Search found 49 matches

by hackerjoe
Thu Jun 14, 2018 7:02 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I can't see why it wouldn't work, but I could be wrong of course.. João mmm...ok. I put it out there but so far had a lot of "looks" but no comment. Maybe Mike could throw some light on it if he get a free moment. Cheers Jorgo bluejets what exactly are you looking to accomplish? I just built Joao's...
by hackerjoe
Tue Apr 03, 2018 12:30 pm
Forum: er9x
Topic: Voice Packs for Er9x
Replies: 8
Views: 5966

Re: Voice Packs for Er9x

Hi Joao,

thank you
by hackerjoe
Mon Apr 02, 2018 6:52 pm
Forum: er9x
Topic: Voice Packs for Er9x
Replies: 8
Views: 5966

Re: Voice Packs for Er9x

Hi Joao,

My question is about the startup voice on radio power on.
Where is the " Welcome to ER9X Have a good flight " stored?
I know there is an option to change what plays after that - I think the default file is set to file number 260.

Thank you,
Joe
by hackerjoe
Mon Apr 02, 2018 1:54 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Ok, I have the second ArduVoice board installed and working in my TH9X Atmega64 chip. I have to look at the volume control as it is not going up or down but it is working. Just a note: I have found that using the 2 board design fits nicer in the radio. I have one more Arduvoice board to install. It'...
by hackerjoe
Thu Mar 29, 2018 1:15 am
Forum: er9x
Topic: I just want to verify this is the correct version for a 9X w/ Atmega64
Replies: 2
Views: 328

Re: I just want to verify this is the correct version for a 9X w/ Atmega64

Hi Mike,

Thank you
I'm working on the Telemetry Mod now using a DJT module.
I plan on installing the ArduVoice board as well.
I figured it was done like that too save flash. I think I recall reading about that some where and was just making sure I loaded the correct version.
by hackerjoe
Wed Mar 28, 2018 7:04 pm
Forum: er9x
Topic: Will this Module work in a 9X with the new Test FW?
Replies: 3
Views: 291

Re: Will this Module work in a 9X with the new Test FW?

Ok gotcha,

I thought it would be nicer to use a big boy remote on my indoor toys lol :shock: :roll: :D

Thank you
by hackerjoe
Wed Mar 28, 2018 2:00 pm
Forum: er9x
Topic: Will this Module work in a 9X with the new Test FW?
Replies: 3
Views: 291

Will this Module work in a 9X with the new Test FW?

I'm curious if this module will work in a 9X with the new Multiprotocol ER9X test version?
Multiprotocol TX Module For Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Taranis Q X7 Transmitter
Multiprotocol Module.jpg
by hackerjoe
Wed Mar 28, 2018 12:09 pm
Forum: er9x
Topic: I just want to verify this is the correct version for a 9X w/ Atmega64
Replies: 2
Views: 328

I just want to verify this is the correct version for a 9X w/ Atmega64

Is er9x-frsky-sv the correct version for a 9X Atmega64 radio with Serial Voice and Telemetry mod? I'm guessing it is from the frsky = Tel mod and sv = serial voice. I just want to be sure. I flashed my 9X Atmega64 radio with er9x-frsky-sv and when going into Hardware option there is nowhere to turn ...
by hackerjoe
Tue Mar 27, 2018 11:52 am
Forum: PROGRAMMERS
Topic: Yet another Chinese knockoff USBasp question
Replies: 1
Views: 840

Re: Yet another Chinese knockoff USBasp question

Ok I tried using another USBasp & Arduino in ISP mode but nothing has been able to see the Chinese programmer no matter how the pins were. :shock: I don't even see any J2 jumper on it either so I am going to call it wasted time and money. :roll: Windows see it but I can't use it to program anything ...
by hackerjoe
Mon Mar 26, 2018 11:10 pm
Forum: PROGRAMMERS
Topic: Yet another Chinese knockoff USBasp question
Replies: 1
Views: 840

Yet another Chinese knockoff USBasp question

USBasp1.jpg I have been reading some of the post and thought maybe I could fix my inop Chinese knockoff programmer. I have 2 different programmers ( one ordered from Hobby King & the other ordered from Banggood ) that work out of the box. They aren't Chinese knockoffs. Anyway I got home from work a...
by hackerjoe
Mon Mar 26, 2018 1:32 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I like the model backup feature as well. I tried it on the radio I just finished and it worked flawlessly. I will have to take a photo of where I mounted the FTDI adapter and post it later on. I am going to mount it in the same place on my 2 other radios. 2 more switches hmmm - I don't need them at ...
by hackerjoe
Mon Mar 26, 2018 1:30 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

ArduVoice.jpg
I made another sound card its basically 2 but on one board.
I attached a photo of it before wiring it.
Thank you for making sound happen Joao & Mike
by hackerjoe
Fri Mar 23, 2018 5:38 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi all, Ok I ripped everything apart last night after noticing no change on the Arduino led when trying to play a file. :shock: :? :x I may have reversed pins 27 & 28 to the Arduino not sure and also possibly the trims inputs. :oops: The other thing I noticed is that the Aileron switch didn't change...
by hackerjoe
Thu Mar 22, 2018 10:26 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

OK everything is installed and the sound board powers up. I removed OEM beeper and transistor. I get a beep when powering up from ArduVoice. I enabled M'sound serial in hardware mode and changed mode sound to Megasound. How do I setup what file plays for whatever switch is toggled ? Or is that the p...
by hackerjoe
Thu Mar 22, 2018 1:31 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

OK its the pins for the CPU. Thank you I wanted to make sure.
PIN 27 & 28 are ElevTrimUp & ElevTrimDn :D
by hackerjoe
Thu Mar 22, 2018 10:34 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Joao,
Is the photo for the trim connections correct? It looks like 28 and 29 ?
by hackerjoe
Thu Mar 22, 2018 3:01 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

A question on the Trim connections ? In the photo on the first page it says to connect to pins 27 & 28 on the main board but it looks like its actually soldered to pin 28 and 29. I just want to be sure before going ahead and soldering to the resistors. The schematic for 9X radio shows pin 27 & 28 as...
by hackerjoe
Tue Mar 20, 2018 12:48 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I think I got the bootloader and firmware loaded. ( I am not sure how to tell for sure until it installed ) Is the LED supposed to blink after flashing it ? I used a different laptop (Windows 7) that had Bitburner on it. I loaded the Bootloader (EEPROM) first then the Firmware (Flash). I hope that's...
by hackerjoe
Tue Mar 20, 2018 12:03 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

OK I have tried to load the bootloader with my USBasp but nothing can detect the arduino. The USBasp is loaded correctly with the right drivers. I used it to flash ER9X to the radio. I double checked all connections and checked the 6 cable to make sure they are ok. Is there a way to burn the bootloa...
by hackerjoe
Mon Mar 19, 2018 5:53 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Ok thank you I will look into that.
There is also something called ARVdudess as well

Thank you as always
by hackerjoe
Mon Mar 19, 2018 5:03 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi again, I realize this is an old thread but can someone help with loading the bootloader please? I have an Arduino Pro Mini I do not have the completed module in the transmitter yet and figured while I had it out I can install the Bootloader. I have tried using my USBasp programmer with eepe but g...
by hackerjoe
Tue Mar 13, 2018 4:53 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Yes João, I realize that and again I thank you for taking the time out to reply. Just an update. I'm going to build the 2 board design first. I'm working on the Amplifier board and have completed the Arduino board minus connections. I just rechecked my work and noticed I used the wrong value resisto...
by hackerjoe
Tue Mar 13, 2018 1:47 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi João, Sorry, I meant the transistor is in a different spot, you have an extra 10uF Capacitor on the latest diagram you just posted. I don't recall seeing it on the first page, I think there were only a 10uF and 220uF cap on the first-page diagram. I was thinking the voltage regulator was differen...
by hackerjoe
Tue Mar 13, 2018 12:04 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Thank you, João It Kind of does João, I guess its the newest version but I see now you added a 10U Cap and different Transistor ( which I don't have that transistor ) I'm building the 2 board version at the moment and will give that a try before building the single board. One question is do you have...
by hackerjoe
Wed Mar 07, 2018 7:31 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

It should also work with er9x, but it is not an ArduVoice, it is a Megasound board which is parallel. It could probably be modified to work as serial.. I don't have the board though so I don't know the schematic for it.. João Sent from my BLN-L21 using Tapatalk Hi João, Do you have a diagram or pho...
by hackerjoe
Wed Feb 28, 2018 12:53 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hi João, I have been reading through all the posts here and planned to build your 2 board design but see there's a single board design. Which is easier to fit in a 9X? I'm guessing the 2 board design is. Do you have a photo of the back of the single board build & what size is it? ( I see the photo o...
by hackerjoe
Tue Feb 27, 2018 1:31 am
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

I have Er9x - I just noticed it says Works excellent OpenTX
Oh well.
by hackerjoe
Mon Feb 26, 2018 11:05 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 436
Views: 44105

How does this board look - https://oshpark.com/shared_projects/ZFFMBWpj

Hi I was wondering if the board looks ok to anyone? ----- https://oshpark.com/shared_projects/ZFFMBWpj They still sell it. I came across this last night. 3 of them for $4.20 It doesn't include any parts - just a fyi I will have to try and get all the parts for it from China they are so much cheaper ...
by hackerjoe
Fri Feb 23, 2018 1:34 am
Forum: FRSky Telemetry Mods
Topic: FrSky DHT Trace cut or No Trace Cut ?
Replies: 35
Views: 1561

Re: FrSky DHT Trace cut or No Trace Cut ?

ha ha ha I was just warned by the wife not to buy any more stuff off ebay :(

Did I mention she said that in my bad ear ?
by hackerjoe
Thu Feb 22, 2018 7:21 pm
Forum: FRSky Telemetry Mods
Topic: FrSky DHT Trace cut or No Trace Cut ?
Replies: 35
Views: 1561

Re: FrSky DHT Trace cut or No Trace Cut ?

I have a mini, nano and 2 unos :) I have a bad habit of buying more than I need lol. I was going to make a sonar sensor and incorporate an Arduino to automatically retract my Octocopter Landing gear. I looked at you ArduVoice post and would love to try it but I hate waiting for Ebay stuff to show up.

Go to advanced search