Search found 116 matches

by Sterling101
Tue Jun 26, 2018 8:04 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 182
Views: 19098

Re: Ersky9x Bug Reporting

MikeB wrote:
Mon Jun 25, 2018 7:34 am
A9 now posted with that problem fixed.

Mike
Thanks Mike,

Tested and working fine.
by Sterling101
Sun Jun 24, 2018 8:15 pm
Forum: ersky9x
Topic: Ersky9x Bug Reporting
Replies: 182
Views: 19098

Re: Ersky9x Bug Reporting

Found a bug with 222a8 on my 9XR-Pro today at the field I think. I fired up a plane using one of my AFHDS2A receivers which was fine on a5 and it refused to connect to the receiver using the multi module. Initially I thought I may have messed up something with the bind, but it refused to stay in bin...
by Sterling101
Mon Jun 04, 2018 10:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Speaker holder mod for the pro
Replies: 1
Views: 405

Re: Speaker holder mod for the pro

I might have to give this a go and see if it will fit inside my radio with the internal module and associated wiring.

Good job though - with a bit of modding and tweaking it's really easy to get a top notch radio out of these 9XR Pro's isn't it?
by Sterling101
Thu May 03, 2018 7:26 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro battery issue
Replies: 4
Views: 591

Re: 9XR Pro battery issue

I had a similar problem with the "official" protected battery where one cell would drain much quicker than the others. Switched to a normal 3S 2200mah lipo now and have a tx voltage warning set up so no problems with suddenly losing power any more. Protection circuit sounds great on paper but I'd ra...
by Sterling101
Wed May 02, 2018 10:21 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR/9XR pro faceplate mod
Replies: 15
Views: 1011

Re: 9XR/9XR pro faceplate mod

I've been considering doing something very similar to remove the need for the restrictor on the taranis gimbals but you've beat me to it!

Be interesting to have a look over the source files though, just to see how you've done it :)
by Sterling101
Thu Apr 05, 2018 7:14 pm
Forum: Turnigy 9XR PRO radio
Topic: FrSky DHT Module With Telemetry - Anybody Tried It?
Replies: 7
Views: 612

Re: FrSky DHT Module With Telemetry - Anybody Tried It?

Quick update. Tested it again tonight and even on the default settings it's fine? May be had a strange bit of interference last night as I powered both the Tx and Rx on and off a few times last night while testing? Still be interested to know if anyone else has ever had similar though - I did think ...
by Sterling101
Thu Apr 05, 2018 7:07 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR-PRO Hacks and Fixes
Replies: 233
Views: 51809

Re: 9XR-PRO Hacks and Fixes

I have to agree. When I was looking at changing the gimbals in mine I looked into the M9 but decided I didn't want to hack both my radio and the gimbal to get it to fit so went for the PR10 gimbals and I'm more than happy with the way they work. Are they the latest thing with hall sensors? No, but t...
by Sterling101
Thu Apr 05, 2018 6:40 pm
Forum: Turnigy 9XR PRO radio
Topic: FrSky DHT Module With Telemetry - Anybody Tried It?
Replies: 7
Views: 612

Re: FrSky DHT Module With Telemetry - Anybody Tried It?

Strange thing happened while I was setting up the rudder and elevator on my BAe Hawk last night. Bound the D8R-XP to the DHT fine, plugged in the rudder and elevator servos and powered up the receiver and the servo's went crazy! A lot more than just jitter, more like 50% swing about centre on all 3 ...
by Sterling101
Mon Apr 02, 2018 1:35 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Just checked and definitely no scalers doing anything to any value at all.
by Sterling101
Mon Apr 02, 2018 11:50 am
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

The tick is solid at the right of FasV in the logging menu.

Have tried another receiver/sensor and I still see the same problem with the voltage flicking back to 0.0.

No scripts running at all, in fact the test I've just done has nothing other than a bound receiver and sensor.
by Sterling101
Mon Apr 02, 2018 7:24 am
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Sorry about that Mike - I'd completely missed it out!

Here's the log file...
Taranis-2018-04-01-212135.zip
(761 Bytes) Downloaded 25 times
by Sterling101
Sun Apr 01, 2018 9:52 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Just tested on 222a4 and it's still the same. Fast flickering between 16v and 0.0v.
by Sterling101
Sun Apr 01, 2018 9:20 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

The FasV on the AFHDS2A receivers is populated from a different telemetry source to the FrSky ones. Probably where the difference is coming in.
I've just found the new 222a4 release (hadn't realised the test thread was live again) so have uploaded that and will give it a test now...
by Sterling101
Sun Apr 01, 2018 9:03 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

What sensor do you have on the plane? João This one has the FlySky AVT-01 voltage sensor. Same one I've used on a couple of others. Need to do a test on my plane with the CVT-01 voltage sensor and see if that performs differently but that may have to wait until morning as it's buried in the hangar :)
by Sterling101
Sun Apr 01, 2018 8:33 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Did a quick test tonight after doing a bit of rewiring on one of the planes and decided to put a low pack voltage alarm in place. I've noticed that the FasV value seems to be flickering quite a bit. I can almost make out it flicking down to 0.0 but it happens so quick it's hard to tell properly. I'v...
by Sterling101
Sat Mar 31, 2018 6:21 pm
Forum: Turnigy 9XR PRO radio
Topic: FrSky DHT Module With Telemetry - Anybody Tried It?
Replies: 7
Views: 612

Re: FrSky DHT Module With Telemetry - Anybody Tried It?

Well, I think it was a successful install! Ideally I need to get an antenna with a longer fly lead attached but that's not too much of a problem, just hard over the Easter weekend so won't have the replacement until Monday. I did a quick test on the mode switch that comes with the DHT module and for...
by Sterling101
Sat Mar 31, 2018 2:34 pm
Forum: Turnigy 9XR PRO radio
Topic: FrSky DHT Module With Telemetry - Anybody Tried It?
Replies: 7
Views: 612

Re: FrSky DHT Module With Telemetry - Anybody Tried It?

Oh, there is something I still didn't do to my PRO :) Actually, I have a few mods for this radio that I want to try. - Internal module with RF power switch for both modules, controlled bu the firmware. as all my other radios. - Safe main power switch. It will keep the radio ON even if the main swit...
by Sterling101
Sat Mar 31, 2018 1:02 pm
Forum: Turnigy 9XR PRO radio
Topic: FrSky DHT Module With Telemetry - Anybody Tried It?
Replies: 7
Views: 612

FrSky DHT Module With Telemetry - Anybody Tried It?

I'm possibly going to put a FrSky DHT module inside my 9XR-Pro as I want to be able to keep using my Multimodule in the bay but the addition of the genuine module will be handy. I'm going to try and use the internal antenna in the handle for it too, or at least one that will connect to the DHT and f...
by Sterling101
Sat Feb 17, 2018 10:29 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Finally have had chance to fly with the new firmware on the Tx and module and I can report it works perfectly. Pascal has one of my receivers that has caused problems with the stock Global ID to test with but I'm happy enough for now. Everything is working well and the additions of the telemetry ite...
by Sterling101
Thu Jan 25, 2018 7:24 pm
Forum: Turnigy 9XR PRO radio
Topic: DIY Transmitter Tray - Thumb Friendly
Replies: 7
Views: 548

Re: DIY Transmitter Tray - Thumb Friendly

Can you pls show it with the neckstrap/straps attached? Strap has arrived and it works fantastically. So comfortable and I'm able to bend down and move around without it spinning like a top and catching switches and gimbals all the time. Now to see if I can make one that will fit my i10... Will mak...
by Sterling101
Thu Jan 25, 2018 6:03 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Got it and tested. Seems to be reading right now on both voltage sensors.

Thanks for your work on this Mike - makes a massive difference working with kit that I know as well as learning the ins and outs of the FrSky stuff I've got now.
by Sterling101
Thu Jan 25, 2018 3:51 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

OK, the voltage seems ever stranger... I checked my scalers and I had indeed left one in there taking the data from T1 and scaling it and I'd inadvertently left it's destination as VOLTS. So I was seeing the voltage information from the CVT01 sensor AND the scaler from T1 too. Now here's the odd thi...
by Sterling101
Thu Jan 25, 2018 3:07 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

The IDs are "little endian" so are 0100 and 0103. I don't process the 0103 one, so if you are seeing a value displayed with the CVT01, I'm not sure why this is. It seems you have the FasV value being filled in from somewhere else, do you have a scaler set up to write to the FasV value? I'll add cod...
by Sterling101
Thu Jan 25, 2018 11:36 am
Forum: Turnigy 9XR PRO radio
Topic: DIY Transmitter Tray - Thumb Friendly
Replies: 7
Views: 548

Re: DIY Transmitter Tray - Thumb Friendly

I left version 3 printing over night (version 2 was ok, but allowed me to put the finishing touches to it and tweak the strengthening parts) and I think this is the one I'm going with as the "one that works". I added a flat plate that pushes in at the bottom of the radio and holds the front in by li...
by Sterling101
Thu Jan 25, 2018 11:00 am
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Sometimes I love how that happens when you get the DDOS stick after posting! I'll try that again... Voltage Sensors.zip Looking at the raw logs I have just noticed that the sensor ID comes through different between the sensors though. The AVT01 identifies as 0001 and the CVT01 as 0301. They do read ...
by Sterling101
Thu Jan 25, 2018 10:35 am
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Here you go Mike. Two raw logs - one with the FS-AVT01 which reads seemingly to a more accurate decimal level so has the decimal point one digit too far right and one with the FS-CVT01 which reads to a single decimal point but flicks around a bit. I have just had a thought though as I've typed that....
by Sterling101
Wed Jan 24, 2018 11:31 pm
Forum: Turnigy 9XR PRO radio
Topic: Banggood 4in1 module, Flysky AFHDS2A and Telemetry
Replies: 172
Views: 7482

Re: Banggood 4in1 module, Flysky AFHDS2A and Telemetry

Will create some logs in the morning. It seems the sensor is the issue as with the same receiver I get the two different results depending on which sensor I have connected. I can't seem to find any information as to what the difference is between the two sensors other than the connection to the rece...
by Sterling101
Wed Jan 24, 2018 11:13 pm
Forum: Turnigy 9XR PRO radio
Topic: DIY Transmitter Tray - Thumb Friendly
Replies: 7
Views: 548

Re: DIY Transmitter Tray - Thumb Friendly

rsilk49 wrote:
Wed Jan 24, 2018 10:45 pm
Can you pls show it with the neckstrap/straps attached?
At the moment it's just cord as I don't have a double ended strap for it.
I will have one tomorrow though so can take some pictures when it arrives.
by Sterling101
Wed Jan 24, 2018 10:20 pm
Forum: Turnigy 9XR PRO radio
Topic: DIY Transmitter Tray - Thumb Friendly
Replies: 7
Views: 548

Re: DIY Transmitter Tray - Thumb Friendly

jhsa wrote:
Wed Jan 24, 2018 10:15 pm
Nice :)

This is my thumb tray ;)

http://openrcforums.com/forum/viewtopic.php?f=48&t=1454

João
I like it - bit more intricate than my little effort ;)

Go to advanced search