openrcforums

Why are you posting the same thing over and over again.. If you want to change stuff just hit the EDIT button and edit your post.. You don't have to post a new version of the same thing.. João Sorry - website is screwing up giving me database errors and stating that it did not post. I refreshed and...

**** - site screw ups with msql errors causing multi-posts ****

jhsa - please delete this.

@Toroddandre I just found your sad tale. I read the whole thing and through the frustration of the SCK measurement questions and then the pin 17 and all. Don't give up! It is now your opportunity to replace the processor. Take a good picture of the processor. Order the m128. Cut all the fine legs of...

@Toroddandre I just found your sad tale. I read the whole thing and through the frustration of the SCK measurement questions and then the pin 17 and all. Don't give up! It is now your opportunity to replace the processor. Take a good picture of the processor. Order the m128. Cut all the fine legs of...

Did you look at the 9xVoice Mod Wiki? Should answer a lot of your questions... Will the wiki provide the information to go forward to plan the pcb and component orders and begin my 9x Voice smd adventure? Is this the board you made? And did you forget to update the wiki - 9xVoice to tell of your su...

@mbanzi Is this the board you made? And did you forget to update the wiki - 9xVoice to tell of your success? Will the wiki provide the information to go forward to plan the pcb and component orders and begin my 9x Voice smd adventure? http://openrcforums.com/wiki/images/thumb/5/55/9xVoice_MikeB_SMD_...

@mbanzi Is this the board you made? And did you forget to update the wiki - 9xVoice to tell of your success? Will the wiki provide the information to go forward to plan the pcb and component orders and begin my 9x Voice smd adventure? http://openrcforums.com/wiki/images/thumb/5/55/9xVoice_MikeB_SMD_...

Hi All Coders and Modders ---- I haven't read of anyone looking or playing with the Bitcraze Crazyflie micro quadcopter. Does anyone have one? Crazyflie Specs STM32103 Invensense MPU-6050 magnetometer HMC5883 altimeter MS5611-01BA03 radio@1mW based on the nRF24L01+ chip Radio bootloader which enable...

Note on fuses. When initially programming a stock avr chip the fuses are to be set for features and use. Once they are set we should only be adjusting/programming the eeprom and firmware as needed. The fuses are a different process and not affected by programming. Some chips have a limited number of...

Having read a description of the USBasp I use from ebay - they describe their firmware as having an auto timing (sck) adjust feature. Since we mostly are using the Chinese programmers I'd hazard they are using basically the same code base and all have the auto adjust timing. As my guessing continues...

Quick Notice! I just hacked my USBasp ---- It is the one discussed. I removed the 100Ohm resistor pack. That was one real micro soldering experience. My soldering iron tip is a telephone pole and the programmer SMD area is sub-micro. :-( I realize some my errors: I did not know. --- I've never used ...

HI - WOW to follow.... :) I am just getting into the RC fun and have both a 9X and 9XR. I've done some AVR programming with a programmer and using FTDI bitbang. Well, I like the cheap programmers. If soldered right - they will work. I too am tired of the worthless 'SCK' warning. I will reprogram the...

HI - I see this topic is dormant but, I feed on the last post. I've ordered the Turnigy 9X and the FrSky DJT and DIY. I'd like to use the 9X's FlySky with the FrSky DIY. If the FlySky and FrSky can not work together then I will match the two FrSky Tx's. What is the scheme to be able to have two Tx's...