Search found 18 matches

by ethebee
Tue Aug 06, 2013 8:32 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor test version
Replies: 42
Views: 8656

Re: openXsensor test version

What current sensor are you using? VFas is the correct field to display the voltage.. check with a voltmeter and confirm that the measured voltage is correct.. if not, you have an offset option in the code and you can correct it there I hope you recover quickly.. João Hi João, Yes - I checked with ...
by ethebee
Mon Aug 05, 2013 4:42 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor test version
Replies: 42
Views: 8656

Re: openXsensor test version

Hi Guys, Spent some time updating the transmitter for telemetry, speaker and haptic, now having a go at building and programming the openXsensor. Thoroughly enjoying myself with this micro programming lark! :) Everything went together reasonably well apart from an open-circuit battery sense resistor...
by ethebee
Sun Jul 28, 2013 8:19 pm
Forum: openTx model setup
Topic: Standard Glider Templates
Replies: 42
Views: 11374

Re: Standard Glider Templates

Rob,

Great standard template for Glider!

Just one other comment do you have your description of the Rudder & Elevator channels round the wrong way?

Eric
by ethebee
Tue Jul 23, 2013 9:04 am
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 510
Views: 156247

Re: Model Artwork for Taranis

Hi All, When I try to download from this or other threads on Taranis my PC just gets stuck with a 'connecting' message in Firefox! Downloads from other sites does not seem to be a problem however! Anybody else seeing similar issues? Cheers Eric Just fired up the Fox (little joke) and no problems do...
by ethebee
Mon Jul 22, 2013 12:09 pm
Forum: openTx for FrSky radios
Topic: Model Artwork for Taranis
Replies: 510
Views: 156247

Re: Model Artwork for Taranis

Hi All,

When I try to download from this or other threads on Taranis my PC just gets stuck with a 'connecting' message in Firefox!

Downloads from other sites does not seem to be a problem however!

Anybody else seeing similar issues?

Cheers

Eric
by ethebee
Fri Jul 19, 2013 12:55 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXV - Correct Pro Mini
Replies: 10
Views: 1737

Re: OpenXV - Correct Pro Mini

Kilrah wrote:They are 32kB, not MB ;)

Sent via mobile

Opps! My mistake :oops:

Still a good idea to clearly show that Atmega 328 is the right one to purchase. :roll:


Eric
by ethebee
Fri Jul 19, 2013 11:29 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXV - Correct Pro Mini
Replies: 10
Views: 1737

Re: OpenXV - Correct Pro Mini

João

Thanks for the quick reply!

By 32M I meant 32 Mbytes of code space!

Cheers

Eric
by ethebee
Fri Jul 19, 2013 11:21 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXV - Correct Pro Mini
Replies: 10
Views: 1737

Re: OpenXV - Correct Pro Mini

On Checking the parts I have I realised that I ordered the two sizes of Pro Mini - both 16M & 32M - so I'm OK! :D

Still may be a good idea to make it clear on the WIKI though!


Cheers

Eric
by ethebee
Fri Jul 19, 2013 11:04 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXV - Correct Pro Mini
Replies: 10
Views: 1737

OpenXV - Correct Pro Mini

Hi Guys, Have just updated my 9X to support FrSky Telemetry and was about to build the OpenX vario! Some while ago I used the details on the Wiki page to compile my components list and my parts duly arrived after long wait from China!! Now I have found a problem - when I compile the code it states t...
by ethebee
Wed May 29, 2013 8:09 pm
Forum: openTx
Topic: r2281 potscroll not working?
Replies: 21
Views: 2291

Re: r2281 potscroll not working?

bertrand35 wrote:[Right Long] When you are on 'A' will change it to 'a'. It divides the list of chars by 2.
OK I now understand.

A bit different!

But no problem now I know how to do it.

Cheers

Eric
by ethebee
Wed May 29, 2013 7:37 pm
Forum: openTx
Topic: r2281 potscroll not working?
Replies: 21
Views: 2291

Re: r2281 potscroll not working?

bertrand35 wrote:[Right Long] for lowercase!
Jhsa has a rotary encoder and press [RE Long]

Even [Right Long] does not work!

My Tx only beeps and the Backlight flashes when I get to a comma.

This used to work for me on previous firmware releases.

Am I doing anything wrong?

Eric
by ethebee
Wed May 29, 2013 6:04 pm
Forum: openTx
Topic: r2281 potscroll not working?
Replies: 21
Views: 2291

Re: r2281 potscroll not working?

Menu Key long does not do anything on my TX!

Even if I use the Up & Down buttons I am still unable to get to lower case letters - stops at comma.

Eric
by ethebee
Wed May 29, 2013 5:15 pm
Forum: openTx
Topic: r2281 potscroll not working?
Replies: 21
Views: 2291

Re: r2281 potscroll not working?

Checked with:
opentx-stock-templates-gvars-potscroll-sp22-battgraph-thrtrace-pgbar-novario-nogps-en-r2413

Pot now works but unable to scroll to lower case letters - stops at comma!

Eric
by ethebee
Tue May 28, 2013 8:59 pm
Forum: openTx
Topic: r2281 potscroll not working?
Replies: 21
Views: 2291

Re: r2281 potscroll not working?

I Re-Flashed my Tx and noticed the same problem with the latest firmware.

My code is "opentx-stock-templates-gvars-potscroll-sp22-dblkeys-battgraph-thrtrace-pgbar-novario-nogps-en-r2413"

Is this a common problem with these two releases?

Eric
by ethebee
Tue May 28, 2013 10:55 am
Forum: Hardware Mods
Topic: Extra 3 position switch
Replies: 74
Views: 22335

Re: Extra 3 position switch

Thanks Guys for all your suggestions!

Rob is right - looking at using the switch to provide additional Flight Modes so -

pmackenzie suggestion is what I need to do!

Cheers

Eric
by ethebee
Sun May 26, 2013 9:54 pm
Forum: Hardware Mods
Topic: Extra 3 position switch
Replies: 74
Views: 22335

Re: Extra 3 position switch

Hi, This is a great idea and I am thinking of up-grading my transmitter to add a 3 position switch in place of one of the pots. Already have the switch and resistors. Has Companion9x been updated to reflect the ideas behind this thread? If so how do I define the switches/pot in question? Thanks Eric
by ethebee
Wed May 22, 2013 7:54 am
Forum: Template Library
Topic: Full House E-Glider, Extra 3POS switch, Open9X, Phoenix 2K
Replies: 29
Views: 12423

Re: Full House E-Glider, Extra 3POS switch, Open9X, Phoenix

Rob,

Now works!

Don't know what the problem was - tried many times yesterday - kept getting a trying to connect from FireFox.

Cheers anyway!


Eric
by ethebee
Tue May 21, 2013 8:00 pm
Forum: Template Library
Topic: Full House E-Glider, Extra 3POS switch, Open9X, Phoenix 2K
Replies: 29
Views: 12423

Re: Full House E-Glider, Extra 3POS switch, Open9X, Phoenix

Rob,

The link to your template file does not seem to work!

Can you fix it?

Many Thanks

Eric

Go to advanced search