Taranis

Many thanks mike!
excellent work.
by petaca
Sat Mar 15, 2014 12:14 pm
Forum: Turnigy 9XR radio
Topic: "BAD EEPROM DATE" (after updating with er9x-frsky.hex)
Replies: 4
Views: 4318

Re: "BAD EEPROM DATE" (after updating with er9x-frsky.hex)

SOLVED. Dear friends. I want to clarify that my problem has been solved. I went back to install er9x-FRSKY ...., reappeared onscreen those posters ... (look normal after the update), but now you can edit models pc and burn my radio ...
regards

Go to advanced search