Search found 21 matches

by zipray
Wed May 10, 2017 1:57 pm
Forum: OpenLRSng
Topic: MULTIPROTOCOL support for openLRSng
Replies: 1
Views: 3548

Re: MULTIPROTOCOL support for openLRSng

hi mikeller,This firmware need to hardware modification?
by zipray
Sat Jan 07, 2017 10:33 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

The only time the Pro Mini sends a RSSI value is if IO6 is connected to ground. If this is done, then it operates differently anyway, it is mounted in the Tx and provides direct SPort data to the radio. This is for use with other Tx modules and receivers where the raw mavlink data arrives at the tr...
by zipray
Fri Jan 06, 2017 1:15 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

Thanks mike, how can i prohibit send rssi values in the "APM_Mavlink_to_FrSky"code?If i enable "s.prot", then the receiver has been sent the rssi.
by zipray
Fri Jan 06, 2017 9:04 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

This is the "RAW log”
by zipray
Fri Jan 06, 2017 8:47 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

In the protocol menu, i am -50 value for the "Freq" under FrskyX option.Also, I found that the problem is not in the Multiprotocol module.Because I use flight control output s.prot directly to XSR receiver, everything is ok.Abnormal log files is due to I click the menu button in the debug interface,...
by zipray
Fri Jan 06, 2017 8:28 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

MikeB wrote:There may be a problem with the Multiprotocol module. In your logfile, there are some places where no actual telemetry data is sent to the radio for a significant time.
In the protocol menu, what value do you have for the "Freq" under FrskyX?

Mike.
thanks mike.
by zipray
Wed Jan 04, 2017 8:13 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

transmitter:9xr pro(ersky9xProvR221a4 firmware)
Tx module:Multiprotocol TX Module(1.6 firmware)
receiver:frsky xsr
flight controller:sparky(dRonin GCS firmware 16.9)
arduino pro mini 5v 16mhz(APM_Mavlink_to_FrSky)
by zipray
Wed Jan 04, 2017 4:21 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

Mike.thaks you.
by zipray
Wed Jan 04, 2017 4:17 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

Please configure a switch to enable telemetry logging, then, from the main display go UP LONG, then RIGHT until you get to the DEBUG menu. Go down and tick the "Raw Logging box". Now, with all the telemetry connected and operating, turn logging on for 20 to 30 seconds, then turn it off. Locate the ...
by zipray
Fri Dec 30, 2016 1:27 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

MikeB wrote:What voltage level do you have on IO6 on the Pro Mini?

Mike.
I connect 5v voltage on the VCC pin of pro mini,No matter whether io6 grounding,the rssii signal is always jumping.
by zipray
Thu Dec 29, 2016 11:32 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 573
Views: 47979

Re: Adding MAVLINK support

hi mike.When I connect the XSR S.port to pin 5 on my Pro Mini, the telemetry works, but the RSSI oscillates between 90 and 40, with about a 5 second cycle. When I disconnect it, it stays rock solid at arount 90.How to ban mavlink rssi parameter?Only use rssi frsky receiver.
by zipray
Fri Oct 07, 2016 12:08 am
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

Re: FrskyX Smartport telemetry supported on er9x for 9xr?

I think he means an "Artificial Horizon" like on real aircraft. :) João Thanks João,You understand me,The FC has output attitude Angle by setting the FrskyAccelData source,And I found that HDG direction and FrskyAccel-z axis almost the same on the Fixed wing aircraft.if HDG on behalf of the directi...
by zipray
Thu Oct 06, 2016 10:16 pm
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

Re: FrskyX Smartport telemetry supported on er9x for 9xr?

So they are using T1, not T2, and encoding the information differently. It makes it quite difficult when there isn't a common standard. You could display T1 on a custom telemetry screen to, at least, see the information. I don't want to add specific code to handle another variation of non-standard ...
by zipray
Wed Oct 05, 2016 12:30 am
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

Re: FrskyX Smartport telemetry supported on er9x for 9xr?

The serial input is pin 2 of the processor, also used as MOSI to the connector used for flashing. If just using the MULTI module, then you may connect pin 5 (bottom pin) of the module connector to this pin. I would suggest including a 470 ohm resistor in the connection. The MULTI module then sends ...
by zipray
Mon Oct 03, 2016 2:18 am
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

Re: FrskyX Smartport telemetry supported on er9x for 9xr?

Thanks Mike.I've found the "Frsky Mod Done" option, and I haven't put the bottom of the module pin connector to connect to the serial input processors.They are now using TTL - 232 to connect to the fuatba interface.The original method is to use XJT rs232 port by futaba interface telemetry.How do I c...
by zipray
Sat Oct 01, 2016 11:54 pm
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

Re: FrskyX Smartport telemetry supported on er9x for 9xr?

1.jpg Thanks Mike.Just like this,I have installed Banggood multiprotocol module, soldered the tx and rx jumpers,Compiling and Programming both the inverted/non-inverted telemetry two firmware of Multiprotocol v1.1.4 version.and Then I change TX to the er9x-128 version in the er9xProv821g_multiDSM-2...
by zipray
Sat Oct 01, 2016 10:36 am
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

Re: FrskyX Smartport telemetry supported on er9x for 9xr?

Thanks Mike. I have done the telemetry mod to the 9XR,and the processor is a mega128。just Can be brush er9x - frsky.
by zipray
Sat Oct 01, 2016 2:06 am
Forum: er9x
Topic: FrskyX Smartport telemetry supported on er9x for 9xr?
Replies: 15
Views: 1397

FrskyX Smartport telemetry supported on er9x for 9xr?

I am trying to get Smartport telemetry from my XSR and sparky. I am using a turnigy 9xr . I am also using multiprotocal module with Fryskyx protocol .I have FryskyX with Type CH_16 set in Serial multi . But UsrProto just to be set FRHUB havn't frsky.I've tried it in both FRHUB and WSHhi but still no...
by zipray
Tue Sep 06, 2016 3:43 pm
Forum: er9x
Topic: er9x development
Replies: 3012
Views: 227657

Re: er9x development

Thanks Mike.I found the way to modify NumRX first, different receiver to avoid using the same NumRX, secondly, I change the option number is, my compatible satellite receiver with 8, F701 receiver with 7, support DSMX choose DSMX. MULTI added some protocol, and optimized.My module using serial works...
by zipray
Tue Sep 06, 2016 12:39 pm
Forum: er9x
Topic: er9x development
Replies: 3012
Views: 227657

Re: er9x development

I have installed a Multiprotocol-TX-Moduleand on my 9xr。It 's always drops the when i using DSMX binding to compatible receiver。
SVN: er9x-r820 loaded
Version: V1.542-Mike
by zipray
Sun Sep 04, 2016 12:16 pm
Forum: er9x
Topic: Er9x test versions
Replies: 7
Views: 20023

Re: Er9x test versions

Hello Mike Magic Mike, salute to you. I have installed on my 9xr with a Multiprotocol-TX-Moduleand.it's working really good in Serial mode. Version: V1.542-Mike SVN: er9x-r820 date 04.27.2015 mod: FRSKY - NT I want to know, can I use the futaba simulator interface to connect the bluetooth module rec...

Go to advanced search