Search found 1858 matches

by bob195558
Mon Jun 25, 2018 2:08 pm
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3936
Views: 249205

Re: ERSKY9X Coding

MikeB wrote:
Mon Jun 25, 2018 1:33 pm
By "cansel/reset the telemetry voice" do you mean flush the queue of voice messages ?
If so, then you do have a "Flush switch" you may set.
You will find that at the end of the model voice alerts.
Yes, did not know or remembered we had this feature.
Thank you Mike !
by bob195558
Sat Jun 23, 2018 12:01 pm
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 5
Views: 161

Re: Switch arm with DJI Naza M lite

Some more info here: (http://openrcforums.com/forum/viewtopic.php?f=7&t=4582&p=114948&hilit=Naza+M+Lite#p114948) With the Taranis the switch I use is labeled "SF" and I am not sure I am using it to arm, but I am using as a safety switch on CH3 for the Throttle. SF ERSKY9X Taranis NASA M Lite.jpg Sor...
by bob195558
Sat Jun 23, 2018 11:53 am
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 5
Views: 161

Re: Switch arm with DJI Naza M lite

Found this not sure it has what you need:
(http://openrcforums.com/forum/viewtopic ... te#p116428)
by bob195558
Sat Jun 23, 2018 11:49 am
Forum: ersky9xr
Topic: Switch arm with DJI Naza M lite
Replies: 5
Views: 161

Re: Switch arm with DJI Naza M lite

I did/do this with my (ersky9x) Taranis, I will see if I can find where I have it posted.
by bob195558
Sat Jun 23, 2018 11:41 am
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3936
Views: 249205

Re: ERSKY9X Coding

I like the idea telemetry reset, could/would it cansel/reset the telemetry voice also ?
by bob195558
Mon Jun 04, 2018 12:02 pm
Forum: ersky9x
Topic: ErSky9x Manual
Replies: 4
Views: 294

Re: ErSky9x Manual

Thank you João for these ErSky9x Video Manuals ! :D
by bob195558
Fri Jun 01, 2018 12:51 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Manuals
Replies: 17
Views: 43077

Re: 9XR Pro Manuals

Not sure why all 4 pots seem to be behaving the same way.
I would not think all 4 pots to be bad, but they could all be bad.
You do have the stock 9XR-pro Gimbals (which have poor pots in them) ?
by bob195558
Thu May 31, 2018 7:15 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Manuals
Replies: 17
Views: 43077

Re: 9XR Pro Manuals

Not work for me also !
by bob195558
Tue May 22, 2018 2:56 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: Adhesion to Heated Print Bed (3D Printing)

Tim at TH3D saw the problem I was having with the EZMat very quickly, which it turned out to be the printing nozzle height was too high. For some unknown reason the printing nozzle height change and when trying to adjust it using the Z-Offset adjustment, my adjustments were to little. I had removed ...
by bob195558
Sat May 19, 2018 2:45 am
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3936
Views: 249205

Re: ERSKY9X Coding

Yes, good news for us who use the XJT modules.
Mike would this also help with the reporting time of the telemetry (like RSSI) ?
by bob195558
Fri May 18, 2018 11:35 pm
Forum: ersky9x
Topic: ERSKY9X Coding
Replies: 3936
Views: 249205

Re: ERSKY9X Coding

João only uses DJT modules, so he is OK with all the added switches he has with his radios then ? :D ;) :mrgreen:
by bob195558
Wed May 16, 2018 2:03 am
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: EZMat Adhesion to Heated Print Bed (3D Printing)

The 3D Carbon Fiber Vinyl Adhesive Wrap continues to work well for me. Today I changed back to the TH3D EZMat to see if it will work properly, as the last time using it had lost the ability for the 3D Print to adhere to it. I lightly sanded with 100 grit sandpaper roughing up the surface and cleaned...
by bob195558
Mon May 14, 2018 1:24 pm
Forum: Other Electronic Projects
Topic: CR10 3D-Printer, EZABL Bed Leveling / Tramming Upgrade Mod
Replies: 27
Views: 4257

EZABL Case Moved Inside, EZABL Bed Leveling / Tramming Upgrade Mod

MOVING EZABL Case Inside CR10 Control Box I install the Direct Wire "EZABL Case" to the inside of my CR10 Control Box (upper right side toward the back, see picture). I cut the EZABL Sensor Probe Wire (about 6 inches from the EZABL Case) and soldered a 3 Wire Connector Plug between the EZABL Sensor...
by bob195558
Thu May 10, 2018 4:09 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: EZMat Adhesion to Heated Print Bed (3D Printing)

Update about using the TH3D EZMat Build Surface The first Print adhered to good to the TH3D EZMat Build Surface and after several prints I had Failure to have any adhesion to having some small spots of adhesion to the EZMat print surface. TH3D EZMat Build Surface Failed Adhesion.jpg I need to purcha...
by bob195558
Tue May 08, 2018 8:17 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: EZMat Adhesion to Heated Print Bed (3D Printing)

The first results using the new TH3D EZMat Build Surface is that my first Test Print Part sticks a lot, even after the TH3D EZMat Build Surface has cooled down. So using the new TH3D EZMat Build Surface I find it has a very high adhesion to the Heated Print Bed Surface. After the TH3D EZMat Surface ...
by bob195558
Tue May 08, 2018 1:56 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: EZMat Adhesion to Heated Print Bed (3D Printing)

Just received the TH3D EZMat Build Surface for my CR10, so will try this soon to compare it to the 3D Carbon Fiber Vinyl Adhesive Wrap. TH3D EZMat Build Surface.jpg Works with filament types (PLA, PETG, ABS, PC, ASA, TPE/TPU, and Nylon). 0.6mm Thick for durability and longevity – Can be installed di...
by bob195558
Tue May 08, 2018 11:02 am
Forum: Hardware
Topic: What Rx should I get?
Replies: 11
Views: 821

Re: What Rx should I get?

Hi VarietyPack ,
You can download the FrSky manuals here for more info: (https://www.frsky-rc.com/).
You may find getting the manual for the external XJT module will help with some info too.
I am not sure what the internal (transmitter) module is in the X7.
by bob195558
Mon May 07, 2018 1:46 pm
Forum: Hardware
Topic: What Rx should I get?
Replies: 11
Views: 821

Re: What Rx should I get?

FrSky SP-FLVS - Smart Port Lipo Voltage Sensor: (https://alofthobbies.com/frsky-sp-flvs- ... ensor.html)

FrSky High Precision Vario (FVAS-02H): (https://alofthobbies.com/frsky-high-pre ... s-02h.html)
by bob195558
Mon May 07, 2018 1:31 pm
Forum: Hardware
Topic: What Rx should I get?
Replies: 11
Views: 821

Re: What Rx should I get?

VarietyPack wrote:
Mon May 07, 2018 5:23 am
I was wondering about your thoughts on telemetry modules ?
You will like the FrSky telemetry better , because they have the best telemetry for the cost and it work very well.
Your X7 is made for it.
by bob195558
Sat May 05, 2018 2:47 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: Adhesion to Heated Print Bed (3D Printing)

3D Printing using the Car Vinyl Adhesive Wrap


3D Print using Vinyl Adhesive Wrap.jpg
Using Car Vinyl Wrap applied to 12" x 12" Mirror
by bob195558
Tue May 01, 2018 3:57 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Re: Adhesion to Heated Print Bed (3D Printing)

I applied the Vinyl Adhesive Car Wrap to one of the (Home Depot) Glacier Bay 12 x 12 inch, Plain Edge Bath Mirrors (6-Pack): (https://www.homedepot.com/p/Glacier-Bay-12-in-x-12-in-Plain-Edge-Bath-Mirrors-6-Pack-81175/205513215). Applying this car Vinyl Adhesive carefully so that there is no air bubb...
by bob195558
Tue May 01, 2018 12:01 pm
Forum: Other Electronic Projects
Topic: Adhesion to Heated Print Bed (3D Printing)
Replies: 7
Views: 1811

Adhesion to Heated Print Bed (3D Printing)

Difficulty getting your 3D Print to sticking to your Print Bed ? If and when you are having difficulty with your 3D print sticking to Print Bed, there are many things which can cause this problem, which some are: 1) Printing Z-Gap between Nozzle and Print Bed is improper. 2) Print Bed not level (Tr...
by bob195558
Fri Apr 27, 2018 4:30 pm
Forum: Other Electronic Projects
Topic: Creality CR10 3D Printer Stepper Motor Dampers Upgrade
Replies: 0
Views: 236

Creality CR10 3D Printer Stepper Motor Dampers Upgrade

CR10 Upgrade Vibration Dampers
CR10 Upgrade Vibration Dampers.jpg
These Vibration Dampers help to remove some of the vibration which helps to increase the quality of your 3D Print.
by bob195558
Fri Apr 27, 2018 2:28 pm
Forum: Other Electronic Projects
Topic: (CR10 3D Printer) Single Z Stepper Motor with Dual Lead Screws Upgrade
Replies: 0
Views: 195

(CR10 3D Printer) Single Z Stepper Motor with Dual Lead Screws Upgrade

CR10 Upgrade with a Single Stepper Motor using Dual Z Lead Screws Single Z Stepper Motor with Dual Lead Screws.jpg This upgrade cost less and is more reliable. There are Dual Z Stepper Motors Upgrade Kits, but after several hours of Z movement the two Z Stepper Motors become misaligned and need to ...
by bob195558
Thu Apr 26, 2018 11:14 pm
Forum: er9x
Topic: Audio (voice) - Stock 9X PCB
Replies: 4088
Views: 326815

Re: Audio (voice) - Stock 9X PCB

I would like to purchase the Ar9x too.
by bob195558
Tue Apr 24, 2018 12:27 pm
Forum: General help (FrSky Taranis radio)
Topic: Taranis QX7 won't turn on
Replies: 1
Views: 276

Re: Taranis QX7 won't turn on

Being it is new, what about using the warranty to get a replacement first ?
by bob195558
Tue Apr 24, 2018 11:25 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR/9XR pro faceplate mod
Replies: 15
Views: 902

Re: 9XR/9XR pro faceplate mod (3D RC Printing)

Hi AndreL, Good to see your post of 3D Printed RC Parts !!! :D There is not yet a category for where to post "3D Printed RC Parts and Projects" so for now, I am posting under the "Other Electronic Projects" category. If you would like to see some of my 3D Printing Projects, see here: (http://openrcf...
by bob195558
Tue Apr 24, 2018 11:07 am
Forum: Hardware
Topic: What Rx should I get?
Replies: 11
Views: 821

Re: What Rx should I get?

Hi VarietyPack , I suggest you look at the FrSky receivers like the X8R, X6R, X4R and there are other see here: (https://www.frsky-rc.com/product-category/receivers/). I like and is a must for me to use receivers that do telemetry info back to my radio. (https://alofthobbies.com/radio/frsky-telemetr...
by bob195558
Thu Apr 19, 2018 1:45 pm
Forum: er9x
Topic: Audio (voice) - Stock 9X PCB
Replies: 4088
Views: 326815

Re: Audio (voice) - Stock 9X PCB (AR9x board)

The AR9x replacement board, when it was available, did cost much less: (http://www.ar9x.net/).

Go to advanced search