openrcforums

I need to produce my own props and frames. (in another life, I am a fiberglass tech) All of the RC suppliers produce props for racing, speed and bite. I need maximum efficiency and ultra lightweight. are there any advanced molding plastics designed for this purpose? cheap plastics suck with harmoni...

Also, you aren't really using a naze32. Your using a Seriously Pro F3 board, which is just based on the Naze32.

Sent from my SM-G900V using Tapatalk

You should be able to use BetaFlight, loading the SPRacing F3 file via Load Online.

Sent from my SM-G900V using Tapatalk

First there was TH9X. This was then developed as er9x (by Erez). I got involved with er9x, did some developments on it, then took over the development when Erez stopped. Bertrand also did some developments on er9x, then decided to fork from it and do openTx. So many of the basic ideas of openTx and...

Also, the cc3d and the Naze32 are completely different boards. Do you have a picture or do you know which one you are using?

Sent from my SM-G900V using Tapatalk

I cannot load(and Flash) the Cleanflight firmware to my CC3D NAZE board.It seems to me the problem is the connections I made between the main port of the board between the FTDI Adapter. When I understand it well I have to connect Ground to Ground,TX to RX. RX to TX My FTDI Adaptor(AliEpress) has th...

Here are some pictures I took as well, in order to try to see things better.

Hey all, everyone has been so helpful that I thought I would ask here. I recently purchased the "RTF TOTAL DISTRIBUTION TOTAL WITH OSD" Link: http://www.readytoflyquads.com/rtf-total-distribution-total-with-osd The issue is that the board is labeled poorly, as the writing is small and it u...

I stand corrected - short press of exit does clear...briefly though. Happens very fast. I also noted whatever the number is for max is incorrect. I have 45 as max right now and the actual alt was 14.9 - looked straight at it. Absolutely could not be 45 feet because my warehouse peak is only 25 feet...

I stand corrected - short press of exit does clear...briefly though. Happens very fast. I also noted whatever the number is for max is incorrect. I have 45 as max right now and the actual alt was 14.9 - looked straight at it. Absolutely could not be 45 feet because my warehouse peak is only 25 feet...

So, back to the Naze32 for a moment. All I really want is my pack voltage, lol You could use the FrSky SP-FLVS - Smart Port Lipo Voltage Sensor : (https://alofthobbies.com/frsky-sp-flvs-smart-port-lipo-voltage-sensor.html) using S.Port to get your pack voltage. This is how I get model pack voltage ...

jhsa wrote:The naze is probably sending the telemetry using "FasV", not A1 and A2??

João

Not getting anything on FasV.

Sent from my SM-G900V using Tapatalk

So, back to the Naze32 for a moment. I adjusted the values like mentioned above, but the readings are static. A1 is always 4.9-5v and A2 is always 11.1 to 11.3v. Going to play around with some values today to see if I can get it to work.

All I really want is my pack voltage, lol

So slight off subject, if I need to do a new post I will. Goal - To figure out/set up the Telemetry so I can see my current battery or average cell voltage. Telemetry is working great! So far I have figured out that: RSSI - Signal Strength (I would say obviously, but it wasn't so obvious to me when ...

Wow, I feel sort of silly now. That's exactly what it was. Radio was on Com Port 2.

Ok, still not working, here are my settings, ect:

The er9x manual was written for er9x. You are using ersky9x which has many more features. So the manual is quite up to date as far as er9x is concerned :) A manual for ersky9x is being written, but it might take a while until is ready. João João, Thanks for the info! The work everyone has done on t...

The more I work on this, the more I think the issue may be that it never flashed properly. When I'm in eePskye > Preferences > Current Version always reads R1, regardless if I download/update. Is this a factor? EDIT: eePskye version 419, Jan 8, 2016 eePskye Pref.jpg EDIT 2: I'm assuming that if it f...

Before I ask my question, let me throw my specs/hardware out there: Quadcopter Flight Controller: Naze32 Acro Rev6 running BetaFlight 3.0 Radio/Transmitter: Turnigy 9Xtreme (9X mod from Steven/SmartieParts) with ersky9x9XT_rom Rev 218. ( Link ) Radio/Module: FrSky XJT Receiver: X4R-SB ( Link ) Goal:...