Hi,
this is possible but not very user friendly.
viewtopic.php?t=13150
An alternative is using telemetry from a flightcontroler with iNav. An old F3 10 dof is perfectly suited and cheap - if you can get one. Newer FC work also of course.
Search found 467 matches
- Sun Oct 01, 2023 3:21 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: Modify OpenXVario to Sailboat
- Replies: 2
- Views: 6049
- Thu Jun 01, 2023 4:53 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: PX4 airspeed sensor with openX
- Replies: 3
- Views: 2497
Re: PX4 airspeed sensor with openX
I'm not sure if anyone tested the latest changes in the code. You can try with an older version of the code. Please find attached an older version that should work with MS4525 if you do not have one yourself. Your config files seem OK to me.
- Thu Jun 01, 2023 9:27 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: PX4 airspeed sensor with openX
- Replies: 3
- Views: 2497
Re: PX4 airspeed sensor with openX
Did you try to swap the pressure connections on 4525D0? Negative airspeed data is not processed.
- Sun Apr 03, 2022 2:46 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Only one channel is active on X9D+ 2019 and Archer R4
- Replies: 2
- Views: 4096
Re: Only one channel is active on X9D+ 2019 and Archer R4
Did you check channel mapping in receiver options? FrSky has unusual defaults from time to time .....
- Sat May 29, 2021 10:57 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: New speed sensor: SDP3x
- Replies: 19
- Views: 14220
Re: New speed sensor: SDP3x
Please find attached an openXsensor folder. It should run with a FrSky S-Port RX and Arduino nano or pro mini. All features are disabled besides airspeed with SDP3X. Remember to add 4.7k pullup resistors to i2c lines. I decided to make my own breakout board for a better handling.
- Thu May 27, 2021 6:14 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: New speed sensor: SDP3x
- Replies: 19
- Views: 14220
Re: New speed sensor: SDP3x
Hi Tempo, not sure if you are still active with this project? If you are still around, do think it would be relatively straightforward to use the oXs_sdp3x.cpp code as the basis for coding a dedicated airspeed probe (using Arduino coding)? Of course I would welcome anyone else's comments on this to...
- Tue Mar 30, 2021 9:57 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ADC inputs for vcc measurement
- Replies: 2
- Views: 2732
Re: ADC inputs for vcc measurement
Here is an example how to transmit voltages measured with A3, A2, A1, A0 using the telemetry fields VFAS, Fuel, A3 and A4. There is only one VFAS slot available but you can use other fields to transmit voltages. Cells does not work because it transmits delta voltages in a packed field.
- Sun Mar 28, 2021 10:46 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: Help reading RPM
- Replies: 4
- Views: 3563
Re: Help reading RPM
Try to block RF with a small ceramic capacitor between D8 and GND. TX and RX (telemetry) RF are able to disturb the measurement.
- Sat Feb 20, 2021 12:44 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: New beta version of openXsensor (=openXvario)
- Replies: 541
- Views: 314900
Re: New beta version of openXsensor (=openXvario)
A4 and A5 (i2c bus) is OK for both. They are differentiated by the i2c adress.
- Tue Feb 02, 2021 10:00 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: openXsensor slimsize GPS Vario for DLG and F5J
- Replies: 47
- Views: 46363
Re: openXsensor slimsize GPS Vario for DLG and F5J
T1 = 4 (armed)
T2 = 1000 + number of satellites
https://github.com/iNavFlight/inav/blob ... lemetry.md
T2 = 1000 + number of satellites
https://github.com/iNavFlight/inav/blob ... lemetry.md
- Tue Feb 02, 2021 7:45 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: openXsensor slimsize GPS Vario for DLG and F5J
- Replies: 47
- Views: 46363
Re: openXsensor slimsize GPS Vario for DLG and F5J
Hi Is there any chance to get the information what had to be changed to get it running with Telemetry Viewer? What's the different in S.port information/protocol between Standard Frsky and this version. Regards Chris Hi, here is a complete sketch, ready to flash. T1 and T2 are manipulated to simula...
- Tue Feb 02, 2021 6:34 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: New beta version of openXsensor (=openXvario)
- Replies: 541
- Views: 314900
Re: New beta version of openXsensor (=openXvario)
Airspeed is not foreseen in hub-protocol. It should be possible to send airspeed using other fields like T1. But it is not prepared. It is eventually much easier to flash D-RX with D16 firmware: https://www.rcgroups.com/forums/showthread.php?3391195-FrSky-D16-firmware-for-D8-receivers&perpage=20...
- Thu Dec 31, 2020 12:50 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
Your MS5611 seems to be OK since your VSpd (not compensated) is calm. Your MS4525 airspeed data seems also OK. Running the attached V4.0 firmware should result in a similar compensated VSpd with low noise (+/-0.1m/s). To crosscheck again I can flash the sketch you used in your test and report back. ...
- Tue Dec 29, 2020 4:34 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
This is a logfile with V4 I've just made. SC is switching between not compensated (1) and compensated VSpd (-1). There is +/- 0.1m/s noise in compensated mode (when airspeed is about constant) and no noise in not compensated mode. Sensitivity was 60% and compensation 110% in this case. If you test w...
- Mon Dec 28, 2020 7:00 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
You are right. I've crosschecked with the 2016 version and compensated VSpd is indeed not useable. Now I remember I was using this version for glider performance measurement only. Then I've flashed back to 4.0 and everything worked as foreseen. Seems the newer versions are missing some filtering for...
- Thu Dec 24, 2020 2:58 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
Presumably you should test an older known working version now. Please find attached a 2016 oXs sketch which should work with your configuration out of the box. 2016 there was only one config file (config.h) but you will see a similar structure.
- Thu Dec 24, 2020 12:22 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
With the sensitivity dialed down to 20, airspeed fixed at 38kts with a syringe (but still fluctuating, might indicate a problem with the sensor), compensation at 82%, vspeed jumping between -0,4 and +0,4 m/s Hmm, there is something wrong, airspeed and VSpd should be stable in your setup, even with ...
- Thu Dec 24, 2020 10:08 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
At rest, no airspeed, I get readings between zero and roughly 6. This is pretty normal. Variation decreases exponential with increasing airspeed. Imo it is better to simulate airspeed inhouse with a static pressure applied to the dynamic port of the MS4525. Vspeed should be nearly deadcalm inhouse ...
- Wed Dec 23, 2020 1:59 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
It is actually not intended that way. #define VSPEED_SOURCE FIRST_BARO selects standard VSpeed from first physical baro sensor. MS5611 in your case. #define VSPEED_SOURCE AIRSPEED_COMPENSATED selects airspeed compensated VSpeed #define VSPEED_SOURCE PPM_SELECTION allows to switch between the two VSp...
- Wed Dec 23, 2020 6:00 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
This is strange. Airspeed data should not change at all if the vario data source is changed. Please upload your config files.
- Tue Dec 22, 2020 11:47 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
What I want to look into is sending out a telemetry value with the name "compensation" and send the exact value, so I can read it on my X10S radio directly. There are two different ways imo: Activate #define FILL_TEST_2_WITH_PPM_AIRSPEED_COMPENSATION and transmit TEST_2 in a T1/T2 field a...
- Tue Dec 22, 2020 9:25 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
oXs is able to send PWM (PPM) back in a telemetry field. T1 or T2 is a good choice. With a suitable offset and ratio OpenTX should show compensation % directly. On my side I was happy with the PWM value since I adjust compensation acoustically. But you are right, it is smarter to convert it in compe...
- Mon Dec 21, 2020 8:23 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: OpenXSensor vario configuration
- Replies: 25
- Views: 14296
Re: OpenXSensor vario configuration
Only these lines are needed for your purpose: #define AIRSPEED_RESET_AT_PPM 100 //send a pwm signal +100% to reset airspeed before start #define COMPENSATION_MIN_AT_PPM 60 #define COMPENSATION_MAX_AT_PPM 90 #define COMPENSATION_PPM_MIN 80 #define COMPENSATION_PPM_MAX 140 Compensation is adjusted wit...
- Sun Nov 22, 2020 6:29 am
- Forum: openTx
- Topic: Glider crow brake in flight mode - tricky difficulties with camber offset
- Replies: 2
- Views: 2772
Re: Glider crow brake in flight mode - tricky difficulties with camber offset
In order to avoid the rapid up and down, you can set the trigger point for the landing phase so that there is never an upward movement due to the switchover.
- Tue Oct 27, 2020 1:03 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: High(er) resolution current sensor
- Replies: 7
- Views: 7245
Re: High(er) resolution current sensor
Hi John Yes, third board is an Arduino pro mini 328 16MHz. It is also possible to use an Arduino Nano which has USB onboard with only a little weight and size penalty. Nano is preferable for beginners if size is negligible. If you are only looking for a 100A sensor without the need of 0.02A resoluti...
- Wed Oct 14, 2020 8:10 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: RPM resolution?
- Replies: 232
- Views: 146144
Re: RPM resolution?
A 100pF ceramic cap connected to (D)8 and GND solved a similar issue for me. Interference was presumably caused by RX telemetry. OpenTX filtering should not be neccessary imo.
- Sat Sep 12, 2020 8:07 am
- Forum: General help (FrSky Taranis radio)
- Topic: Frsky R8 PRO receiver AIN2 port not working?
- Replies: 14
- Views: 13561
Re: Frsky R8 PRO receiver AIN2 port not working?
There is an (useless) A2 voltage in telemetry, but FrSky RX8Rpro have no AIN2 port at all. Where did you connect FBVS-01?
- Wed Jun 17, 2020 8:23 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: two current sensors on one arduino
- Replies: 4
- Views: 3954
Re: two current sensors on one arduino
Indeed there is only one slot for current data. But a few for voltage. A workaround is to scale and transmit the voltage output of a 2nd current sensor and change unit and name in OpenTX later.
- Wed May 20, 2020 4:31 am
- Forum: openTx model setup
- Topic: Using Vario Alt for rate (ascend/descend per minute) announcements
- Replies: 7
- Views: 9303
Re: Using Vario Alt for rate (ascend/descend per minute) announcements
I consider the following approach: - Setup a calculated sensor from the (Alt) telemetry value. A calculated value (called "Rate") of type "distance" in meters. - Setup a timer, that triggers every minute (for one second). - Setup a function on the start of that timer edge to pla...
- Tue Apr 07, 2020 10:16 am
- Forum: FRSky Horus radio
- Topic: Mainboard defect in S-Port update
- Replies: 4
- Views: 7563
Re: Mainboard defect in S-Port update
Don't worry. It is nearly impossible to damage a iXJT in this context.