Search found 47 matches

by Wene001
Wed Oct 26, 2016 6:45 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 685
Views: 420866

Re: Orange Module running MULTI protocol

Hi all together! i tried to flash my Orange Module from the first batch (with the second channel issue) with my Taranis X9E using the Ersky9x maintenance menu. I used the P12 connector on the Taranis X9E Board. I connected like the Taranis PDF from the first post http://openrcforums.com/forum/downlo...
by Wene001
Mon May 02, 2016 12:55 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: IMU6050 understanding
Replies: 7
Views: 6978

Re: IMU6050 understanding

I think the (calibrated) sensor values would be fine.
At least for me.
by Wene001
Mon May 02, 2016 9:05 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: IMU6050 understanding
Replies: 7
Views: 6978

Re: IMU6050 understanding

Thanks for clarifying. Will test more in the evening.
do you think we have enouph memory to have the options to send the Accelleration of the three sensor axis in G via AccX AccY and AccZ
by Wene001
Sun May 01, 2016 7:26 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: IMU6050 understanding
Replies: 7
Views: 6978

IMU6050 understanding

i have build an Openxsensor for testing IMU6050 made the calibration via serial monitor #define ACCX_SOURCE PITCH gives me Acceleration on X axis (about 8,90 to -8,90) #define ACCY_SOURCE ROLL gives me Acceleration on Z axis (about 8,90 to -8,90) #define ACCZ_SOURCE YAW gives me yaw Angle (+180° to ...
by Wene001
Sun May 01, 2016 3:44 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

Tried again with delay.
delay(3000); in line 429 (openxsensor) solved all my problems.

Thanks to all for help
by Wene001
Sun May 01, 2016 9:39 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

i have bridged the diode
Looks like the genuine Arduino pro mini doesnt have this diode
Now using GPS on VCC,GND,RX at Programming header and Pin6 via 10k resistor.
Looks good now
by Wene001
Sun May 01, 2016 8:08 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

Shame on me, found out that my pro mini doesnt provide 5V on VCC pin on the front side. Is the VCC pin on the programming pins only useable for programming the arduino? i`m a arduino noob The other VCC pin on the arduino gives 5V... Connected GPS to raw i works.... edit: found out that there is a re...
by Wene001
Fri Apr 29, 2016 7:52 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

I opened the gps yesterday (antenna is about 20x20mm) desoldered the rf shield and resoldered the antenna. No difference.
In the moment the cheap ublox lays powered up in the garden, while im @ work :-)
Hoping it catches some data and store it...
by Wene001
Fri Apr 29, 2016 7:10 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

After WHAT time, please? 15m after powering up the gps in clear sky How much dB do you get @ the gps signals? @Kalle Which one does perform better? CRIUS CN-06 or GY-GPS6MV2 i`ve ordered a Ublox Neo7M to compare. Looking forward to it http://de.aliexpress.com/item/Mini-Ublox-Neo-7M-GPS-with-Compass...
by Wene001
Thu Apr 28, 2016 6:09 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

@ mstrens
Which GPS do you have. And are you satified with this?
by Wene001
Thu Apr 28, 2016 4:28 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

I found this on google
Image
Mine looks this way (under clear sky)
Ublox7.jpg
Very weak i think

Tested u-center for android
on the same Table in my garde my Sony Xperia have a fix in 5 seconds
Handy.jpg
by Wene001
Thu Apr 28, 2016 4:14 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

We got live jim
I took my 20m USB extensions and put the Ublox 7 on a table in the garden completely free sky.
I got a fix after 15min 5 Sat fixes between 22 and 29 dB visulaized in U-center.
Do you have the same weak signals?
Anything i can try?
by Wene001
Thu Apr 28, 2016 11:03 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

My Uno should arrive in the next few days....
Do i have to worry about resistors when using the gps with my pl2303 serial adapter?
by Wene001
Thu Apr 28, 2016 9:50 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

Thanks for help

@Kalle
this is not the "problematic" one

I`ll test U-Center later
testet in and outside @ the window
waitet 10 Minutes

@nigel
Blue Wire to 10k on Pin 6 ?
by Wene001
Wed Apr 27, 2016 11:51 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: GPS sensor
Replies: 418
Views: 210181

Re: GPS sensor

Cant get GPS working Debug says openXsensor starting.. milli=0 freeram=946 vario is setting up.. vario is up.. END of GPS setup FRSky Output Module: TX Pin 4 Sport Protocol =1 End of general set up My GPS: http://www.aliexpress.com/item/Ublox-7-series-N32-GPS-for-Mini-NAZE32-Flight-Control-Board-QAV...
by Wene001
Wed Apr 27, 2016 7:01 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

Did more testing with the strange Gy-86 mounted on a new arduino @jhsa Sometimes Vario is working from first second. Reset Button helps every time.... @mstrens is it hard to implement a reset of the ms5611 in void setup ? edit: ive build a third openxsensor with a GY-86 and sometimes the vario doesn...
by Wene001
Wed Apr 27, 2016 11:26 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

2.17

In The moment i`m using faktor 0.1 in config.h from openxsensor for A3 and A4
by Wene001
Wed Apr 27, 2016 8:08 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

Thanks for help

@mstrens
Where do you think is the best place in code to implement the divider (10) for A3 and A4 ?
by Wene001
Wed Apr 27, 2016 8:06 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

I`ve tried already OXS 5, same behavior
I build a second one this morning, new (the same charge) arduino, and new GY-63
Works from the first second.

When my Arduino Uno arrives, ill disassemble the components and test the GY- 63 on the breadboard
by Wene001
Tue Apr 26, 2016 6:41 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

Did some more testing It has nothing to do with debug on or off. If Arduino TX and Gnd are connected to USB2Serial Adapter, every boot is successfull. (message "Vario is up" on serial monitor@115200) If Arduino TX and Gnd are not connected to USB2Serial Adapter, every first boot fails for ...
by Wene001
Tue Apr 26, 2016 4:18 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

Delay(1500) doesnt help (Tried yestersday)
I ll test with the right baud rate later
by Wene001
Tue Apr 26, 2016 1:29 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

For now CSB Pin is connected to GND
by Wene001
Tue Apr 26, 2016 1:13 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

hmmmmm suspect in the serial window i see this 6^›.}—ñÓ‚ £ÓV‚—“'+)_À:YÌ’‚Ñ*ÒÜÿ@ãxM/ÿ¨Ö­­“Úš£rð0Sl¯Í—_ÀiA£ mÜ “Á&Á/d$ when powering up. Is my 2303 Serial Adapter bad?? But more strange....with the debug option set in config.h vario works like a charm ??confused?? My config.h.... // OpenXsensor ht...
by Wene001
Tue Apr 26, 2016 10:34 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

Re: ms5611 power up issue

Input Voltage from s.port to arduino pro mini and ms5611 both hooked to raw pin
Both power leds solid (arduino and GY-63)

Testet with NiMh 5,95V
by Wene001
Tue Apr 26, 2016 8:04 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ms5611 power up issue
Replies: 21
Views: 13626

ms5611 power up issue

Hi I have build an openxsensor. Arduino pro mini clone 5v 16mhz GY-63 ms5611 Openxsensor newest master version form github (v7) Receiver is X8R wit EU LBT Firmware. if i power the receiver and the OXS at the same time, then there is no Vario Data working (Voltage reading from A0, A1, A2 works) if i ...
by Wene001
Thu Apr 14, 2016 10:47 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor running on Mega 2560 R2 ?
Replies: 2
Views: 3168

Re: OpenXsensor running on Mega 2560 R2 ?

Does not run on Arduino Mega.
My Unos and Minis arrive from the East. They work like a charm.
With a little trimming her and there, an old orange case is the new home of the Arduino Mini
Waiting for the baro sensor.....to be placed on top of the mini in the case
oxs.jpg
by Wene001
Sun Apr 10, 2016 7:07 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor running on Mega 2560 R2 ?
Replies: 2
Views: 3168

OpenXsensor running on Mega 2560 R2 ?

Hi
i´m new in arduino and openxsensor.
i,ve ordered arduino minis and barosensors in china.
in the meanwhile i tried to test OXS on my old Arduino Mega 2560 R2
Schould this run with this peace of hardware?!?
Cant get it to work...
by Wene001
Tue Apr 05, 2016 6:58 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: s.bus instead of PPM in
Replies: 10
Views: 6865

Re: s.bus instead of PPM in

thats right...
i suggested to use s.bus instead of ppm.
Mstrens answered that s.bus as input on openxsensor is hard to implement and it would better to use bidirektional s.port...
so i think no mistakes on my side...
by Wene001
Mon Apr 04, 2016 10:46 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: s.bus instead of PPM in
Replies: 10
Views: 6865

Re: s.bus instead of PPM in

Hi Kilrah
Hats up for your work

i`m sure all of us do mean s.port aka Smart Port

Do you have in mind to support such an uplink feature in the future?
by Wene001
Sun Apr 03, 2016 7:55 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: s.bus instead of PPM in
Replies: 10
Views: 6865

Re: s.bus instead of PPM in

That were a great feature for sure..
Dreaming again......an arduino only connected to sport. Giving various telemtry and control things like controlling openxsensor, trigger lights , a glow plug heater or other things with no need for a servo :-)

Go to advanced search