Search found 1584 matches
- Tue Mar 21, 2023 9:43 am
- Forum: Feedback
- Topic: Browser not supported
- Replies: 1
- Views: 7601
Browser not supported
Since yesterday, I no longer can access the forum. I get the message, that my browser is no longer supported and I should update the browser. My bad is, it's the latest version of Firefox, that is supported for Win XP and there is no newer version available anymore. That means, I had to buy a new co...
- Mon Feb 20, 2023 8:40 am
- Forum: Hardware
- Topic: Anyone identified a Stylus ??
- Replies: 4
- Views: 6363
- Thu Aug 25, 2022 7:57 am
- Forum: er9x model setup
- Topic: Turnigy 9X running ER9X setup to run a tank, how?
- Replies: 10
- Views: 11332
Re: Turnigy 9X running ER9X setup to run a tank, how?
Have a look on this post.
Maybe it can help
https://www.openrcforums.com/forum/view ... 31#p146931
Reinhard
Maybe it can help
https://www.openrcforums.com/forum/view ... 31#p146931
Reinhard
- Sun Aug 29, 2021 8:20 am
- Forum: openTx
- Topic: Looking for help with fixing/improving Trainer/Student behaviour.
- Replies: 6
- Views: 4111
Re: Looking for help with fixing/improving Trainer/Student behaviour.
At least for ER9x/Ersky9x (and I assume, Opentx works in a similar manner): as soon as you activate the trainer function via the trainer menu the value of a (master) stick is replaced with the value of the student channel value. That means stick value and student value are identical. But at least in...
- Mon Aug 23, 2021 4:22 pm
- Forum: openTx
- Topic: Looking for help with fixing/improving Trainer/Student behaviour.
- Replies: 6
- Views: 4111
Re: Looking for help with fixing/improving Trainer/Student behaviour.
Have a look here for a possible way (done with ER9x/Ersky9x, but should be possible with opentx also)
viewtopic.php?f=45&t=13313&p=153616#p153613
Reinhard
viewtopic.php?f=45&t=13313&p=153616#p153613
Reinhard
- Sun Aug 22, 2021 3:28 pm
- Forum: openTx
- Topic: Possible? Throttle down is neutral on fwd/rev ESC & use switch to reverse direction?
- Replies: 3
- Views: 2562
Re: Possible? Throttle down is neutral on fwd/rev ESC & use switch to reverse direction?
Be aware, that, at any time, you can switch your motor from full forward to full reverse!!
There was a similar question already here
viewtopic.php?f=96&t=13001
maybe it helps
Reinhard
There was a similar question already here
viewtopic.php?f=96&t=13001
maybe it helps
Reinhard
- Fri Jul 30, 2021 9:10 pm
- Forum: Other Electronic Projects
- Topic: DSO-068 DIY kit Oscilloscope Assembly Help !
- Replies: 13
- Views: 12823
Re: DSO-068 DIY kit Oscilloscope Assembly Help !
I believe that the version you have, is the latest (061)
I found this information in their forum for the DSO-068:
They obviously forgot to update the version number in the 061 version, so that it still displays the older version of 060
Reinhard
I found this information in their forum for the DSO-068:
They obviously forgot to update the version number in the 061 version, so that it still displays the older version of 060
Reinhard
- Thu Jul 22, 2021 7:52 am
- Forum: Other Electronic Projects
- Topic: DSO-068 DIY kit Oscilloscope Assembly Help !
- Replies: 13
- Views: 12823
Re: DSO-068 DIY kit Oscilloscope Assembly Help !
The signal looks a little noisy. What does it look like when you connect the input to ground instead of the test signal. Do you get a clean line? Can you try supplying power from a battery instead of a power supply? Did you check, if the firmware version of your set is the latest one ? (www.jyetech....
- Wed Jul 21, 2021 6:13 pm
- Forum: Other Electronic Projects
- Topic: DSO-068 DIY kit Oscilloscope Assembly Help !
- Replies: 13
- Views: 12823
Re: DSO-068 DIY kit Oscilloscope Assembly Help !
I don't have the DSO-068 nor its manual, only the DSO-138 ( the simpler one) but your description sounds ok. 1) that wire connects your scope input with the built in signal generator so that you display the waveform of the test signal. 2) you set the sensitivity of the scope to 2V/div and the amplit...
- Tue Jul 20, 2021 8:51 am
- Forum: Other Electronic Projects
- Topic: DSO-068 DIY kit Oscilloscope Assembly Help !
- Replies: 13
- Views: 12823
Re: DSO-068 DIY kit Oscilloscope Assembly Help !
The analog input has voltage dividers for the differnt input sensitivity (10mV. , .1V, 1V) This dividers are made with resistors. The divider relation of resistors is correct for low frequencies down to DC. But you have stray capacities from the board that are connected in parallel to the resistors....
- Fri May 21, 2021 9:13 pm
- Forum: Hardware
- Topic: Turnigy 9X THROTTLE WARNING
- Replies: 12
- Views: 7457
Re: Turnigy 9X THROTTLE WARNING
Sorry, my fault. I thought you got the warning as a voice message
Reinhard
Reinhard
- Fri May 21, 2021 6:08 pm
- Forum: Hardware
- Topic: Turnigy 9X THROTTLE WARNING
- Replies: 12
- Views: 7457
Re: Turnigy 9X THROTTLE WARNING
Is it possible, that you have incorrect sound files? That it, may be, should be the Welcome message instead of the throttle warning?
Reinhard
Reinhard
- Sun May 16, 2021 11:01 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: Telemetry from my RC sailing boat
- Replies: 2
- Views: 6884
Re: Telemetry from my RC sailing boat
What you describe is similar to what I built 10 years ago for my planes. A GPS module with a 433Mhz transceiver for the plane and a corresponding ground station transceiver feeding a Palm computer. This displayed several data and logged all GPS records onto an SD-card. Later I put the ground receive...
- Mon May 10, 2021 8:43 am
- Forum: Software
- Topic: Newbie and Turnigy 9x Problem
- Replies: 26
- Views: 15146
Re: Newbie and Turnigy 9x Problem
In the test versions thread https://www.openrcforums.com/forum/viewtopic.php?f=5&t=4598#p64969 there are three test versions especially for the green processor er9x-128Green.zip 20-Jul-2020 17:44 Test Build for '128 with "Green" processor, uses software watchdog. (92.12 KiB) Downloaded...
- Fri Apr 30, 2021 12:02 pm
- Forum: Software
- Topic: Newbie and Turnigy 9x Problem
- Replies: 26
- Views: 15146
Re: Newbie and Turnigy 9x Problem
Low contrast is obviously not your problem, as it is set to 25 in your eeprom file. Did you open the radio in the past? It could be, that the flat cable of the display is not seated correctly in its socket. btw. regarding your eeprom file, channel 6. You can replace the three line by this one: CH6 +...
- Thu Apr 29, 2021 4:46 pm
- Forum: Software
- Topic: Newbie and Turnigy 9x Problem
- Replies: 26
- Views: 15146
Re: Newbie and Turnigy 9x Problem
Could be that your contrast setting is to low If LCD contrast gone to MIN or MAX that can't not see nothing after loading ersky9x firmware, try this key sequence. 1. EXIT key 5 times or more. 2. Left key hold down, let it enter RADIO SETUP menu 3. MENU key once 4. try Left or Right key to adjust LCD...
- Wed Apr 28, 2021 9:05 am
- Forum: Hardware
- Topic: 9XR Pro Screen not working on power up,
- Replies: 8
- Views: 5705
Re: 9XR Pro Screen not working on power up,
9XR Pro dead ============ I suspect that I have killed my radio when trying to check the voltages on the pins in the module bay. Maybe I inadvertently shorted something... Now when I switch on, the screen remains blank Measure R9 on the RF module board, inside the radio of course, not inside the RF...
- Thu Apr 08, 2021 9:18 pm
- Forum: openTx
- Topic: Old Turnigy 9X, ER9X to OpenTX?
- Replies: 14
- Views: 10850
Re: Old Turnigy 9X, ER9X to OpenTX?
I do have copies of the sourcecode from github on my pc (versions 2.0.0, 2.0.9, 2.0.14, 2.0.17, 2.1.1, 2.1.2, 2.1.3, 2.1.6, 2.1 7, 2.1.8). Can you compile from source code? I tested v 2.1.8 and it compiles, so I assume, the other versions will also be compilable. But there is the wide field of possi...
- Sun Apr 04, 2021 6:09 pm
- Forum: openTx
- Topic: Switchless trainer mode?
- Replies: 5
- Views: 4602
Re: Switchless trainer mode?
I have done that for ER9x, but I assume it is possible in OpenTx also It's done mostly in the trainer menu where the slave channels replace the radio channel under certain conditions that are made via some logical switches. L1 |v| < val Rud 5 AIL L2 |v| < val Ele 5 AIL L3 OR L5 TRN AIL L4 |v| < val ...
- Mon Mar 15, 2021 8:52 am
- Forum: Other Radios
- Topic: Updated DIY OTx radio?
- Replies: 2
- Views: 5013
- Thu Feb 11, 2021 12:10 pm
- Forum: erskyTx (was ersky9x)
- Topic: KingRadio TX18S
- Replies: 48
- Views: 35505
Re: KingRadio TX18S
Might be you have to power on the radio with "Hardware Menu enabled" (even though it should appear in the Display menu; Left Trim left when powering on). My Display menu has the options of Contrast Brightness Light switch Light on Key Light on Stk Mv Flash on Beep Rotate Screen Reverse Scr...
- Thu Feb 11, 2021 9:05 am
- Forum: erskyTx (was ersky9x)
- Topic: KingRadio TX18S
- Replies: 48
- Views: 35505
Re: KingRadio TX18S
In "radio setup" - "Display" tick the "Rotate Screen"erSKY flash screen upside down.
That will rotate your screen
Reinhard
- Wed Feb 10, 2021 11:43 pm
- Forum: erskyTx (was ersky9x)
- Topic: KingRadio TX18S
- Replies: 48
- Views: 35505
Re: KingRadio TX18S
I have Ersky TX (9xR pro) but no TX18S
Reinhard
Reinhard
- Wed Feb 10, 2021 10:18 am
- Forum: erskyTx (was ersky9x)
- Topic: KingRadio TX18S
- Replies: 48
- Views: 35505
Re: KingRadio TX18S
If I install erskyTX for TX18S ... and somethings not quite right ? can the original openTX be put back ? I know that sounds ungrateful - its not meant to be. You can (and should) download the existing firmware and eeprom of your radio before you flash a new software. eePsky allows you that downloa...
- Fri Feb 05, 2021 10:04 am
- Forum: openTx
- Topic: Motor Inertia simulation
- Replies: 9
- Views: 4854
Re: Motor Inertia simulation
In the past, I collected tips, that I thought, could be useful some times
I add a collection of possible mixes that control the speed of a servo movement depending on the stick position (ER9x/ERSkyTx as well as openTx).
Check, if there is something helful for you.
Reinhard
I add a collection of possible mixes that control the speed of a servo movement depending on the stick position (ER9x/ERSkyTx as well as openTx).
Check, if there is something helful for you.
Reinhard
- Sat Jan 09, 2021 9:06 am
- Forum: Hardware
- Topic: Turnigy 9x Dual module (?)
- Replies: 7
- Views: 5328
Re: Turnigy 9x Dual module (?)
Check your switch.
Normally the common pin is in the middle and is connected either to the left or to the right pins.
That means, battery has to be connected to the middle pins and the modules to the right / left pins of the switch.
Reinhard
Normally the common pin is in the middle and is connected either to the left or to the right pins.
That means, battery has to be connected to the middle pins and the modules to the right / left pins of the switch.
Reinhard
- Tue Jan 05, 2021 10:14 am
- Forum: General help (FrSky Taranis radio)
- Topic: disabling a switch by a logical switch
- Replies: 4
- Views: 5162
Re: disabling a switch by a logical switch
And you can do the preselection with a momentary switch Throttle cut switch is used for throttle cut, trainer switch is used as direction preselection switch For every motor direction you have the full range of the throttle stick (-100 to +100) The motor direction can be preselected at any throttle ...
- Wed Dec 30, 2020 11:25 pm
- Forum: General help (FrSky Taranis radio)
- Topic: disabling a switch by a logical switch
- Replies: 4
- Views: 5162
Re: disabling a switch by a logical switch
And you can even do it without an auxilliary channel, al least with ER9x and ERSKy9x with the Latch function of the logic switches (don't know if opentx has this function too). L1 Latch LD LE LD v<val Thr -98 THR LE v<val Thr -98 !THR // onlly the last 6 switches can work with inverted switches (!TH...
- Wed Dec 23, 2020 5:19 pm
- Forum: openTx model setup
- Topic: wing with 4 servos, 2 ail, 2 flaps - cant get it right...
- Replies: 1
- Views: 4959
Re: wing with 4 servos, 2 ail, 2 flaps - cant get it right...
I searched the forum for my old entries of how I have programmed my HK Phoenix2000 for ER9x and OpenTX (nowadays really old versions) With probably some minor adaptions, I still fly it with this programming. Different to your proposal, for craw I use ailerons up and flaps down. In the descriptions, ...
- Tue Dec 15, 2020 9:56 am
- Forum: General help (FrSky Taranis radio)
- Topic: disabling a switch by a logical switch
- Replies: 4
- Views: 5162
Re: disabling a switch by a logical switch
You can do it even easier, without curves
(I just recognized, that I didn't post the curves. Y-value of c1 goes from 0 to +100%, for c2 from 0 to -100%)
Replace the first two lines with the following lines
CH3 +50% Thr (L1) Offset(50%)
-50% Thr (!L1) offset(-50%)
Reinhard
(I just recognized, that I didn't post the curves. Y-value of c1 goes from 0 to +100%, for c2 from 0 to -100%)
Replace the first two lines with the following lines
CH3 +50% Thr (L1) Offset(50%)
-50% Thr (!L1) offset(-50%)
Reinhard