Search found 12 matches

by athlech
Thu May 28, 2015 8:31 pm
Forum: gruvin9x
Topic: FRsky-r1547 problems.. :(
Replies: 0
Views: 17200

FRsky-r1547 problems.. :(

Hi..

I have flashed my X9 with that firmware , But cant find any guide that works with it?
In my Telementry disp i cant find FRSKY? And havent found any pictures that looks like my,
I wanted the RSSI and there for not in need of the Hub, or ?

Should i change Firmware on the TX ?
by athlech
Thu May 14, 2015 3:59 pm
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

Got my new ASP Yestoday so now i have the transmitter working!
Super...

To bad my reciver got fucced.. :P
Switched polarity when i was going to bind them.. dah!

Well thx alot ! ;)
by athlech
Thu May 07, 2015 8:03 pm
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

tnx, will do that..
Cross my fingers that it´s only that.. :)
by athlech
Thu May 07, 2015 7:30 pm
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

I will order another ASP and try with that..
Hoping something is wrong with the usbasp..
by athlech
Mon May 04, 2015 10:44 am
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

jhsa, i have soldered pins there and tried that also..
Same error on SCK. :( sry, forgotten to mention that..

MikeB, Im sorry, think i miss read the schematics. The resistor is at pin 29 and not the 14nth witch is the isp/asp..

I have really read and tried before posting.. :/
by athlech
Mon May 04, 2015 9:24 am
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

Ive got the USBASP schematic now but cant se any resistors at miso / mosi
But there are one at the RESET R6 10K could it be that one?
Ive uploaded that also to the G.drive..
by athlech
Sun May 03, 2015 7:27 am
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

When i messured the atmel8a to the pinout i only get 2 ohms resistance?
But i have mailed the Maker of the asp and asked for the schematics.. If they now want to share.. :D

Have a USBISP also and updated my gdrive with that one..
by athlech
Sat May 02, 2015 7:50 pm
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

The mod i made it after is this, http://openrcforums.com/wiki/index.php/9x_Full_Mod_FrSky 1K Ohm SMD resistor and a 470 ohms resistor.. Uploaded all pictures on my g.drive.. hope thats ok.. https://drive.google.com/folderview?id=0B-Mq-SI-erD7fkZfUFI0NWhYOTkwbF93SjVtSUwwUEo0RVJWV0RTUnYwTllSMXdMQmR5ST...
by athlech
Sat May 02, 2015 11:53 am
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

Sry, yes i have resistors but dont know the ohm on them now. Will check that when i get home and post agin then. ;)
Super thx that you take the time. ;)
by athlech
Sat May 02, 2015 11:32 am
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

Okey, i will not use the -F but then why cant it set the sck? Tryed setting it on 1000hz but same error then. And when i used the -f i got that it could not read the id. I will desolder and try without telementry after work today and report back. Ells, i will order the lvl converter and redo it. :( ...
by athlech
Fri May 01, 2015 7:11 pm
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

Re: EEProm ERROR. ?

hi and thanks ! Well i got error "warning: cannot set sck period. please check for usbasp firmware update" and read somewhere then that it was usual with some asp.. But i wont do that agin now then.. :P I did the one without level converter.. ( http://www.rcgroups.com/forums/showthread.php...
by athlech
Fri May 01, 2015 4:21 pm
Forum: Electronic Mods
Topic: EEProm ERROR. ?
Replies: 20
Views: 21884

EEProm ERROR. ?

Hi everyone! I have now searched and tested almost everything.. I have solderd telementry mod and the flashing mod.. I have checked every connection like 10 times now.. and are sure there are no loose wires or bad connections.. But when i putt the Transmitter together and connect the asp i get EEPRO...

Go to advanced search