openrcforums

Many thanks,both of you,I have updated the Horus to 1.3.01,had 3 flights with it on a foamie electric glider,things seem OK.I have managed to update an X series receiver to LBT to work with the Taranis,easier than I thought.Problem left is updating my Taranis D & E to EU LBT,before I sell them,I...

Thanks for the reply,I can live with only using my X series and LR on my Horus ,which is EU- LBT ( I think),so I will have to flash the firmware in the receivers.The software in my Horus is 1.2.15,Frsky tell me it needs updating,to what issue,and will that be EU-LBT or is that separate for the RF mo...

Long story,but will keep it short.I have a TaranisD andTaranis E transmitters along with an assortment of receivers,mainly X series and LR series.I have purchased a Horus transmitter,with Frsky op software.I have come to bind the receivers,and only the LR types will bind.It has been suggested that m...

Many thanks,found it in settings,must be getting old,hey,I am old.

Bi

I have both a Taranis D and E .The D is on software 2.1.8 and the E is on 2.1.3.I want to transfer model memories and settings from the D to the E,using Companion on my PC.I have tried to do this,but bad eeprom prompt appears and I have lost all my model memories on the E.I have tried to upgrade the...

Having failed to connect my Taranis X9E to my PC and Companion 2.1 by using a USB connection,I purchased a Bluetooth dongle and pluged it into a spare USB port.Switched on my Taranis and I still get ' cannot find transmitter'

Any help would be appreciated,what,if anything,am I doing wrong

My Taranis E will not communicate with my PC at all.I have no problems with my other Taranis.My PC indicates that the usb device has malfunctioned,and the Companion software states that the transmitter cannot be found.For the moment I want to use the sopplied firmware in the X9E,but use Companion fo...

I have downloaded opentx2.1,but my PC still cannot find it.You have to have pianists fingers to hold the trims inwards,then press the on switch and then the enter button.The trim buttons are18cm appart! The Frsky man on the Frsky forum said that it was not possible to use Companion software (see my ...

I have just taken delivery of the new Taranis 9xe and have been informed that it is not compatable with my Companion software on my PC.If this is the case,what a letdown.I have model set-up data on my PC that I want to transfer to the new transmitter.Any ideas,please ?

Yes,it is disabled on one receiver

I am using 2 8xr receivers in a new model set-up.All is working OK,but no receiver voltage is shown on the main display.My other single receiver set-up does show the receiver voltage.

What have I not done ?

It is set to A1

I currently fly two models on my Taranis,both setups display the receiver voltage on the main screen (to the right of the transmitter voltage).I have set up two more models,both using the same type of receiver (X series),but the receiver voltage is not displayed.The set up seems to be the same for t...

Thank you for your help.The version that I am using is V1.0.01.It does have a vario source Alti and that has been selected.At least I now Know how to zero altitude.

The Taranis has ,I assume the stock firmware.I have used the transmitter and D8R 11 receiver together with no problems, in a glider.I had the old type variometer and sensor hub from another set up.I know that the receiver and sensor work together.I have purchased a X8R receiver along with the latest...

I have a D8R-11plus receiver, sensor hub and a FVAS-01 variometer.The transmitter is a Taranis.I thought that i had set it up correctly.but on the display all I get are a random selection of rolling numbers,both - and +.Can anyone explain how I set up the transmitter for this function,also how do I ...

I have the same problem.The led light up when setting the channels using the channel changer.When the decoder is connected to the receiver,no leds light up and no servos move.the Taranis is set to channels 1-16 and the SBUS decoder has been set to channels 9-12. HELP,please