openrcforums

hi jhsa I tried a new model and all seems to be operating ok
I will be able to test more memories and different mixes later so hopefully I wont end up with a fancy boat anchor

Cheers

As João asked, next: "go to the mixer menu, and tell us what you have there for Ch1 to Ch4." Since the telltales move in the boxes, your sticks are working correctly, so this is very likely just a setting or two that is not correct. The stock firmware is an earlier version of ersky9x. Mik...

You mean like this? 9XR-PRO_WIRING.pdf All I did was to view the images full size, right click on them and select "save image", then I dropped them into an open office document and exported it as a .pdf. Mike. The wiring diag maybe helpful. The LHS Gimbal is showing up in the scrn that sh...

Hi I'm back with both wrists strapped up but thankley I can use my fingers
The F/W is FrSky9X.
The original F/W had the same problem hence the re-flash
I hope all is well in Germany

Cheers Geoff

I will be out of action (both wrists operated on) for a couple of days so I will get back to you when I can

Thanks a bunch Geoff

Hi Joao I get the 2 squares and the sticks show movement in both boxes When I move to the screen with the bars, There is 3 bars on the Lhs of scrn and 1 at the top of the Rhs side. I am using Mode 1 so the Thro and Ail move the Lhs 2 bars at top but the Lhs stick has no effect on the other 2 bars Th...

After powering up for the first time ever and bound to a RX with 4 servos in the main outputs (ail thr rud ele) the rhs gimbal responded as normal but the lhs had no input to the servos at all.
This does not have any warranty so I cannot send it back.

Thanks heaps
I have installed the driver from Smartieparts and when I select Wrtite to TX a blank white box opens in the eePe screen and nothing happens

Thanks again

I dbl click on the ER9X file in the EEPROM editor then click yes in the "Write er9x .hex to flash memory This msg comes in the AVRDUDE scrn avrdude.exe: error : could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc Then an error box with "AVRDUDE did not finish correctly&q...