Search found 33 matches
- Sun Jun 11, 2017 9:53 am
- Forum: Hardware
- Topic: 9xr pro , YAW input when throttle up ?!
- Replies: 10
- Views: 8378
Re: 9xr pro , YAW input when throttle up ?!
same here with hobbyking, sent me a new one and I get to solve the pot problem , so got 2 9XR working fine
- Fri Feb 17, 2017 10:01 am
- Forum: erskyTx (was ersky9x)
- Topic: Range Issue : where does it come from ? 9XR / RX / TX ?
- Replies: 3
- Views: 4390
Re: Range Issue : where does it come from ? 9XR / RX / TX ?
Already started this test protocol
Have change my antennas and ordered some new X4R
I guess I will try to find someone with 9xr and xjt close to me.
Have change my antennas and ordered some new X4R
I guess I will try to find someone with 9xr and xjt close to me.
- Fri Feb 17, 2017 9:33 am
- Forum: erskyTx (was ersky9x)
- Topic: Range Issue : where does it come from ? 9XR / RX / TX ?
- Replies: 3
- Views: 4390
Range Issue : where does it come from ? 9XR / RX / TX ?
Hi everyone, I got some new issues on my RX/TX transmissions: Set Up: Helix , F3 FC on BF3.1 , Sbus actived and OK X4R-SB on EU LBT , worked Ok on previous quad 9XR Pro on ersky9x r220 XJT module with EU LBT fw, used with a 5dbi antenna since 6 months So i used to have an XSR on this quad , worked f...
- Thu Jan 12, 2017 9:49 pm
- Forum: Hardware
- Topic: 9xr pro , YAW input when throttle up ?!
- Replies: 10
- Views: 8378
Re: 9xr pro , YAW input when throttle up ?!
I think it is from the hardware. Because it went normal yaw throttle when I played with the gimbal on his yaw axis
- Thu Jan 12, 2017 9:42 pm
- Forum: Hardware
- Topic: 9xr pro , YAW input when throttle up ?!
- Replies: 10
- Views: 8378
Re: 9xr pro , YAW input when throttle up ?!
There is clearly something wrong.
I deleted the rud channel 4 and make it again. It is still wrong.
Yes the yaw values change when i throttle
I deleted the rud channel 4 and make it again. It is still wrong.
Yes the yaw values change when i throttle
- Thu Jan 12, 2017 8:16 pm
- Forum: Hardware
- Topic: 9xr pro , YAW input when throttle up ?!
- Replies: 10
- Views: 8378
9xr pro , YAW input when throttle up ?!
Hello, I think I got a defective gimbal on my turnigy 9xr ? When I apply throttle Y get a right rudder input ( YAW) on mode 2 . Here is the video : https://youtu.be/2Xk7O0XXsU4 what do you think ? Can I correct it without changing the gimbal ? If it's the gimbal , How do I protect the next one ? My ...
- Tue Sep 06, 2016 9:37 pm
- Forum: erskyTx (was ersky9x)
- Topic: Voice Packs for Ersky9x
- Replies: 132
- Views: 175461
Re: Voice Packs for Ersky9x
yeah now I see it
- Tue Sep 06, 2016 9:08 pm
- Forum: erskyTx (was ersky9x)
- Topic: Voice Packs for Ersky9x
- Replies: 132
- Views: 175461
Re: Voice Packs for Ersky9x
ok sorry for my bad english ... and my dumb person ^^ , I was telling you to put a link of TTS as you did in the first line , in BIG BOLD RED police ^^ that I didn't notice ....
- Tue Sep 06, 2016 5:15 pm
- Forum: erskyTx (was ersky9x)
- Topic: Voice Packs for Ersky9x
- Replies: 132
- Views: 175461
Re: Voice Packs for Ersky9x
Hi joao !
Thanks it worked !
I found the "welcome.wav" file in système folder 1nd changed it too.
Volume is louder.
Maybe you should change the 1st post link to open tx speaker ?
Thanks !
Thanks it worked !
I found the "welcome.wav" file in système folder 1nd changed it too.
Volume is louder.
Maybe you should change the 1st post link to open tx speaker ?
Thanks !
- Tue Sep 06, 2016 11:38 am
- Forum: erskyTx (was ersky9x)
- Topic: Voice Packs for Ersky9x
- Replies: 132
- Views: 175461
Re: Voice Packs for Ersky9x
thanks joao and mike for this voices pack and tutorial ! I got a volume issue : The welcome message is loud and clear but all the alarms and name model voices a quite low. I don't know how to rise it . I made models names and alarms message myself with opentx speaker. I Set volume of OTxS on 100 and...
- Mon Sep 05, 2016 7:48 pm
- Forum: ersky9xr
- Topic: 9xr Pro + XJT module telemetry problem
- Replies: 17
- Views: 10532
Re: 9xr Pro + XJT module telemetry problem
Posting just to say thanks too both of you. I had my RTC at zero too and telemtry was only working when changing model . But now I set up time it works :) I don't know if you remember mike , I was the one who couln't update xjt through Sport . Maybe that was the reason ? Thanks anyway for this post ...
- Wed Aug 24, 2016 9:01 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Ok , I had the info for the diode , will try this week ! Thanks again MIKE Just to update : I managed to update all by FTDI USB . I had to get to it twice , on 2 different days because this timing thing is really tricky ^^ Do XSR, XJT and X4RSB all updated trough Sport . Still don't know why 9XR wou...
- Tue Aug 23, 2016 9:45 pm
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Ok, a friend of mine wil give me a ftdi , for trying the flashing. DO you know if Sport is 3.3v or 5V ? thanks
- Tue Aug 23, 2016 11:04 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
same here.
Bout
Bout
- Tue Aug 23, 2016 8:29 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Ok , So For TelRXCount , no pb, it's counting ( fast ). For SWR , still the same : Just after a boot, Swr =0 and solid , but when I switch models , it says 40 something and change if I wrap my hand on the antenna . ( I Kept only one model, deleted all others and copy it to have a double ) It's like ...
- Tue Aug 23, 2016 4:54 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
I'm sorry to bother you again , but I flash the test rom , but it do nothing when I powered it up (I mean that no pop up, it's a normal power up , with loading screen , then display my normal telemetry screen of my model) I went to telemetry but I lost voltage ( heard a "reboot") and then ...
- Mon Aug 22, 2016 9:05 pm
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Impossible to do it with arduino so I will get a true FTDI232 chip to do it ot buy a frsky cable.
Last chance , I saw that telemetry was COM 2 so i corrected id , maybe a paramater is still wrong and prevent to flash anything on Sport ?
Can you check one last time please ?
Last chance , I saw that telemetry was COM 2 so i corrected id , maybe a paramater is still wrong and prevent to flash anything on Sport ?
Can you check one last time please ?
- Mon Aug 22, 2016 8:23 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Ok , I got an brand new arduino nano v3 , I may also trying to flash my Xjt and XSR with it . I have to find a tutorial of info about if somebody already did it.
- Mon Aug 22, 2016 8:08 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
When data is send on the smart port appart from flashing function ? => Could I check that there sata on my smartport ?
- Mon Aug 22, 2016 7:43 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
I can't find someone with the same problem than me.. I really don't understand. I think I will try a complete erase of the 9XR , maybe a change a setting that **** the flashing portocle on Sport.
- Mon Aug 22, 2016 7:36 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
? There was no original battery with the turnigy 9xr , hobbyking says lipo 3S for this radio ?
When I tried flashing XJT , it was of course powered by the radio, but nothing changed, Device was not found.
When I tried flashing XJT , it was of course powered by the radio, but nothing changed, Device was not found.
- Mon Aug 22, 2016 6:35 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
I was wondering : Can the TX lipo has anything to do with this problem ? I am using a 3S lipo (s*** brand) , Tx says 11.2V when I was trying to flash.
(I may be totally wrong , As I tried to flash XSR by powering it on 5V from FC )
(I may be totally wrong , As I tried to flash XSR by powering it on 5V from FC )
- Fri Aug 19, 2016 4:48 pm
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Yes I deleted all model ; just letting 3 all in PPX D16.
I tried binding with XJT button and by slecting BIND , Yes module bip and vibrate , led flash.
Still won't bind. FW Won't flash either
I tried binding with XJT button and by slecting BIND , Yes module bip and vibrate , led flash.
Still won't bind. FW Won't flash either
- Fri Aug 19, 2016 1:40 pm
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
No it was not on my 1rst config ( bind with a X4RSB) , TelRXcount 0000 0101
BUT : when i'm changing model , it count . even after a reboot , SWR =0 but telrx counting. I have no receptor bind with this model.
Led of XJT is fix red and green flashing.
BUT : when i'm changing model , it count . even after a reboot , SWR =0 but telrx counting. I have no receptor bind with this model.
Led of XJT is fix red and green flashing.
- Fri Aug 19, 2016 11:45 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Yes SWR it's always 0 . When I wrap it with a metal tube , it beeps , but swr is still 0 When I create a new profil/SETUP SWR seems to work propely ( values change) but after a restart , SWR=0 ?? Ok I will try R219t thanks mike for your help EDIT : XJT has been made on 2015-09-19 ( written on it... ...
- Fri Aug 19, 2016 11:11 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Yes the led goes off when a switch 9XR off , then goes red fix when powering back ON. This is my setting : https://goo.gl/photos/6ChXYMC434kv4F8b6 IDK if I use it normally ^^ . SWR ? how do you check it ? I tried it with hand wrapped , but nothing move, still searching for device. I also tried to fl...
- Fri Aug 19, 2016 9:15 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Yes I am powering it . I followed every steps of this : http://thrustworx.com/frsky-xjt-firmware-flashing-using-turnigy-9xr-pro/ The LED on the XJT is Red Fix. But the 9XR says "finding device" without moving. Apparently , my XJT is an EU from end 2015 , beginning 2016 . It may be locked ,...
- Fri Aug 19, 2016 8:23 am
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
Do you think it would change something if I flash my 9XR with open TX instead of Ersky9x r218 ?
- Thu Aug 18, 2016 10:22 pm
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
I bought it on Ebay , not new from a seller not in the professionnal business ... so I don't know.
I tried to upload XSR , but same . Block at finding device
I tried to upload XSR , but same . Block at finding device
- Thu Aug 18, 2016 9:07 pm
- Forum: openTx
- Topic: SPort device updating
- Replies: 98
- Views: 64774
Re: SPort device updating
hello mike , I tried to flash the XJT module from 9XR pro with ER9X 218 and I can't do it : Booting in maintenance mod , select update sport. Powering off select my firmware and confirm waiting bar a finding Device Powering On Nothing happen , not event a bip for the module . Even tried by disconnec...