Search found 8 matches

by strgaltdel
Sun Jan 08, 2023 8:59 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: sensor conflict: how to change SPort AppId ?
Replies: 1
Views: 1439

Re: sensor conflict: how to change SPort AppId ?

found a way to change the appid into a completely other diy range ...Frsky.cpp file: fieldID const uint8_t fieldId[24] = { 0x10 , 0x11 , 0x30 , 0x30 , 0x30 , 0x21 , 0x20 , 0x60 ,0x90, 0x91 , 0x80, 0x80 , 0x82 , 0x83 , 0x84 , 0x85, 0x85, 0x50 , 0x40 , 0x41 , 0xA0 , 0x70 , 0x71 , 0x72 } ; //fieldID to...
by strgaltdel
Sun Jan 08, 2023 4:07 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: sensor conflict: how to change SPort AppId ?
Replies: 1
Views: 1439

sensor conflict: how to change SPort AppId ?

Hi, i'm using oXs with "GPS number of sats & hdop" configured So these sensors occupy appId 0x400 resp. 0x410. Now i'm using an YGE ESC which is using 0x400 for temperature too. Tx is announcing sensor conflict every x seconds ))-: There is no chance to change anything on YGE side. So ...
by strgaltdel
Mon Sep 04, 2017 5:48 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: neo7"mini" variant will not work
Replies: 8
Views: 5716

Re: neo7"mini" variant will not work

Maybe that's the cause: https://www.u-blox.com/en/counterfeit-products-and-u-blox-brand-misuse another odd description : "GPS is customized for NAZE32/F3 Flight control board Internal Ublox 7 series chip core of manufacture OEM" In case you're interested in further investigations i can sen...
by strgaltdel
Sun Sep 03, 2017 2:49 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: neo7"mini" variant will not work
Replies: 8
Views: 5716

Re: neo7"mini" variant will not work

Obviously the device parameters can't be changed i had no problems to change baud rate from the older one GPS's by using u-center (different rates cross-checked with putty) The newer ones (without compass) stay on 9600, independent from what u-center sent to the device. :o Also, the typical poll fun...
by strgaltdel
Sun Sep 03, 2017 10:33 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: neo7"mini" variant will not work
Replies: 8
Views: 5716

Re: neo7"mini" variant will not work

Thanks for assistance ! I checked the default Baud rate by using putty: it's the usual 9600. Furtheron i gave the Ardu a fixed 5.5V Source to rule out, that a "bad supply" would lead to signal levels "on the edge". (but guessing the neo works with 3.3v too?) Next step was to modi...
by strgaltdel
Sat Sep 02, 2017 6:19 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: neo7"mini" variant will not work
Replies: 8
Views: 5716

Re: neo7"mini" variant will not work

The problem occured by using an "old fashioned" firmware, app. 18Month old (-; i tried Rev 8.01 too, getting the same result. https://github.com/openXsensor/openXsensor/wiki/OXS_Downloads My bet is, that this "special kind" of gps doesn't accept the initial commands, given by the...
by strgaltdel
Sat Sep 02, 2017 10:36 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: neo7"mini" variant will not work
Replies: 8
Views: 5716

neo7"mini" variant will not work

Hi, after building app. 10 Sensors, using GPS devices like neo7"mini", neo7, neo m8n it's the first time i run into trouble. my last buy of a neo7 "mini" was this kind of type www.ebay.de/itm/Mini-GPS-Ublox-7-Series-for-NAZE32-Flight-Controller-Quadacopter-NO-Compass-RC309-/27245...
by strgaltdel
Thu Jan 05, 2017 7:02 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: lua script for performance measurements
Replies: 0
Views: 2915

lua script for performance measurements

Hello, attached you can find a lua script which i've built for simple ealtime performance measurement purposes by using the openXsensor (including altitude & airspeed sensor). The script is designed to run with oTx 2.2 (tested on RC8) / Taranis transmitters. How it works: Without further configu...

Go to advanced search