Search found 24 matches

by TheCirodi
Mon May 08, 2023 1:15 pm
Forum: Hardware
Topic: Turnigy 9X Upgrading to the ATmega128 CPU Chip
Replies: 3
Views: 7432

Turnigy 9X Upgrading to the ATmega128 CPU Chip

Hello All! Finally I was able to find complete board powered by the ATmega128. I would take advantage from it, since I have currently the 64 version, where I have installed the Smartieparts programmer v 2.4. I have some questions related to the following different scenarios. 1) NO TELEMETRY, WITH JP...
by TheCirodi
Sun Oct 03, 2021 8:24 am
Forum: Hardware
Topic: Turnigy 9X Upgrading to the ATMEGA2561-16AU CPU Chip
Replies: 5
Views: 2939

Re: Turnigy 9X Upgrading to the ATMEGA2561-16AU CPU Chip

Good day João, yesterday eve I found the same supplier you are suggesting. Thanks in any case. Now, the matter is shifted for me and it's more appealing to me the challenge in doing this replacement. Moreover, considering that 9extreme is no more available (to me it is impossible to build one) and t...
by TheCirodi
Sat Oct 02, 2021 1:00 pm
Forum: Hardware
Topic: Turnigy 9X Upgrading to the ATMEGA2561-16AU CPU Chip
Replies: 5
Views: 2939

Re: Turnigy 9X Upgrading to the ATMEGA2561-16AU CPU Chip

Hi João, first of all thank you for helping me. I have now a better idea of the job. I believe I'll be able to find a support for the unsoldering and soldering part. BTW I have a pro heater gun that could work to unsolder and I'm looking at YouTube tutorials for surface mounting soldering. The probl...
by TheCirodi
Sat Oct 02, 2021 10:26 am
Forum: Hardware
Topic: Turnigy 9X Upgrading to the ATMEGA2561-16AU CPU Chip
Replies: 5
Views: 2939

Turnigy 9X Upgrading to the ATMEGA2561-16AU CPU Chip

Hello, I'm a fan of this great radio. Unfortunately I missed to purchase the 9Extreme board......... With the aim to get the best from it I read previous topics on the subject, however, since my limited skills in electronics, I'm struggling to understand if this upgrade would be feasible even to me....
by TheCirodi
Sat Oct 02, 2021 10:01 am
Forum: Hardware
Topic: 9x Radio Rebooting Problem Horizontal Trims Digital Ground Fix
Replies: 0
Views: 1439

9x Radio Rebooting Problem Horizontal Trims Digital Ground Fix

FOTO3.jpg FOTO2.jpg FOTO1.jpg Hello all, I'm back to already discussed matter in different topics with different solutions. Anyway I found interesting what has been posted on an Italian forum (as ref. https://www.baronerosso.it/forum/radiocomandi/298087-segnalazione-urgente-per-i-possessori-di-turn...
by TheCirodi
Sat Aug 07, 2021 12:15 pm
Forum: er9x
Topic: JP4IN1 Multi Prot Transm Module OPTION TO DISABLE CHANNEL REMAPPING
Replies: 1
Views: 2694

Re: JP4IN1 Multi Prot Transm Module OPTION TO DISABLE CHANNEL REMAPPING

Just to inform you all that MikeB released a new firmware release that has this feature.
Thanks a lot, Mike
by TheCirodi
Tue Aug 03, 2021 9:34 am
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 145
Views: 114975

Re: 9Xtreme being released to the public domain (opensource)

I am interested in one that is assembled.
by TheCirodi
Sat Jul 31, 2021 9:52 am
Forum: er9x
Topic: JP4IN1 Multi Prot Transm Module OPTION TO DISABLE CHANNEL REMAPPING
Replies: 1
Views: 2694

JP4IN1 Multi Prot Transm Module OPTION TO DISABLE CHANNEL REMAPPING

Hello, would it be possible to add a "Disabling Channel Re-Mapping" option, selectable at model setup level in one of the next revisions, if any? As Pascal well pointed out: "You can disable channel re-mapping If you prefer to configure the channel order yourself, or if channel re-map...
by TheCirodi
Sat May 22, 2021 4:30 pm
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Re: Turnigy 9X THROTTLE WARNING

So Mike, now it's clear. There was an overlapping of my errors. 1) bad calibration that impacted all the models 2) error (I don't know how I did it) when i setup a dummy model to test the multiproticol module. I'll check where is the "Throttle Default" position setting to learn and avoid. ...
by TheCirodi
Sat May 22, 2021 2:06 pm
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Re: Turnigy 9X THROTTLE WARNING

Mike, 1) When on the throttle warning screen, moving the ele stick fully both ways doesn't remove the warning. 2) When on the throttle warning screen, just moving the throttle stick removes the warning. 3) I here attach the downloads. 4) loading new EEPROM, after stick calibration, warning is OFF wh...
by TheCirodi
Sat May 22, 2021 5:27 am
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Re: Turnigy 9X THROTTLE WARNING

@ Mike

Mike,
to exclude hw caused issues, could you share with me a clean working er9x configuration (without any model)?
I could upload it on my Turnigy 9x and check if the warning is still active.

Please let me know.
Thanks lot!
by TheCirodi
Fri May 21, 2021 8:36 pm
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Re: Turnigy 9X THROTTLE WARNING

I don't know if I understood you, but I have not sounds installed and the welcome screen appears correctly just before the warning.
Is there a way to download the radio setup with eepe to analyze it?
Thanks!
by TheCirodi
Fri May 21, 2021 12:08 pm
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Re: Turnigy 9X THROTTLE WARNING

Hi Mike, I did it and now it goes from -100 upto 100, however the error message is still active at start and, still, the counter on THs is stopped when I bypass the error message without touching the stick.
Strange indeed...
Thanks!

Sergio
by TheCirodi
Thu May 20, 2021 6:22 pm
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Re: Turnigy 9X THROTTLE WARNING

1) Pulling down ELE stick the warning doesn't go away
2) throttle idle A2 00A6 -98
throttle max A2 07D3 100
Thank you for taking care.
Regards,

Sergio
by TheCirodi
Thu May 20, 2021 9:16 am
Forum: Hardware
Topic: Turnigy 9X THROTTLE WARNING
Replies: 12
Views: 7282

Turnigy 9X THROTTLE WARNING

Hello, I have my Turnigy 9x with the original ATmega64 chip flashed with Er9x-pxr822 FW. Recently I started experiencing an issue when I switch on the radio: I'm getting always the throttle warning message even if the throttle is in the proper zero/idle position. To override I simply press a key as ...
by TheCirodi
Tue Apr 02, 2019 6:29 am
Forum: er9x
Topic: ER9X WITH ORANGE DSM2/DSMX MODULES
Replies: 2
Views: 3714

Re: ER9X WITH ORANGE DSM2/DSMX MODULES

Thanks a lot, Mike.
Thanks God that you exists.

Sergio
by TheCirodi
Mon Apr 01, 2019 2:30 pm
Forum: er9x
Topic: ER9X WITH ORANGE DSM2/DSMX MODULES
Replies: 2
Views: 3714

ER9X WITH ORANGE DSM2/DSMX MODULES

Hello, before posting I tried by myself through the manual and reading previous posts, but still I need a clarification. I hope to get it with your help. I have the following: er9x version: V1.747-mike er9x-r820 protocol as per the following image IMG_20190401_160525a.jpg Well I want to us Orange mo...
by TheCirodi
Wed Mar 27, 2019 8:02 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Tandem rotor helicopter
Replies: 7
Views: 11001

Re: Tandem rotor helicopter

Mike,
sorry for the late reply.
All three (pitch, roll and yaw).
Thanks.

Sergio
by TheCirodi
Fri Mar 22, 2019 12:27 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Tandem rotor helicopter
Replies: 7
Views: 11001

Re: Tandem rotor helicopter

Mike,
I have been too much optimistic.
There is no way to get the help of a gyro.
This is the real limit with helicopters.
Cheers,

Sergio
by TheCirodi
Wed Mar 20, 2019 8:45 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Tandem rotor helicopter
Replies: 7
Views: 11001

Re: Tandem rotor helicopter

Mike, I here attach EEPE MODEL where I implemented your hints. I simulated it and corrected your setup about pitch, "add mixes to channels 3 and 6" and reversed the weights as follows: CH3 -100% Ele CH6 +100% Ele Motor is on CH7 with Throttle Cut. On CH8 will go gyro gain control. I simula...
by TheCirodi
Wed Mar 20, 2019 7:10 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Tandem rotor helicopter
Replies: 7
Views: 11001

Re: Tandem rotor helicopter

Mike, your understanding is correct. ASAP I'll setup the mechanics and I'll test your program. In the meantime, I'll simulate it with eepe. This is another proof that ER9X is truly powerful and unique. People who purchase famous branded radios, get less, spending much more...... I'll feedback my res...
by TheCirodi
Tue Mar 19, 2019 3:20 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Tandem rotor helicopter
Replies: 7
Views: 11001

Tandem rotor helicopter

Hello. I’m putting together a flybarless-variable pitch, 3-blades per head, tandem helicopter, 450 class, Boeing Vertol CH-46/47 style. The configuration will be as follows as per the attached picture. I need to manage the 6 servos and motor. Taking advantage of the powerful ER9X firmware I would li...
by TheCirodi
Wed Jan 11, 2017 10:56 am
Forum: Template Library
Topic: Blade 400 3d hell
Replies: 3
Views: 10502

Re: Blade 400 3d hell

Hello,
I would appreciate using your setup, but I'm not able to open it with EEPE (already renamed as *.hex, *.eepe, *.eepm, *.bin).
Thanks.
by TheCirodi
Wed Jan 11, 2017 10:20 am
Forum: er9x model setup
Topic: Help to setup a BLADE SR with DDVP modification
Replies: 0
Views: 5905

Help to setup a BLADE SR with DDVP modification

Hello All, I'm really new to helicopter setup and I hope to find somebody willing to help me in the following matter. I have a Turnigy ER9X flashed with er9x-r820 a DSM2/X module + receiver. I have a Blade SR that I mechanically upgraded to Direct Drive Variable Pitch (so I have a separated ESC to d...

Go to advanced search