openrcforums

[BBvideo 425,350]https://www.youtube.com/watch?v=LRoJps6HbII[/BBvideo]

Its alive! woohoo!

lol it would appear yahoo email addresses don't work to you. Lets see if gmail works.

awesome I do appreciate the extra support. I did however nearly buy a taranis last week .. lol
Will contact you through there.
thanks

as far as I could see it was un-used when I bought it but obviously you can never be sure

sorry bought it off rcgroups for sale thread 2nd hand So maybe that's why it was for sale in the first place

thanks very much for this. Ok the key marked on the header 'box' is what I missed before so have that round the right way now (however I have tried it the wrong way previously so will have to work out if that broke anything) The cable that came with the USBASP has 2 'ends' (have never used the 2nd e...

any other hints on what I have stuffed up here?

yep soldered in programming port and usbasp
Can see it in my previous post Here

Is there a tool other than the one in the first post I can try that gives a more descriptive error to try and work out what I've done wrong ?

found myself a gui app to see if it gives me any more descriptive errors ... and it didnt really(see attached pic) .... hmmm

anyone got a quick link to instructions for flashing the TelemetrEZ board?

sorry was not at my pc before .... stepping through it right now: 1. Attach usbasp ribbon cable to header on the tEZ (honestly I dont know which way it goes. I aligned the red edge of the ribbon cable AWAY from the arrow on the tEZ header. (see pics)) 2. Run t1634programmer. It sits waiting saying &...

Flashes er9x and open tx fine. Probly done it about a dozen times in the last few weeks
Is there another way to flash the tEZ that would give more error feedback ?

I run the tool. It says waiting for usbasp or whatever. Plug it in (with the tEZ plugged in and it gives the same error as it does when the tEZ isnt connected to it.
Does that make sense ?

Nope I tried the automated too that does it when u plug it in and it detects the usbasp but not the telemetrez

nope disconnected it when i switched to battery power.

Yer thats what I was thinking. Ok next testing to see if the tez is working. Suggestions ?

just tried it with frsky plugged back in with both orientations of the TX-RX plugs and also with the TEZ>r89 on and off.
No difference.

Oh wait ive been doing these test also with the frsky unplugged assuming I would just get zero values but still work.....
Pics

Ok kool thanks for all this guys.
Just tried on Battery with er9x-frsky that MikeB link and no change to before.
So I am thinking I need to work out if the telemetrez is functioning and see if i can update the firmware on it.

ok tried the frsky version in that zip file.
Has an option in the hardware section called telemetrez>r89.
tried it in the off and on position. No difference.
I have been doing all these testa with it powered by the usbasp (not on battery) will that make any difference?

just tried erx9-frsky . .. no difference. where is the setting to change the baud rate?

just tried it ... no difference to the telemetrez version

so installed it and its not working. Installed OpenTX vanilla, checked all switches work fine. Installed OpenTX telemetrez version, plugged tEZ back in and throttle and aileron switch not responding. So I gather that is an indication the TelemetrEZ board is either not functioning or not wired correc...

Awesome. Yer I gathered a SP board would solve any issue. Good to know it won't hurt things so I will give it a try. Thanks

Easy question from a newb. About to install TelemetrEZ. Have programming port soldered on MOSI and MISO pads.
Will having the TelemetrEZ wires soldered on there as well cause and issues when flashing the 9x firmware ?

yer not sure on the exact values of the original i just went with what people recomended.
got er9x wokring great and just did my 2nd programming cable and er9x install on the weekend. Another happy customer .. lol

super awesome thats got it .... i have a dual receiver setup and needed to be able to switch between them.
Only flashed it in the last 2 weeks so pretty recent firmware
next job .... check out these fandangled speaker mods.

ok I am 100% sure I am missing some very simple bit of information.
I just want a switch to work like a gear switch eg on and off.
have looked through the er9x guide and thats the only thing i havent been able to work out.
please put me out of my misery