openrcforums

Is any 5V switched volt regulator giving issues to the transmitter? Because recently I have replaced my standard volt regulator of my er9sky board. Last thing I want is that it gives more internal distortions. http://openrcforums.com/forum/viewtopic.php?f=7&t=4758&p=67472&hilit=volt+regu...

Wauw.... this great news for maintenance...

kaos wrote:Need to know what brand of button battery you are using.

Actually also Duracell, but i haven flown much last year, but i don't think that has something to do with it.

Mine already survives more then 1 year.

LTMNO wrote:great work, question, what was the reason for the change? just a better VR?

Less energy consumption and a geek to replace it now it can

VR = ?

Replaced today the volt regulator, to remove the old i have cutted the regulator from the board, only then I was able to remove the old pins from the board. Placing the new one was simple task.

With the old regulator the avarege mAh was 148, the new uses 126.

Sent from Tapatalk

SkyNorth wrote:Use Option B

-Brent

Thank you!

Today arrived my new volt regulator, OKI-78SR-5/1.5-W36-C for my ersky9x.
Question, i can't find the ersky9 board-layout to determine which pin is what?
Corresponding to the photo, which position (A or B) i have to mount the regulator?

Just wondering, would it ever be possible to connect a USB game joystick on a ErSky board? Thinking about to hookup a game joystick on an my Radio. I am aware of the USB > PPM, Arduino solutions. Or another extreme solution i am thinking of is to hard-wire connect the game joystick directly to the E...

Will do Dutch: nl.h

I've built a version of the code with a fix, you can find it here: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676&p=65894#p65894 . Mike. That worked very well, no more rebooting when copying files over the USB from laptop to radio. Note: in menu 1/11, i missing the option sound whic...

unless you have dog's ear, majority human ear can only hear 20-20KHz. ;) Only very high end speaker can reproduce 20-20KHz truly, all the others are distorted at both ends of spectrum. the little speaker in the tx can reproduce 500-15KHz would be lucky. :) NOTE: I am talking here only about MONO so...

http://code.google.com/p/ersky9x/source/browse/trunk/ersky9x_rom.bin?r=130 Right click on "view raw file" and select "save as". Mike. Tested, i can confirm that R130 USB works flawless. With R188 it doesn't. Another thing i notice with R188, i get a extra mount called: 'ERSKY_9X...

What I want to do is to test again with my previous firmware version, but not able to find it.
I used r130 before I upgraded to r188.

I'd agree that going from 22kHz to 44kHz is unlikely to give better sound quality. All it really does is make the .wav files bigger and gives the processor twice as much work to do to play them. The processor should really be left to control the aircraft! Mike. And it is not the co-processor who's ...

well, I would leave the "minus" file there.. You never know. example: when you're flying on a slope, you reset the altitude at ground level, but sometimes your glider might be lower ;) The files in Red are the system files. They must keep their numbers.. João Ok, ty. I have actually redon...

Edit1: 44100Hz can have more impact on the processor compared to the 22000Hz, only not sure how much more impact it gives on this small radios? Edit2: 0171 - 0177 announces only 1x, instead 2x. Replaced voice-pack Used voices: http://www.ivona.com/us/ Female: American English, Kendra Male: American ...

Question, why are these jumpers in place? Can they have nothing to do with the reboot process while using the USB?

Ok, you're using your files.. good. The problem is if you use the list from the other files you got from the google code, I think the file numbers are wrong. Download the last file from my pack from the link Mike posted above, get the .doc file which is the voice list, and follow it to renumber all...

Just looked at the code! There is a second reason the battery low voice message is played. This is the capacity monitoring alarm. This is configured in the RADIO SETUP2 menu (units of 50mAH). The capacity used is displayed in the BATTERY statistic screen (LONG UP from main screen). When you charge ...

Jhsa has done a lot of work on voice files. ersky9x currently uses the same files as er9x. You will find a good set here: http://openrcforums.com/forum/viewtopic.php?f=64&t=2195#p30081 . Try: New Sound Module 22KHz 16 Bit - Heather1.zip New Sound Module 22KHz 16 Bit - Heather2.zip The second zi...

Is there any calibration i need to do i am not aware of>, on my volt meter i measure 9.6 volt, ersky9x measure 9.4 volt. (on my FrSky voltage sensor it measures 9.79 volt)

edit:
Measured the voltage regulator: in 9.25 volt, out 4.84 volt (Life accu 9.60 volt).

MikeB wrote:Sorrty, didn't make my question clear, where did you get the files from exactly?

Mike.

http://code.google.com/p/ersky9x/downloads/list

MikeB wrote:Where, and which file(s) did you use to put the voice files on the SD card.

Mike.

I have placed them in a folder named 'voice'. The issue is that i hear constantly the warning,

Now i have voices installed, R188 + 0106 (rev 3.0 board), i receive a battery low warning. Using LiFe operating at 9.4 when the alarm sounds for Battery Low warning. In the menu the warning level is set on: 8.0v. Disabled 'Int. Frsky alarm' and set 'Alarms Warning' at Off edit: is the sound layout c...

Yes correct. initiated a format from Windows (7 64bit), Ersky9x (v3) reboots and then it comes back in USB mode. EDIT: Formatted the SDCARD on my laptop, but the reboot also start to happen when copying files from laptop to SDCARD. It looks random to me, it reboots aprox after 20 copied files (with ...

Just installed R188 and wanted to format my sdcard, 9x connected to my laptop. With the previous version this was not a issue. Now after i started the format from windows, ersky9x just crash (reboots).

There is no 'speicial' version for ERSKY9X, only one version. In er9x/open9x there are different versions. The latest version can be downloaded automatically after you install the eepskye (use r391). open eeskye it will tell you what the latest version and if you want to download it. The latest Tin...

I was wondering what is the actual latest version firmware and co-possessor Verizon i should use? When i go to the download page, i read older versions then i can read here on the forum! And the actual download of the firmware you can't tell by the name which version you are downloading. Also the Wi...

That is what i want to make. Already having a Logitech Joystick. Only what i like to know, how he did the internal wiring? I mean, made he a switch to disconnect all the wires or just switching all the wires by a switch? Which software did he used? Can you share us with more information? Do he have ...