openrcforums

Disregard, figured it out by shutting all down creating a 2d setup including heli and flashed that. This forum has So much good info, I read and learn here for years. Thanks everyone.

I've been using 2.1.19 for several months and it works great with my multicopter's. I loaded the Taranis X9D with no heli and lua selected. Now I want to dust off some old CPPM helicopters and fly with 2.1.19. I am hitting a wall to get my Campanion 2.1 to flash firmware with heli included now. Can ...

Provided I can flash the XJT, I use the FrSky USB-b on the DJT.

Great Mike, if you new a tester on firmware I have a model flying with this hardware.

Received a FrSky XJT module and X8R a week ago. Plugged the XJT into the 9XR and using the X8R on a Quad build I'm working on. Question for the forum, "Has anyone worked through the telemetry wiring for this setup to use with the FrSky modules"? If nothing else the capability for on-screen...

Thanks

Here is pic from iPad. Note the two solder pads on each end they are .5MmX2mm, like I said surface mount technology.

The switches I used from digikey have one tab per end, not same design as ones from eBay, I have both. The digikey switch is smaller to work with but IMO are a better choice for design and purpose. Later today ill try to post a single pic of one switch, so small it's hard to focus. The only problem ...

I used a switch from digikey, SW1020CT-ND. Size is 2X4X1.5mm. Get some good glasses and small tip iron, SMT pads. Also have a 100 of the above reference switches if anyone needs a few.

Put me down for two boards, one for each of my installations.

I read that "sold out" condition for the board. Does anyone know of any source for the board or am I a dollar short and hour late? Thanks

Finally finished mounting the flymentor and completed the eepe file for the 9XR which has er9X firmware. Thanks to Ghost for the help. The radio does not use a stock template, no swash type, file includes several curves more than I used. Limits are +/- 100, no sub trims, the gyro channel 4 is invert...

OK, making those changes after this reply. Thanks for your help.

Here is my simple eepe. Not long but this noob has limited knowledage and was happy when the servos went the proper direction and didn't max out and chatter.

An update. I have all movement correct on collective and cyclic. Servos move the correct direction but I can only get one curve to work on Ch3 and Ch3 is--- 100% THR c1, c1 is -64,-15, 22, 50, 90. Also R 100% Thr THR on ch3 for throttle hold. Ch6 for pitch is 100% Thr. If I try to reference a curve ...

Ok, thank you for quick answer. I'll print flash open9x and press keys to get the models back. But once loaded I can then download the models to a saved file as I understand C9X. Again thanks.

It is a 9XR that I received from HK several weeks ago. My TH9x has Open9X installed with telemetry up and running. The 9XR still has stock firmware and the models I wanted to download into companion9x and back once open9x is loaded.

Hello, my programmer came today from HK and I am ready to flash my 9XR with open9X. I checked the 12 pages of previous posts looking for a way to download the models I have built in the 9X and haven't found a post. Could someone provide a link for saving my models? The 9X has stock firmware. I tried...

Hi there i have a simillare setup. i have 450 clone with FM. i did setup almost everything as you did but i can't figure out the idleup curves. how to mix them into the thr stick. can you please specify how you did it ? thank you. I hope one of you is still watching this post. I also have a 450 clo...

Has anyone setup a 450 clone with Flymentor installed (has flown with stock firmware in the TH9X) and now have installed Open9X in the TH9X. Used the SP board and also the TelemetrEZ board. I found several references on the ER board for flymentor and used that as lead to get some correct servo movem...