openrcforums

Have you changed the trim? Or maybe a subtrim value. I just tested mine, new model output goes from -100 to 100 with 0.3 at center. I gave it some trim so center went to 5. The endpoint then went to 100(stuck at limit) and down to -95(as expected), -Gohst Just guessing but when I have issues I sele...

ShowMaster , completed sticks calibration this way few times, same results as in my first post. I used menu LIMITS 6/11 to correct the values and now I have zeros on desired channels. Values are floating up to +-0.3 if I slightly touch the stick. Flaps 30 , if I understood it correctly, the values ...

Hello everyone! Flashed my turnigy 9x with er9x build r782 yesterday using guide in the wiki, thank you very much for it! I did sticks calibration numerous times, but sticks are out of center in the neutral position. To be specific: 1) throttle: -100 (down position, in other words - this is perfect)...

Thank you very much, Kilrah! I want to go the first route - "install the module in the radio with a switch to route power/signal either to the back module or the DSM module".

Will keep this thread updated with progress

Hello everyone! I'm new to all this stuff, please excuse my incompetence :oops: I need your help guys very much! I have turnigy 9x with stock v2 firmware using which I fly wltoys v911 helicopter. I want to buy blade ncpx and want to control it with my 9x. My goal is to make my 9x able to control bot...