Search found 7 matches
- Wed Mar 13, 2013 8:55 pm
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
Re: FlySky 9X right gimbal problems
One great plug and play upgrade would be to purchase a Frsky DJT module and use the Frsky RXs! Sounds interesting, thanks! Especially the low voltage warnings! If you want to get your hands into the radio to add say the Smartieparts programmer board. Then you will be able to put Er9x or Open9x onto...
- Wed Mar 13, 2013 7:13 pm
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
Re: FlySky 9X right gimbal problems
It really is up to you.. What do you want to do? Is the radio just a small part of the hobby for you? Well, I'm new to the hobby. I flew real helicopters in the military, but stopped when I had kids. Thought it was a responsibility, you know? Anyway, I got into RC planes back as a teenager briefly....
- Wed Mar 13, 2013 6:40 pm
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
Re: FlySky 9X right gimbal problems
Thanks everyone! How are you with using a meter and reading schematics? It's been a while, but I can fight my way through schematics. I use a Fluke multimeter every day at work. I do have SOME good news at least. I went through the stick calibration procedure a couple times, and now my right stick s...
- Wed Mar 13, 2013 1:35 pm
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
Re: FlySky 9X right gimbal problems
Well, the Turnigy LCD backlight was installed, so the entire motherboard has been removed before I did it. The only damaged wire I found was one of the 2 backlight wires, which I re-soldered and heat shrunk just to be safe. All connectors are snug, but none of them "snap" in place. The onl...
- Wed Mar 13, 2013 3:14 am
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
Re: FlySky 9X right gimbal problems
I checked the pots tonight with a multimeter. Equal change in resistance both ways full deflection, and I checked the solder joints all the way to the trim tab PCBs. Everything seems to be fine.
I'm at a loss here.
I'm at a loss here.
- Tue Mar 12, 2013 9:06 pm
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
Re: FlySky 9X right gimbal problems
If this helps- I don't know what the ANAS screen is...
This is a stock radio. No new firmware.
This is a stock radio. No new firmware.
- Tue Mar 12, 2013 8:31 pm
- Forum: Hardware
- Topic: FlySky 9X right gimbal problems
- Replies: 14
- Views: 6697
FlySky 9X right gimbal problems
My radio has no effect on full left or full down on the right stick. I don't know if this is a centering problem, or something else. Even the "DISPLAY" function shows no movement into the ranges, though the ELE section shows half deflection with the stick centered. Also, moving the right s...