openrcforums

Hi guys just for info. I have fitted the new M9 gimbals to my radio and no longer need dead space. Throttle track is so precise and has to be forced to move left or right. I'm well pleased this is just a bonus on top of superb gimbals.
Thanks for all the suggestions and comments. Kevin.

thanks for suggestions guys,I had tried a new model and checked the subtrim but the problem persisted, decided to try one last calibration.Guess what saw the stick suddenly centre on the calibration screen. The only thing I did differently was to move the sticks separately one at a time rather than ...

Now this is really weird I've refitted the original gimbals and they are showing exactly the same problem even after calibrating. Certainly wasn't like this before. Sod's law sold my spare Taranis last week having never used it in 2 years.

Wonder is this a problem with my X9D. I have just fitted the new M9 gimbals to my Taranis and calibrated them, Im using mode 2 and the right stick is perfect with the channel monitor showing everything as near zero as not to matter. However the left stick is showing 20% right trim on the rudder, Ive...

Sorry guys been ill for last few days everything appears normal with the output screen the only thing it reveals is that i probably need a dead area of around 15% either side o f centre.

Thanks guys I have a friend who is a whizz with RC electronics. Over to him.

Sorry guys been ill for last few days, kalle is 2.19 likely to make that much difference from 2.017? Bob mysteriously ​it lost bind on one occasion but instantly rebound. Kilrah, sorry a better explanation, after moving all the components the receiver still controls all the servos but the lipo senso...

Guess there's no answer to this one, looks like I'll be reflashing back to pre 2.00 version has anyone encountered problems doing this? Thanks Kevin.

My apologies for not being specific, the stick control of the rudder remains exactly the same even with 100% expo or the Scott Page mixes detailed, the slightest deviation from centre when applying throttle causes the quad to move in whichever way the stick has moved slightly. Having suffered 3 stro...

actually it an original Taranis x9d not the plus updated to opentx2.017. obviously ive got something badly wrong having turned up expo on the rudder to 100% and nothing happoens

OK guys a little help please. i recently moved my x8r receiver together with lipo sensor and high precesion vario to another model and now nothing works, im pretty sure everything was working beforehand. the only thing i can presume is that updating the radio to open tx 2.017 has something to do wit...

hi Guys I doubt this thread is still active but if it still is can anyone point me to the Scott Page item detailed above, i just can't make this work on my quad which is darting everywhere whenever i apply throttle. Thanks in anticipation, Kevin

Has anyone yet found a source for the micro jst 1mm 3 pin cables as used on the vd5m? I have searched everywhere, problem is searches return hundreds of 2,4,6 pin and generally 1.25mm or 2.0 mm. Kevin.

Was this ever sorted? I have exactly the same problem but mine is also happening with a VD5M receiver which is an even bigger pain to re_bind due to cables that need to be removed to fit the bind cable. Kevin

Thanks Kilrah. You were correct one of the components was wrong.module is now binding perfectly to both DSM 2 & DSMX. Kevin

Kilrah, I've tried binding from the menu( selecting dsm2 and then bind but nothing happens ) with no indictor diode's is their any way of knowing if bind signal is being transmitted?

Hi guys, hope you can help I've built a spectrum module for my Taranis using a djt module case from T9. Everything appears to work perfectly But, I need to be able to use the momentary switch to bind in the same way the trainer switch was used on the DX5. Is this possible or do I need a different so...

Thanks Kilrah & Mike B. I can't believe I've wasted another day for no reason other than my comp telling me updates are available. Perhaps its time to stop spitting my dummy out and just go fly, its another beautiful day up here in the North unlike the terrible weather the rest of British seems ...

Right thats it !!! I've had it with this Taranis S#*T does anyone want to buy or swap a taranis for another reasonable transmitter prefer Hitec. Ive spent 5 hrs now trying to get round the DFU error i have exactly the same problem as soulflyer (last entry previous page). Done everything detailed on ...

Geoff, all I remember is, when I changed from a previous model the calibration screen came up on the transmitter never thought anything of it and just hit exit which returned me the correct model. Guess I should have checked.

Ditto show master I have a phoenix 2000 from HK with pre-fitted servo's but I'm about to remove them and use 2 for the flaps after testing. I usually soak test for 15 mins, maybe I should up it to 30 min!

Sorted, sticks needed re-calibrating.
Thanks everyone for your suggestions.

Servos all working OK, curiously I swapped the aileron connectors and the problem remains on the left aileron as if nothing had been changed.

I was flying my AXN after setting up a new model on my Taranis. As soon as I launched I realised control was extremely erratic, eventually I cut the throttle and the model came down about 1km away luckily with only slight damage. On checking I found the right aileron movement was fine ,giving full m...

Sorted thanks all. Kilrah you were spot on found the problem last night after watching a Scott Page video. I feel a right Muppet, did'nt realise trims could be turned off in the mixer. I still don't know how it happened I just know I never been aware of deliberately switching it off.

Thanks Bill, tried it, BUT exactly the same on a new model set up.
Anyone else? Kevin

Recently whilst flying my AXN I found I had no rudder trim. Checking later I find that all the sound and screen indicators show that the trim is moving but nothing is happening. I'm using a V8r II receiver and a simple TREA set up. I've swapped the servo to a new unit still no movement, however, whe...

The transmitter won't switch off but still appears to work properly when switched on. Umm... Care to expand on that statement, as it doesn't make too much sense when I read it. With the main on/off switch in the 'on' position, all the menus work as far as I can tell. I assume it will transmit but w...

hi Scott I've just watched your short video I'm having the same problem and right at the end you change from D16 mode to D8 mode, yet everyone is saying bind in D16. Please help I've had this transmitter 3 weeks and haven't managed to bind it to anything yet ( X8R & V8R4-II)! Its moving with gre...