@mstrens:
ah, ok, I see. I created a calculated field. Works very well. Thanks!
@João:
I use oXs v8.0 and on TX side openTX v2.2.0
Search found 14 matches
- Sat Aug 05, 2017 12:07 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ACS758 with oXs 8 and FrSky
- Replies: 3
- Views: 3271
- Sat Aug 05, 2017 8:09 am
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: ACS758 with oXs 8 and FrSky
- Replies: 3
- Views: 3271
ACS758 with oXs 8 and FrSky
Hi,
I built a openXsensor with a vario and a ACS758 current sensor. The current is transmitted by default and works fine. What do I have to do in oXs_config.h to transmit the consumed milliah?
Thanks for your help.
I built a openXsensor with a vario and a ACS758 current sensor. The current is transmitted by default and works fine. What do I have to do in oXs_config.h to transmit the consumed milliah?
Thanks for your help.
- Tue Sep 04, 2012 12:36 pm
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
bertrand, thank you for the very fast fixing of the issue. will there be an new 'official' release or should i download via svn and compile myself?
joerg
joerg
- Mon Sep 03, 2012 8:02 am
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
same issue with open9x-r1336
at 15A it took only 1min for 1000mAh. this is around 4x to fast.
at 15A it took only 1min for 1000mAh. this is around 4x to fast.
- Sun Aug 19, 2012 7:44 am
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
that is my firmware:
open9x-stock-frsky-nosplash-nofp-potscroll-autoswitch-en.hex
open9x-stock-frsky-nosplash-nofp-potscroll-autoswitch-en.hex
- Thu Aug 16, 2012 4:28 pm
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
yes, that is correct. but my tx shows 1000mAh not 235 mAh at 14.1A.gbirkus wrote: 235mAh(minute) x 60 minutes = 14100mAh(hours) it is 14.1A then it is ok!
- Wed Aug 15, 2012 11:44 am
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
hmm now i see that you use D4RF - there is only RX voltage telemetry value. at rcgroups are some hacks to modify the D4FR for external voltage ;) now on telemetry I see A1=5V, A2=11A, power 550W and consumption still growing mAh. yes, that is ok - but how fast do the mAh grow? for my current readin...
- Wed Aug 15, 2012 8:48 am
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
bdw: A1 need to have voltage from 0-3.3 Volts. If it is used like current what voltage output is on sensor when 0Amp is consumed? 0 or 1.65 V ? for a first test I only measured receiver battery voltage which is divided over the internal voltage divider. later I will use this sensor: http://www.flyt...
- Wed Aug 15, 2012 7:13 am
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Re: Flight Pack Capacity
type is 'none' so current is proportional to measured A1 voltage.gbirkus wrote:what is your current sensor type?
- Tue Aug 14, 2012 11:57 am
- Forum: openTx
- Topic: Flight Pack Capacity
- Replies: 23
- Views: 11341
Flight Pack Capacity
Today I flashed my 9x (frsky mod) with the latest open9x (1195). Then I created a new model, went to the telemetry config screen and configured A1 with range 40.0A, no offset. At UsrData: Proto None and Current A1. After I powered my receiver (D4FR) on with around 4.6V the telemetry display of the t...
- Mon May 21, 2012 9:46 am
- Forum: openTx
- Topic: New features provided by open9x
- Replies: 210
- Views: 81643
Re: New features provided by open9x
The latest er9x (r762) now allows telemetry values as inputs to custom switches (including mAh used), and allso allows unused safety switches to be used to trigger alarms. So you set a custom switch to: SWA: v>ofs Mah1 1792 (or Mah2, the value is inunits of 64mAh) Then you change a safety switch to...
- Mon May 21, 2012 6:39 am
- Forum: openTx
- Topic: New features provided by open9x
- Replies: 210
- Views: 81643
Re: New features provided by open9x
What you will find in open9x (which is not in er9x and gruvin9x)? ... What is still missing in open9x (which is in er9x)? - flight pack capacity used if analog A1 or A2 has current measurement - altitude in metric/imperial units if FrSky hub altitude sensor used hi bertrand, will the flight pack ca...
- Sat Jan 14, 2012 9:19 am
- Forum: er9x
- Topic: Audio Work - Piezo Driver Updates
- Replies: 69
- Views: 37746
Re: Audio Work - Piezo Driver Updates
Found this two speakers in childrens toys. The green one is from a McDonalds toy, the other one from a plush toy. So just seek your childrens toy for annoying loud toys that you always wanted to destroy
- Sat Jan 14, 2012 9:14 am
- Forum: er9x
- Topic: Audio Work - Piezo Driver Updates
- Replies: 69
- Views: 37746
Re: Audio Work - Piezo Driver Updates
Found this two speakers in childrens toys. The green one is from a McDonalds toy, the other one from a plush toy. Just seek in your childrens toys for some annoying loud toys that you always wanted to destroy