Search found 1055 matches

by LTMNO
Mon Jun 25, 2018 5:17 pm
Forum: Other Radios
Topic: 9x M64 PCB and some spare parts = Working Radio
Replies: 3
Views: 416

Re: 9x M64 PCB and some spare parts = Working Radio

Hey Joao, yes... absolutely... its a funny thing as I was just researching that, no foolin... ;-) Considering I only use FrSky for the most part but as long as I can get Telemetry and connect to my X and D Series Rx's and my VD5M. Frsky (Based on CC2500 Chip) should do the trick with an Adruino Pro ...
by LTMNO
Mon Jun 25, 2018 1:52 pm
Forum: Other Radios
Topic: 9x M64 PCB and some spare parts = Working Radio
Replies: 3
Views: 416

9x M64 PCB and some spare parts = Working Radio

Hello All, not that this is any milestone or triumph compared to some of the brain power in this forum... just wanted to share a build that I just completed with some spare parts seeing that I didn't have a 9x Radio anymore and was my introduction into this forum many years ago. Thanks to some docum...
by LTMNO
Sun Jun 24, 2018 10:41 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 66323

Re: Adding MAVLINK support

Man its been a while since my last post. I am still tinkering, literally... I have sold all my radios but I still manage to have 2 quads left of my 8. That being said at one point I had 4-5 9x radios. With all the mods I have enough spare parts to build one... So i did. Now, I was trying to figure o...
by LTMNO
Sat Jan 13, 2018 11:23 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

It works very well :) I have basically an arduino voice module in one of my radios, and it connects to the 9x mainboard via just 2 wires instead of all 4 to the LCD vias, as well as the one on PB7. This gave me 2 more switches (push buttons in my case) and also freed some other connections for othe...
by LTMNO
Sat Jan 13, 2018 11:21 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Problem solved... The cuprit was a faulty cable that connects the TeZ to the Switches. Apparently the AIL Lead was faulty... or loosen from the Crimped Connector. Luckily, I have purchased a Crimpt Set and connectors for another project that I was working on with my Laser Cutter. That being said, a...
by LTMNO
Sat Jan 13, 2018 9:47 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

That option is to be used when you connect the Megasound board via Serial. If yours is connected to the LCD vias, leave it off, or of course, it will break audio, backlight, and throttle trims.. :) João Sent from my BLN-L21 using Tapatalk Lol. Been away too long. That feature works great then. 😜
by LTMNO
Sat Jan 13, 2018 7:33 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

MikeB wrote:
Sat Jan 13, 2018 6:45 pm
I made a mistake and r821 does report as r820.

Have you also ticked "FrSky Mod Done"?

Mike.
I have with no affect.
I have also found a bug with r820/1 with the Megasound-Serial option. It breaks the backlight and audio when enabled.
by LTMNO
Sat Jan 13, 2018 6:42 pm
Forum: FRSky Telemetry Mods
Topic: Introducing: TelemetrEZ
Replies: 1289
Views: 138575

Re: Introducing: TelemetrEZ

https://github.com/MikeBland/9x-telemetrez/blob/master/src/telemetrEZ.hex Should be the latest anyway. All the source files are there as well. Mike. Hello Mike, thanks for the link... I did find that on your site.. didn't know if it was r90. The file size matches what I had in my drive. That being ...
by LTMNO
Sat Jan 13, 2018 6:06 pm
Forum: FRSky Telemetry Mods
Topic: Introducing: TelemetrEZ
Replies: 1289
Views: 138575

Re: Introducing: TelemetrEZ

Does anyone have latest r90 or r89 for TeZ?
Links to firmware are all dowm.

Thanks.


Nevermind, i found them on a system i had...
by LTMNO
Sat Jan 13, 2018 5:36 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Alright, where I am at now is that the side load cable for the TeZ is repaired and the GEAR and TRN and ID0/1/2 are working again... I had a lose GND wire in the connector. I am still only able to update to : VERS: V1.748-Mike DATE: 30.11.2016 TIME: 13.41.21 SVN: er9x-r820 MOD: FRSKY 128 and the THR...
by LTMNO
Sat Jan 13, 2018 4:07 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

To enable the hardware menu, power the radio while holding the left horizontal trim to the left for about a second, and then release it. Hardware menu in Radio Setup/Hardware should be enabled João Thanks that worked great... I forgot about that... but the problem still exists.. i have noticed that...
by LTMNO
Sat Jan 13, 2018 1:37 am
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Strangely enough...
I have downloaded the file for r821 but it seems that this is getting installed instead

VERS: V1.748-Mike
DATE: 30.11.2016
TIME: 13.41.21
SVN: er9x-r820
MOD: FRSKY 128
by LTMNO
Sat Jan 13, 2018 12:33 am
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Correct, my bad.. AIL... I was in a B100 update/install so I didn't see the screen. I am loading er9x-128-r821.hex on there now... I have seen that in the Config Screen in eepe.. not on the radio, I will check.
by LTMNO
Fri Jan 12, 2018 11:35 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Tell me about it... the only problem now is that with r820 or r821 I can't seem to get the TeZ to enable... and fix the THR and RUD AIL ;-).
Starting the process over again...
by LTMNO
Fri Jan 12, 2018 9:02 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

yup, r421 is the latest on er9x.com
and I am running it on a Windows Machine... I have had no success on my Mac.
by LTMNO
Fri Jan 12, 2018 8:27 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Hey Joao, long time no msg.... hope all is well... that being said, yes, i did try that several times... Funny thing, i just remembered what I had to do to fix this issue. I had to program the system with OpenTx via Companion 2.1. That was successful. Then program it again with Companion 2.1 and loa...
by LTMNO
Fri Jan 12, 2018 7:38 pm
Forum: Hardware
Topic: ER9X flashing problems
Replies: 35
Views: 2317

Re: ER9X flashing problems

Well, its been a long time since my last post... I do recall the last time I tried to update this particular radio that i had an issue and swore to never update it again. That being said, I have sold it and was making some changes to the config and accidentally updated the firmware. I can't get Er9x...
by LTMNO
Sun Aug 14, 2016 6:29 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: TelemetrEZ Board (New in the Box)
Replies: 4
Views: 2015

Re: TelemetrEZ Board (New in the Box)

oh awesome... great to hear it.
Enjoy!
by LTMNO
Mon Aug 01, 2016 5:45 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: 9XTreme For Sale (in the box)
Replies: 13
Views: 3067

Re: 9XTreme For Sale (in the box)

bob195558 wrote:Hi Kilrah,
Not with this price: (http://www.hobbyking.com/hobbyking/stor ... dule_.html).
(Sale price: $59.99).
Man that is cheap... but its so ugly.. ;-)
I guess they are clearing the way for new stuff...
by LTMNO
Mon Aug 01, 2016 5:39 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: TelemetrEZ Board (New in the Box)
Replies: 4
Views: 2015

Re: TelemetrEZ Board (New in the Box)

Sold to Octavios...
by LTMNO
Mon Aug 01, 2016 5:38 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: 9XTreme For Sale (in the box)
Replies: 13
Views: 3067

Re: 9XTreme For Sale (in the box)

Sorry, didn't see the posts...
its just the 9Xtreme.. brand new in the box...
comes with :

Image
by LTMNO
Wed Jul 27, 2016 1:58 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: TelemetrEZ Board (New in the Box)
Replies: 4
Views: 2015

TelemetrEZ Board (New in the Box)

C$32.12 reg price
C$16 1/2 price
by LTMNO
Wed Jul 27, 2016 1:56 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: 9X Main Board M64 (Brand New in the box)
Replies: 0
Views: 2378

9X Main Board M64 (Brand New in the box)

9X Main Board M64 (Brand New in the box)

$12
by LTMNO
Wed Jul 27, 2016 1:52 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: 9x-m128 / Telemetry Mod / FrSky Lite Converter / MegaSound9x(Serial) / er9x
Replies: 0
Views: 1929

9x-m128 / Telemetry Mod / FrSky Lite Converter / MegaSound9x(Serial) / er9x

9x-m128 / Telemetry Mod / FrSky Lite Converter / MegaSound9x(Serial) / er9x

Make me an offer....
by LTMNO
Wed Jul 27, 2016 1:51 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: 9x-m128 / TeZ / SP Rev 2.4 / Rotary Encoder / Haptic / MegaSound9x(Serial) / er9x
Replies: 0
Views: 1882

9x-m128 / TeZ / SP Rev 2.4 / Rotary Encoder / Haptic / MegaSound9x(Serial) / er9x

9x-m128 / TeZ / SP Rev 2.4 / Rotary Encoder / Haptic / MegaSound9x(Serial) / er9x

Make me an offer...
by LTMNO
Wed Jul 27, 2016 1:50 pm
Forum: Where to buy / Spares / Modules? Selling up?
Topic: 9XTreme For Sale (in the box)
Replies: 13
Views: 3067

9XTreme For Sale (in the box)

C$92.36 Regular Cost
C$46.18 1/2 price
by LTMNO
Wed Jul 27, 2016 1:26 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 66323

Re: Adding MAVLINK support

Wow, you guys have been busy.... great stuff on the Mavlink Support Mike et al. I will have to read on to see if any updates to the 9XTreme Mavlink Support... (not the (9XPro). Last I recall was that we pretty much had all working Telemetry wise with the ArduinoProMini running on the Quad(APM) side....
by LTMNO
Wed Mar 30, 2016 8:25 pm
Forum: er9x
Topic: er9x development
Replies: 3055
Views: 273527

Re: er9x development

Yes, r820 includes SBUS protocol. I have no idea about the "unplug the battery" problem! I can only guess it is not armed any more. No one else has reported they are using SBUS, although the MULTI protocol now uses almost the same protocol, so shares the code, and that is working OK. Mike. I am usi...
by LTMNO
Mon Mar 14, 2016 3:26 pm
Forum: 9Xtreme upgrade board
Topic: speaker hiss
Replies: 346
Views: 25660

Re: speaker hiss

All the best.. I am still very much monitoring your progress as i am interested in finding out the cause of the hiss as well. ;-)

hope the back feels better.
by LTMNO
Fri Mar 11, 2016 3:42 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 66323

Re: Adding MAVLINK support

From memory, when I ran this on the X8R, I grounded D4 to the ground on the Arduino bottom left, not via the X8R S.Port ground - and all worked as advertised ... Its probably better doing it your way as you don't create a GND loop. But that being said.. I had a servo wire connected to the S.Port an...

Go to advanced search