Search found 243 matches
- Wed Oct 26, 2016 4:44 pm
- Forum: openTx
- Topic: Ailerons moving slow & with delay
- Replies: 40
- Views: 29126
- Wed May 25, 2016 7:46 pm
- Forum: Software
- Topic: OpenTx Companion for 64 bit Fedora ? (64 bit RPM ?)
- Replies: 4
- Views: 7469
- Fri May 06, 2016 9:16 pm
- Forum: openTx
- Topic: [Lua] Qestions on Debugging Mixer Scripts & Req for info on Compiled Scripts
- Replies: 2
- Views: 3285
- Mon Mar 14, 2016 2:34 pm
- Forum: openTx
- Topic: Multirotor custom LUA issue
- Replies: 4
- Views: 4164
Re: Multirotor custom LUA issue
Do you get exclamation icon (next to the clock, like in attached picture) after you see this issue? If yes, then that means that the radio rebooted unexpectedly.
- Fri Feb 26, 2016 2:20 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Jeti tx Gimbal on Taranis
- Replies: 36
- Views: 22998
Re: Jeti tx Gimbal on Taranis
You have a lot of work ahead. That sensor is programmable and probably also needs calibration. After you do that, you will have to produce steady analogue signal in a range from 0 to 3.3V. That is what Taranis expects. So it is not a drop-in replacement.
- Thu Feb 25, 2016 8:58 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Jeti tx Gimbal on Taranis
- Replies: 36
- Views: 22998
Re: Jeti tx Gimbal on Taranis
We know the Horus circuit, but that does not matter, the Jeti might have completely different layout and type if hall sensor.
- Thu Feb 25, 2016 9:40 am
- Forum: companion9x
- Topic: "Compare Model" in OpenTX Companion 2.1.7 not working as anticipated
- Replies: 2
- Views: 8425
Re: "Compare Model" in OpenTX Companion 2.1.7 not working as anticipated
Right, the compare window is still missing some items, those that you found are among them. A known issue. https://github.com/opentx/opentx/issues/1063
- Mon Feb 22, 2016 2:14 pm
- Forum: FrSky Taranis radio
- Topic: Looking for idiots guide to update TX module in Taranis
- Replies: 43
- Views: 23581
Re: Looking for idiots guide to update TX module in Taranis
I see this kind of problem quite a lot recently on the forums. I wonder what might be causing it.rcgyuk wrote:Hi,
I get a message:
Firmware Update Error
- Wed Feb 17, 2016 8:11 pm
- Forum: openTx
- Topic: Change sound frequency based of telemetry reading
- Replies: 2
- Views: 3351
- Thu Feb 11, 2016 8:27 pm
- Forum: FrSky Taranis radio
- Topic: Linux Taranis x9d plus dont work
- Replies: 12
- Views: 11007
Re: Linux Taranis x9d plus dont work
Dfu-util is only needed for flashing with radio in off state. Try other usb ports. Try on another computer, if it works then the radio is OK.
- Wed Jan 06, 2016 3:04 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Virus warning
- Replies: 1
- Views: 2887
Re: Virus warning
Still unsure why it is happening, more information at https://github.com/opentx/opentx/issues/3205. It is most probably a false positive.
- Mon Jan 04, 2016 9:00 pm
- Forum: openTx for FrSky radios
- Topic: Companion 2.1.6 Insert Line
- Replies: 5
- Views: 4808
Re: Companion 2.1.6 Insert Line
Created an issue for you https://github.com/opentx/opentx/issues/3202
- Sun Dec 20, 2015 7:41 am
- Forum: Hardware
- Topic: Taranis - not detected when connected to a PC
- Replies: 7
- Views: 4969
Re: Taranis - not detected when connected to a PC
Disconnect the battery and try again.
- Fri Dec 18, 2015 9:56 pm
- Forum: openTx for FrSky radios
- Topic: Taranis X9E model selection
- Replies: 7
- Views: 6876
Re: Taranis X9E model selection
You need to power on the radio in OpenTX Bootloader mode and then connect it to the computer. If you connect it when already powered on normally, you will get Joystick emulation. See http://open-txu.org/home/undergraduate-courses/fund-of-opentx/part-3-understanding-boot-loaders/ and https://github.c...
- Fri Dec 18, 2015 9:54 pm
- Forum: openTx
- Topic: Can't select switch via using switch in menus
- Replies: 3
- Views: 3493
Re: Can't select switch via using switch in menus
You need to select "autoswitch" option in Companion radio profile, then re-download firmware and flash.
- Wed Nov 25, 2015 11:45 am
- Forum: General help (FrSky Taranis radio)
- Topic: What is the minimum RSSI Value being logged?
- Replies: 3
- Views: 3658
Re: What is the minimum RSSI Value being logged?
You had three flight without problems, but the last flight shows RSSI drops to zero. Which means that telemetry was lost for that time. What changed between flight 3 and 4 to cause this?
- Sun Nov 15, 2015 3:41 pm
- Forum: Hardware
- Topic: Taranis X9D+ Telemetry connection problem
- Replies: 2
- Views: 3286
Re: Taranis X9D+ Telemetry connection problem
Lets try a simpler case first. Disconnect cable between RX and Teensy. That way you will only get basic telemetry like RSSI and SWR. See if that changes anything.
- Sat Oct 24, 2015 7:29 pm
- Forum: openTx
- Topic: memory consumption of scripts
- Replies: 3
- Views: 3664
Re: memory consumption of scripts
Long press ENT on main screen, Statistics..., PLUS key and look at the field "Free Mem" Mine is showing 58320b with only one small script running. Anything less then 4000b means that you have used all available memory.
- Mon Oct 19, 2015 5:00 am
- Forum: General help (FrSky Taranis radio)
- Topic: Play value VFAS - wrong value?!?
- Replies: 12
- Views: 11166
Re: Play value VFAS - wrong value?!?
There is a different sound pack required for 2.1! http://www.open-tx.org/downloads.html
- Mon Oct 12, 2015 8:28 pm
- Forum: openTx for FrSky radios
- Topic: Open-Tx/Companion 2 for Linux
- Replies: 19
- Views: 16518
Re: Open-Tx/Companion 2 for Linux
The old packages had some problems (can't remember what now) and I renamed them for backup. I will remove them now.
- Fri Oct 09, 2015 7:56 pm
- Forum: openTx
- Topic: OpenTX Having issues reading logfile
- Replies: 1
- Views: 2427
Re: OpenTX Having issues reading logfile
Your csv file does not looks like it came straight from the radio. The date format for example is different from the one the radio produces. How did you get that file. From the contents I presume you are using OpenTX 2.1.x version.
- Thu Sep 24, 2015 5:00 pm
- Forum: General help (FrSky Taranis radio)
- Topic: bootloader vanished
- Replies: 4
- Views: 4163
Re: bootloader vanished
Try reflashing the bootloader. Copy fimware to the SD card (file name length must be less than 32 characters with dot and extension included), turn on the radio, go to the SD browser, navigate to the bin file and select flash bootloader. More details on https://github.com/opentx/opentx/wiki/Taranis-...
- Thu Sep 24, 2015 5:07 am
- Forum: FrSky Taranis radio
- Topic: Taranis X9D and X6R with VBar NEO - short connection losses
- Replies: 4
- Views: 4400
Re: Taranis X9D and X6R with VBar NEO - short connection los
Enable telemetry log on Taranis and analyze the data. Any link loss should be apparent in the logs. Do you get any RSSI warnings from the radio?
- Wed Sep 23, 2015 8:11 pm
- Forum: General help (FrSky Taranis radio)
- Topic: bootloader vanished
- Replies: 4
- Views: 4163
Re: bootloader vanished
That can't be true, the radio would not start without it. Disconnect USB cable before powering up with the trims held.
- Thu Sep 17, 2015 12:28 pm
- Forum: Software
- Topic: Open Companion 2.1.1
- Replies: 13
- Views: 8420
- Thu Sep 03, 2015 4:45 pm
- Forum: General help (FrSky Taranis radio)
- Topic: FRsky GPS sound
- Replies: 4
- Views: 4255
Re: FRsky GPS sound
What kind of noise?
- Thu Sep 03, 2015 4:42 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Mlink-FrSky-Telemetry converter
- Replies: 188
- Views: 105346
Re: Mlink-FrSky-Telemetry converter
Re negative altitude https://github.com/opentx/opentx/issues/2685
- Wed Sep 02, 2015 7:20 am
- Forum: General help (FrSky Taranis radio)
- Topic: taranis x9e and bluetooth
- Replies: 12
- Views: 14039
Re: taranis x9e and bluetooth
It's a Bluetooth 4 LE device, which is perhaps not supported by your PC.
- Sat Aug 08, 2015 8:20 am
- Forum: openTx
- Topic: Cell/Cells option is missing
- Replies: 4
- Views: 3637
- Fri Aug 07, 2015 6:45 pm
- Forum: Hardware
- Topic: X9E Realtime clock lost Date and Time after 1-2 days
- Replies: 3
- Views: 3588
Re: X9E Realtime clock lost Date and Time after 1-2 days
Helle, take a look at my comment here https://github.com/opentx/opentx/issues ... -128792600