openrcforums

My 6 position switch worked fine for a short while and then it reverted itself into a 3 position switch. I thought it must be my soldering and resoldered it. Still the same. I thought ok, I will put in a proper connector ( JST-SH ) onto the board. Still the same. I then thought maybe I've damaged th...

It looks like sticky switch can't be assigned any on/off audio or am I just thick. (don't answer that, lol)

Sorry it should read position 1 at start jumps to position 3 and misses out position 2.

I have checked for that and its already set to multipurpose switch. Heres an update. I've been back into the Taranis and resoldered the joints. Now on the calibration screen starting from position 1 = -100, then on position 2 it goes half way up the scale, position 3,4,5,6 are as they should be. I h...

Many thanks for the info. Sorry for the delay and VERY much appreciated

Hi, I'm new to the forum and I am looking for advice on fixing my 6 postion switch. I successfully fitted the switch and it worked fine for a couple of months. It suddenly changed from a 6 switch to a 3 position switch. My first thoughts were the switch itself had failed and purchased a new one. Aft...

I have assigned my sticky switch the led's to on and off. If anyone know's how to put audio," led's on " and then " led's off " to the switch ? Would they be kind enough to post please. I've tried lots of combinations and I always get " led's on " and " led's on&qu...

Hi everybody,

I'm busy setting up my Taranis and would like set up the SH switch to turn my LED's on and off.

If possible to also to announce, " Lights on and Lights off ". Any help would be greatly appreciated.

Many Thanks,J.J.