openrcforums

i can now receive telemetry .... it was an issue with the Mission planner setting

Telemetry Setting - ArduC, ..... I'm using them as source to setup logical switches and on mixes to change a source Input (example thr curve)

DiagSwitch looks ok to the stick movement .... I receive RSSI and RX

used before 9xr-pro with XJT module and X8R receiver,
on x9e I use the internal module and I loaded latest revision R221a4 (03-Jan-17)

I'm using an ardruino mini that was working previously on a 9xr. it is not showing telemetry on the X9e When I'm trying to setup a mix on some switches the output is not equal to the stick movement. examples switch SF retuns: off position = SF / on position SG(up) Switch SH shows: off position = L1 ...

Did someone test the x9e firmware ?
I' m having some issues with the switches and telemetry is not showing data.

I've tested the setup for a while... It is a great feature. Unfortunately I'm not able to receive all telemetry. I'm using 9xr-pro djt with x8r receiver. Only working sport connection d5 to sport signal, d4 to sport gnd I'm receiving: no of sat, hoop, flight mode, arm/disarm What do I need to change...

How do you connect APM to the frsky receiver ?

I'm away until 14th, I'd like to test it after my return
Thomas

Which Version of ArduCoper do you use. It is possible that different Versions return different telemetry results ? I've tried 2 ArduCopter Versions with different feedback. both Show - "Armed-Disarmed" and some of the flight Modi (not Pos_Hold) also ArduCoper 3.1.4 - display of "SAT&q...