openrcforums

Thanks Mike
I have just ordered a trainer cave.


Sent from my iPhone using Tapatalk

I understand I need a trainer cable


Sent from my iPhone using Tapatalk

Hi
Has anyone used the turnigy 9xr pro with DRL simulator?
If so what need to be done?
david

You may wish to update the ersky9x firmware to a recent "test" version. Providing the firmware in the module is up to date, then you would get status returned from the module. This allows you to use "AUTO" when binding when the required settings are automatically configured from...

Haleluia Changing the sub porotocol to DSMx-22 solve the problem!!!!

Weli I have just recived a new module from banggood (replacment), in this module the green led are illuminated as power is on. If i choose diffrent protocol then multi one of the led blinks. So it seems that the module is allive. In spite of that I was not able to bind the module with my orange reci...

I just recived an internal module (orange one like you have mentioned) and following the aaa file I secsseded binding. The key issue was the protocol change to DSM2 type 9xr-dsm, including inverting com1 in the telemetry setup.
Hope it will help you

Ok, tried that, protocol showed back up along with the 4 sub-protocols (PWM_IBUS, PPM_IBUS, PWM_SBUS, PPM_SBUS) Tried all four and could not bind to the AFHDS2A reliever, through the radio or manually with bind button on module. BTW, should I be trying to bind with the PWM_IBUS to use the single wi...

Hi to all
what will be the best modul for:
Radio - Turnigy 9xr pro
and reciver - Orange R920x V2
david

Mike thanks for all the tips I have tried the mnual bind mode with no sucsess, and the green led did not ilumminated.
My setup in the telemetry is Usr Proto to DSMx there isn't any DSM.
Well do you advice to upload the test frimware? Do I have a fualty Muddole?
David

MikeB wrote:Have you tried DSMX-22?

Mike.

Yes I but will try again today


Sent from my iPhone using Tapatalk

I found the option I entered 9ch (like my Rx), but was not able to bind.

MikeB wrote:What value do you have for "Option"? It needs to be 4 for 4 channels up to 12 for 12 channels.

Mike.

Where do I have the Option? (On which setup page)


Sent from my iPhone using Tapatalk

Hi I am new to this RC world. I have recently bought a Turnigy 9xr pro with Irangaex 4in1 module. I loaded the latest frimware of Ersky9xr version-220. my problem is that I am not able to bind the radio with my OrangeRx R920X V2 9Ch 2.4GHz DSM2/DSMX. In the radio i have setup With in the model setup...

My setup with in the model setup in the protocol: disable the internal module selected external module setup proto to Multi setup protocol to DSM setup Type to DSMX-11 Setup Autobind to Y Yet I am unable to bind with my OrangeRx 920x v2 DSM2/DSMX reciver. Attached please find a youtube video in whic...

Hi I am new to this RC word. I have recently bought a Turnigy 9xr pro with Irangaex 4in1 module. I loaded the latest frimware of Ersky9x version-220. my problem is that I am not able to bind the radio with my OrangeRx R920X V2 9Ch 2.4GHz DSM2/DSMX. In the radio i have setup to multi then dsm dsm2. p...