openrcforums

Nice to be right about something. I must tell the wife its posible

Hi I eventually gave up as the configuration I wanted needed 3 transmitters to work. One tip I found that some mono or stereo plugs were not connecting properly and needed to go in the trainer socket far enough .check that you have continuity between the tracker and the internals of the tx. Good luc...

Any ideawhen is next release ?

Should I report this a bug on opentx github?

I reverted to 2.3.7 . I tried various models one newly madeon 2.3.7 all reset trying to access setup page 2

nightly 2.3.8N176 (82660985) works ok. with or with out SD card. I will revert to 2.3.7 and try other models

Hi, I will try nightlies ,The problem is still there with no sd card inserted , but will reformat SD card anyway.
How do i download nightlies?

Hi just checked my RTC battery its 186mv and radio thinks in 1970 .Could this be causing a problem ? with file dates being in the "future" .The radio setup page I can not access is the file listing page I have a battery on order but can't go to shops due to lock down.

After long press Menu to get to the radio setup page one, then I long press to get to the version page. I can then long press to step back through the setup pages until I try to access page 2 when the radio resets.

Hi just worked it out long press on setup page one then long press again . date incorrect as since upgrade RTC error on start up

How can I get to the setup hardware page ? When I press Page on setup page 1 the radio resets.
I tried with no sd card and the radio reports "no tools" and then resets when I press Page

Hi I've attached the pic you requested . after the radio resets there is a icon in the upper right corner of the screen SD card error is it sd card error?. I have checked the sd card for errors and re flashed the radio still the same problem

Hi I Upgraded my X9E to 2.3.7 (opentx-x9e-lua-noheli-sqt5font-en-2.3.7.bin) . I can access the first radio setup page (Long press Menu) but if I then press the page button to access the other setup pages the radio resets to the Model page. How do I flash back to 2.3.6? I have never had to revert bef...

I've wasted enough time on this so going for a simple solution. I'll use wireless buddy box between the x9d(mode2) and the T16 (mode1) with trainer set to additive mode so both sets of sticks are active all the time. Voice control as to who is twiddleing the sticks. Head tracking . plug headset into...

Hi, I've tried that and I cannot get the wireless link to work . On the 9xd when I set the external module to frskyrx the TX shows "Disable internal RF" in the Status line immediately below?

Hi , Im trying to set up a slope soaring fpv system. I'm an experienced sloper but a fpv novice and to stop it ending in disaster I'm trying to setup a head tracking and a buddy box system both working at the same time. The master is Jumper T16 opentx 2.3.5 with internal and external module both usi...

That fixed it.
Thanks for your prompt reply

Hi I have just purchased a Jumper T16 with hall sticks and internal module . I am familiar with opentx , I have a 9XD with an external multi protocol which works well. I have loaded opentx-t16-2.3.5 on to the T16 When trying to set up a model there is no "internal module" option. Using the...

Hi. Tbanks for the prompt reply. I did. ot mean the real time clock. But I found it my self
Long press enter wheel.
select statistics ,
press enter
long press enter
This resets tbe statistics which resets the "operation Time" displayed in the upper lcd screen of the 9xe

Hi, Is it posible to reset the "operation timer" in the upper display of a 9XE ? .Have searched all over but cannot find any mention of it.

yes obvious when its pointed out to you. A check if the data has changed since last the last write and that say 1 to 2 seconds has also passed should help considerably.
Thanks for the help

Hi, I have written a lua script that displays the models GPS location and also writes the last valid location to a text file. This is so that the location can be read in the field in the case of a lost model and entered into a smart phone geolocator app. This is particularly valid for slope soaring ...

Hi, I'm trying to write (copy, past from various sources) a lua script that displays the models location and also writes the last valid location to a txt file. This is so that the location can be read in the field in the case of a lost model and entered into a smart phone geolocator app. This is par...

Hi, I have a “Stinger” dynamic soaring plank that has an old v8 receiver embedded in hot melt glue in the nose. I do not think it would survive the surgery required to access the bind button . I have been flying it with a v8jt plugin transmitter module in my Taranis 9xd. I have recently purchased a ...

thanks again. Think I'm ready to upgrade now.

Thamks for the clarification

Ok Thanks for the info. Second question:- I use sound files to announce flight mode changes . For example I have a model called AIR_ONE, and in a folder called SOUNDS/en/AIR_ONE a wave file called Landing-ON.wav .This plays when LANDING flight mode is activated without using any functions or logical...

Hi , I'm in the process of moving from 2.1.,9 to 2.2 on a 9XE. As I have a number of Full house gliders on my TX going through them all to change all the Gvar and curve names would be a right pain. Does 2.2 just truncate the names to the first 3 letters? Are the names just there for reference and no...

Hi, I am in the process of updating my X9E from 2.1.9 to 2.2. While adding some of my custom sounds to the new voice pack I downloaded via Companion 2.2V0010 I noticed that some file names are longer than 6+3? for example in sounds/en/system celsius0.wav, celsius1.wav , degree0.wav , degree1.wav ,fo...

Just had a look at how change a display on a 9xd. Not easy. I think i will leave it alone. If it aint broke much dont fix it.
Thanks
Geoff