openrcforums

The threadlock was a major success! There were not issues with the pins or screws coming loose which was probably the biggest issue I faced. Any looseness in those points created a ton of vibration. Also, any looseness in the blades created a ton of vibration which threw everything off. If anyone el...

...please tell us about it when you are done! Ps! i´v seen the video of that V950 with 3 blades to. Well, she’s somewhat done. I built her using the rotor head assembly from an XK K123, though it would probably work just as well with the assembly from a V931. The XK parts were just easier to come b...

The only project I have going currently is converting a second V977 I have to operate with three rotors. I purchased the components for the upper assembly of the V931 and plan on configuring them to work with this second V977 to produce a three bladed version. I'm hoping it works out. Only time will...

Do you know if option parts from other helis will work? I'm not sure which aftermarket parts from other helis will work for these birds. The only non-stock part I have for either is a blade 230s canopy for my V950. I know those fit with some minor modification. Beyond that, your guess is as good as...

Do you have an V950 to? I have added my model settings for eepe (not eepsky)for anyone who needs them, use save target as. WL_V977.zip and WL_V950.zip No problem with the reply! It took me quite a few hours to get the mixing done correctly, once I had my module, for proper use with these birds. I a...

But i have a problem with the pitch up, almost full throttle to hover but negative pitch is perfect! Same problem on V950. How to fix that, annyone? Modelsettingsfile for eepe use save target as! w977 settings I did take it out for a spin this morning. First flight had zero issues. Second flight ha...

I can also attach the updated eepm for anyone in need. This one works great. I have tested it out and it works well for my flying style. Minor settings can easily be changed around. As a side note, attempting to open the eepm file on my end also causes an eePskye crash. I'm not sure if its the firmw...

larezwarez, are you having this issue in both standard flight mode and 3D mode? If you are only having this issue in standard flight mode it is likely due to the curve you have on the throttle channel. The RX is preprogrammed with pitch and motor speed in standard flight mode. A curve is not needed....

I posted an eepm file for the V977 in this thread. http://openrcforums.com/forum/viewtopic.php?f=94&t=8954&p=116197&hilit=v977+eepm#p116197 The setting are identical for the V950. There are sequencing steps involved for proper function of all settings with both the V977 and the V950. I b...

Sorry, I couldn't get the file to attach for some reason. I currently have all of my helis, quads, and planes setup on the 9xR Pro with ersky9x and a multiprotocol module. All models have full functionality, though I haven't had time to test all parameters and make adjustments. If you need anything ...

I found that I was having issues with the collective control being on throttle, so I set up the collective for Ch 14 with a curve. The curve can be altered to fit your needs. The eepm file should be attached for anyone in need. What's the trouble everyone is having? As mentioned previously, sequence...

Also wanted to mention... Protocol: Multi KN WLToys RX: 1 I have the model saved in my transmitter currently, but when I have a moment I will upload it to my computer and share am eepm file on here. The basic settings are identical for the V950, for those interesting. They use the same transmitter a...

No need to download. The channel mapping is straightforward. Hello setup: 120 Thr 0 Mixing: Ch1: Ail 100 INV Ch2: Ele 100 Ch3: Thr 100 Ch4: Rud 100 INV Ch5: Ch6: Ch7: Half 100 ID- Ch8: Half 100 !Gea Half -100 Gea Everything else is to your own discretion. The big thing is, with this bird (as well as...