openrcforums

Why do you think that Temperature is not any more sent? Maybe I was expecting the MS5611 temperature available to be sent as in former versions. I never gave much attention to the MS5611 temperature accuracy, but always thought that having that reading was fun. And with the multiply/divide/offset f...

Hi My applause and thanks to all the ones involved in this project and that shared their work. This is my first openXsensor with air speed reading using the 4525DO from HK: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=62752 I'm getting readings in Alt, Vspd and Spd as can be seen h...

Glad you found a way arround, João. Now back to the main subject. Hi software masters. I found some portuguese Taranis voices using the companion9x here: http://downloads.open-tx.org/voices/opentx-taranis/pt/ . They are arranged somewhat different from the english version. Should I make my brazilian...

João

Yes it is.
It seems you are having trouble making it work.
May be this can help you:

This is what I did using this recipe https://www.youtube.com/watch?v=pi_KAbgJ3vE
At least jhsa can comment
Cheers

João

jhsa wrote:Well in Portugal we also say "Duzentos E cinquenta e seis" for 256. For us that is correct Joao

yha. I thought you would confirm what I was saying, glad to know they still speak the same language

jhsa wrote:... try to get the acapela ones.. those are good.

Rob Thomson wrote:Lol. You going to buy them

jhsa wrote:I thought you could use them from their demo page.. then forget what I said

I suggest you use this for acapela demo, I did, it works
https://www.youtube.com/watch?v=pi_KAbgJ3vE

Sorry if I'm bringing a possible issue in the wrong place. I'm trying to make a portuguese (brazilian accent) version of the present voice pack taking the english version as a guide. I started with the numbers because my first interest is altitude info. One problem is that in portuguese we say: exam...

Success ! At least 80% success. The MS5611 is talking to the FrSky 2 way receiver, the FLD02 is showing the altitude ( in meters, no cm), is also showing the vario rate in centimeters in field T2 (limited to -20, to +999, because... FrSky did so, yet to discover why), and the arduino beeper is beepi...

Hi rainer Thanks for the quick response. Shall have a deep look at the oXv. Found a work arround: choose this: 10 #define PPM_AllwaysUsed // PPM Signal always be used to control the sensitivity // Choose this if you want to use a dedicated channel just for // adjusting the sensitivity Cheers

Excuse me if I'm posting in the wrong place. I'm trying to built an openXvario to be used with a FrSky FLD-02 and a Arduino Pro mini to take care of the beeps (no 9X Tx). So far I have the airborne parts over the bench ( Arduino Pro mini + MS5611), it is working (or at least part of it). I'm not usi...