openrcforums

Thanks Mike, Its fixed, I don't understand it, but someone told me to go to the ch6 mix and insert a new mix and select P3 as the source and now my servo works. I still need to figure out what to do with my connect/wiring issues for the receiver, I can't have channels cutting out. I appreciate all y...

My problem at this point is I don't know how to setup the pot on any channel, do I just mix ch6 and set the source to P3? Someone else told me to set the source to ch6 and the switch to a pot, but the pots arn't an option in switch settings, he was a 9XR guy.

Dave

No it still didn't work. I'm having another problem if you could have any input on, I live in Florida, with extreme humidity and I noticed once in a while that channels 1 through 4 sometimes cut out, but then if I play with the connectors they will come back. This receiver has been in some really ba...

Thanks Mike, Yes channels 1-4 work great and channel 8 works, which is set for a switch to turn on auto tune for my flight controller. I checked all the other items you mentioned and PPM Drive was set to Open Drain so I changed it to FullDrive. Currently I'm modifying my transmitter module for telem...

FrSky DJT transmitter and FrSky D8R-II PLUS receiver. The servo is on ch6 , so I setup a mix on ch6 with pot3 as the source am I missing something in the settings? The hardware was all the same when it worked the only difference is the new 9XR Pro.
Thanks Mike.

Yes to all the above, but all the pots will do this regardless of if they are setup to be used or not. There must be something wrong with the way I'm setting up its use. Thanks for the reply.
Dave

I have a servo connected to my receiver(FrSky) on channel 6, but when I select P3 at the top of the mixer screen it doesn't work, is there something I'm missing? When I set it up on my old 9X it worked great.
Thanks,
Dave