openrcforums

Unfortunately it does not work, I attach some examples.
It looks like it allocates space for the writes, but does not write the real data.

When testing the logging to the sdcard, the file was partially filled with correct data and the rest with garbage. Thought I recognized audio file headers.

Would that be a problem of the sdcard, the sdcard write routines or the mass storage?

Looks good.

I love the flight fases!

Bertrand, what do you mean with the serial debug connection? Do you output debug information to COM2? I do have the cable for updating the D8R receivers, that is a rs232 cable as I can rememeber. Just connect the tx of the transmitter to the rx of the cable and the ground to the ground and set it to...

My tx does not boot after flashing r1399.
Cannot reflash or use mass storage.

First switch on the transmitter, than connect it to the PC. Otherwise it is in programming mode..

Fixed!! Works without errors. Thanks!
Will test more tomorrow, now beeeerrrrr

I jus tried android 4.1.1 on a Asus transformer and that works too without error messages.

Further test, what about unmounting from nautilus after a sync in the shell ? I did already try that, it does not work. I also tried to leave it alone for 10 minutes. If I find a usb stick, I will try kde :o to see if it works and if it gives a better error message. I tried also on osx and that wor...

Romolo, I was using the filemanager (nautilus), also very slow. Unmounting from the terminal does indeed work! Bertrand, the wireshark log of the external hd is to large for the forum, so I placed it on google drive. You can download it here: https://docs.google.com/open?id=0B-C0JTsnCESPLXdoYzU2MGRY...

I reverted your initial change and updated to latest version. It didn't work unfortunately .

The wireshark log is attached. I will make a log of a working device tomorrow.

bertrand35 wrote:I am 99% sure the problem is in the FW code! Would you make a wireshark capture on the USB port for me?

No problem. Changed the code. Wireshark log attached.
Got the same errormessage when unmounting.

Tested some more. Always the same error when unmounting. And a number of I/O errors in dmesg. But I removed a lot of files and updated the voice files on the card and that worked. But I had a strange glitch in the meters wav file (126). I tried to overwrite it, but couldn't get it done. It seemed li...

Mass storage seems to work, but got a problem when unmounting the drive on ubuntu 12.04 Could be a bad sd card I think. Screenshot Schermafdruk foutmelding mass storage 9x.png Dmesg: [31840.160980] usb 2-1.2: USB disconnect, device number 32 [31881.298615] usb 2-1.2: new full-speed USB device number...

Great news!!! Thanks!

I use a arduino pro mini indeed. I'm planning to do a wiki when it's working 100%.

This is my hub with temperature, vario and gps:

I finally have my gps code working in my custom frsky hub. I see the right coordinates on the gps telemetry screen. But the distance (Dist) field stays zero if I am going to walk with it. Tried to reset the fields with [long menu], but no luck. Is there some key combo needed to set the home? Or does...

It is great to hear that there is progress! I misread the diff, thought you enabled it..

I had a similar problem, but on my tx only the connector was damaged. I did solder a new connector (3s balance) just behind the connector, and all is good now.

OK, no problem, I'm patient. Thanks for and success with all the hard work!

Bertrand, I saw a svn commit with mass storage enabled! Does it work??

The Seeedstudio dso quad has also a cortex m3 and mass storage. The software for it is opensource. Maybe interesting to look into.

https://github.com/Seeed-Studio/DSOQuad_SourceCode

Mass storage is the only thing I miss. It would be really great if you could get that working!

That works! Thanks!

But it was not very intuitive. The setting under it "Beep Ctr" seems similar but must be configured totally different.

I can change the switches for the switch warning in companion9x and there is a setting for it in open9x.
But I cannot reach it. I can enable and disable the switch warnings, but not the individual switches.
The [right] and [menu] keys both toggle the checkbox.

How can I change them?

I run r1336.

I just tested the negative altitude with some test code in an arduino connected to the serial of the receiver. It just works! My sensor code already had automatic offset code. When I disabled that, I expected to see a negative value, but I kept seeing 0 at the transmitter. But I didn't know the tran...

== <en>guinea pig</en>

I can do that when I am home. But as far as I can remember it is just the version linked from the wiki..

That might actually work! To bad it is build into a plane. I have a big mouth, but a whole plane...