openrcforums

BTW - If anyone is looking for me, I'll be in the kitchen wiping the egg off my face

Cheers,
R

Phew!! Thanks João. Could have been Companion (I dabbled with that when I first got the 9xr, and before I started reading up on stuff here)
Looks like I was losing it

You guys really do a super job, thanks again.

Ruaidhri

Yep - unless I've lost the plot completely.
Having said that I could be just muddled - there's a lot of seriously bad stuff going on (healthwise) in the family lately

Regards
Ruaidhrí

Thanks. The problem is that while I can connect to the computer, read models to and from eepskye etc., when I try to simulate controls there is no movement on the computer whatsoever. When I frist used eepskye the simulated controls followed the movements on the tx. Now nothing

Regards,
Ruaidhrí

BTW:
Turnigy 9xr Pro
VERS: v. 3527-Mike
Date: 08.01.2016
Time: 11.12.59
SVN: ersky9x-r218
MOD: REVB-X

eePskye latest ("shows no available updates")

Sorry about the gap.

Tried everything I can think of - still no luck

Any thoughts please?

Regards
Ruaidhri

Don't think me bloody ignorant but I've to head out for a bit, and will be missing most of tomorrow, so please don't think I can't be bothered answering posts

Regards,
Ruaidhri

Nope - updated everything a few weeks ago and Mike and João kindly got me up and running. Here - http://openrcforums.com/forum/viewtopic.php?f=123&t=8581&hilit=Ruaidhri All worked fine until I tried eepskye this evening. By way of explanation I should note that a) I am a grandfather, and b) ...

Thanks Daedalus66

Yep - I get that, but while the models download from the tx to eepskye fine, the "simulate" doesn't respond to the sticks.

What's particularly irritating is that I had this working fine a few weeks ago!!

Looks like I'm getting senile

Cheers Ruaidhri

HI Folks, Prob me missing something stupid but I can't get the "simulate" function on eepSKYe working on my 9xr Pro. Ran eepSKYe Plugged in tx to USB Read from models etc no trouble but that's as far as it goes. Tried the same but running the program after connecting - no difference. Can s...

That vid is a fount of information - well worth continuing IMHO

Cheers,
Ruaidhri

Mike and João, Thank you both very much. You'll not be surprised to hear that by following your instructions to the letter all probs have been resolved - and yes, it was the 3v battery :-) luckily I had a bunch of the right ones from another of "Grandad's speriments" :D Have a think about ...

Thanks again chaps.

I'll have a dig tomorrow & report back

Cheers,
R

Thanks Mike.

I presume the coin cell battery is somewhere in the guts - I'll have a poke about tomorrow and check. Getting a bit boggle-eyed at the moment

Thanks again - and please see the "BTW" in the reply to João above.

Regards,
Ruaidhri

Thanks João - that was FAST!! Got the voice done as you suggested and doing fine. Looks like I'll have to redo my switch warnings, but that's no biggie. Hardware and eeprom now enabled thanks. There was in the original (Hobbyking) the ability to change two position switches to three position - can't...

Hi from Dublin - need some advice please. Turnigy 9XR Pro. Reflashed to Vers: v.3527-Mike Date: 08-01-2016 Time: 11:12:59 SVN: esky9x-r218 MOD: REVB-X , carefully following the guidelines. All seemed OK. BUT - Welcome voice has disappeared on switch-on (the file is there, I have sucessfully assigned...

Thanks João - got a lot from your vids

Cheers,
R

Just a quick thank you from an old fart in Dublin, back into model aircraft after decades.

I really appreciate the work the team are doing (although most of it is over my head!), and the friendly atmosphere here.

Cheers
Ruaidhri